Delfield SAFRI1-S User Manual
Specication Line®
Self-Contained Solid Door Roll-In Freezer
Models
One section Two section Three section
SSFRI1-S SSFRI2-S SSFRI3-S Stainless exterior and interior full door
SAFRI1-S SAFRI2-S SAFRI3-S Stainless exterior and aluminum interior full door
SMFRI1-S SMFRI2-S SMFRI3-S Stainless front aluminum exterior and interior full door
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
Specication Line®: Solid Door Roll-In Freezer
SSFRI2-S
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a switch
mounted in the hinge assembly to protect against breakage. Door
openings are protected with heavy gauge stainless steel breaker strips.
An air duct shall be mounted to the ceiling assuring low velocity, even
air movement throughout the cabinet interior.
Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each door
has two edge mount, self closing, cam lift style hinges. Doors can be
removed from the cabinet without the use of tools. Metal door handle
shall be recessed into the door for easy grip without impacting aisle
space. Keyed door lock is mounted in the door next to the handle.
Standard Features
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior
(SA)
• Aluminum interior and exterior, stainless
front (SM)
• Built in door locks with heavy duty strikes
• Recessed metal door handle
• Pressure relief valve is standard to prevent
door vapor lock
• Exterior digital thermometer with high/
low temperature alarm
• Easy to use electronic control
Options &
Accessories
• Security (prison) package
• Door eld rehingability
• Stainless steel interior door liner
• Stainless steel back
• Laminate on front, sides and back
• Bottom mount electrical
• Stainless steel banking strip
• Heat shield end
• 230-50-1 electrical
• 220-60-1 electrical
• Easy access “ip up” shroud
• Tough ABS interior door liners
• 10’ attached cord and plug on 115V units
• Stainless steel breaker strips
• High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
• Energy savings door heater switch
• Two year parts & labor warranty
• Five year compressor warranty
Lock engages into a heavy duty strike mounted to the cabinet face.
Door gaskets are magnetic and mount to the door snapping in place
and are removable without tools.
Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between -5ºF and 0ºF in heavy use food service operations. Refrigerant
is metered using a highly responsive thermostatic expansion
valve. System is controlled using Deleld’s ACT-Advanced Control
Technology electronic temperature control, which provides improved
pull down times, reduces compressor cycling and longer compressor
life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.
Electrical: Standard electrical on one section units shall be 115V,
60 Hz single phase. A 10’ cord and plug is supplied and attached to
a junction box mounted on the exterior top of the cabinet. Two and
three section units shall be 115/208-230 and will require hardwire
connections.
Only Models
SSFRI2-S, SSFRI3-S,
SAFRI2-S, SAFRI3-S,
SMFRI2-S, SMFRI3-S
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
66.00”
167.6cm
98.00”
248.9cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
98.00”
248.9cm
34.00”
86.4cm
94.00”
238.8cm
30.00"
76.2cm
72.00"
182.9cm
89.00”
226.1cm
34.00”
86.4cm
34.00”
86.4cm
66.00”
167.6cm
98.00”
248.9cm
SPECIFICATION LINE SPECIFICATION LINE
30.00”
76.2cm
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
66.00”
167.6cm
98.00”
248.9cm
SPECIFICATION LINE
34.00”
86.4cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
98.00”
248.9cm
34.00”
86.4cm
94.00”
238.8cm
66.00”
167.6cm
98.00”
248.9cm
34.00”
86.4cm
62.00”
157.5cm
94.00”
238.8cm
CONDENSING UNIT
CONDENSING UNIT
72.00”
182.9m
30.00”
76.2cm
34.00”
86.4cm
30.00”
76.2cm
PLAN VIEW
SSFRI1-S, SAFRI1-S, SMFRI1-S
SPECIFICATION LINE
ELEVATION VIEW
SSFRI1-S, SAFRI1-S, SMFRI1-S
34.00”
86.4cm
66.00”
167.6cm
62.00”
157.5cm
PLAN VIEW
SSFRI2-S, SAFRI2-S, SMFRI2-S
ELEVATION VIEW
SSFRI2-S, SAFRI2-S, SMFRI2-S
CONDENSING UNIT
98.00”
248.9cm
94.00”
34.00”
86.4cm
SPECIFICATION LINE
238.8cm
PLAN VIEW
SSFRI3-S, SAFRI3-S, SMFRI3-S
ELEVATION VIEW
SSFRI3-S, SAFRI3-S, SMFRI3-S
CONDENSING UNIT
34.00”
86.4cm
SPECIFICATION LINE
Self-Contained Solid Door Roll-In Freezer
30.00”
76.2cm
30.00"
89.00”
226.1cm
182.9cm
END VIEW
1 SECTION UNITS
Mechanical Data
72.00"
76.2cm
90.30”
229.4cm
MODEL NUMBER V/Hz/Ph AMPS
SSFRI1-S, SSFRI1-SH, SAFRI1-S
SSFRI2-S, SSFRI2-SH, SAFRI2-S
SSFRI3-S, SSFRI3-SH, SAFRI3-S
Specication Line®
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
115/60/1 7.8 36.15 N/A N/A 1/2 1516
115/208-230
/60/1
115/208-230
/60/1
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
10.0 74.12 N/A N/A 1 4793
11.8 113.28 N/A N/A 1-1/2 5394
2 SECTION UNITS
STORAGE
CU.FT.
72.00”
182.9m
END VIEW
SHELVES
SQ.FT.
30.00”
76.2cm
72.00”
89.88”
228.3cm
NO. OF
SHELVES
Printed in the U.S.A.
DSSSFRI
07/11
H.P.
BTU/HR
SYSTEM CAP
182.9m
END VIEW
3 SECTION UNITS
SHIP
WEIGHT
497lbs
(225kg)
824lbs
(374kg)
1128lbs
(512kg)
NEMA
PLUG
ENERGY
(KWH/Day)
5-15P 11.57
N/A 21.02
N/A 25.70
Loading...