![](/html/18/18fd/18fd140a98179208c63346076bd6733fb9c391b04ea594c3dc40cdca09696c53/bg1.png)
Specication Line®
Self-Contained Solid Door Pass-Thru Freezer
Models
One section Two section Three section
SSFPT1-S SSFPT2-S SSFPT3-S Stainless exterior and interior full door
SSFPT1-SH SSFPT2-SH SSFPT3-SH Stainless exterior and interior half door
SAFPT1-S SAFPT2-S SAFPT3-S Stainless exterior and aluminum interior full door
SAFPT1-SH SAFPT2-SH SAFPT3-SH Stainless exterior and aluminum interior half door
SMFPT1-S SMFPT2-S SMFPT3-S Stainless front aluminum exterior and interior full door
SMFPT1-SH SMFPT2-SH SMFPT3-SH Stainless front aluminum exterior and interior half door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
Specication Line®: Solid Door Pass-Thru Freezer
SSFPT2-SH
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling,
the interior incandescent light is controlled automatically through a
switch mounted in the hinge assembly to protect against breakage.
Door openings are protected with heavy gauge stainless steel
breaker strips. An air duct shall be mounted to the ceiling assuring
low velocity, even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from the cabinet without the use of tools. Metal
Standard Features
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior (SA)
•
Aluminum interior and exterior, stainless front
•
(SM)
Built in door locks with heavy duty strikes
•
Recessed metal door handle
•
Pressure relief valve is standard to prevent door
•
vapor lock
Exterior digital thermometer with high/low
•
temperature alarm
Easy to use electronic control
•
Easy access “ip up” shroud
•
Three wire shelves per section - SA/SS standard
•
with chrome plated shelves and SM standard
with epoxy coated shelves
Tough ABS interior door liners
•
10’ attached cord and plug on 115V units
•
6” adjustable stainless steel legs
•
Stainless steel breaker strips
•
High density foamed in place environmentally
•
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low
Energy savings door heater switch
•
Two year parts & labor warranty
•
Five year compressor warranty
•
door handle shall be recessed into the door for easy grip without
impacting aisle space. Keyed door lock is mounted in the door next
to the handle. Lock engages into a heavy duty strike mounted to
the cabinet face. Door gaskets are magnetic and mount to the door
snapping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally
friendly R404A refrigerant is used. The system has the capability
of maintaining between -5ºF and 0ºF in heavy use food service
operations. Refrigerant is metered using a highly responsive
thermostatic expansion valve. System is controlled using Deleld’s
ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.
Electrical: Standard Electrical on one section units shall be 115V, 60
Hz single phase. A 10’ cord and plug is supplied and attached to a
junction box mounted on the exterior top of the cabinet. Two and
three section units shall be 115/208-230 and will require hardwire
connections.
Options &
Accessories
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Security (prison) package
6” polyurethane casters
Door eld rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
![](/html/18/18fd/18fd140a98179208c63346076bd6733fb9c391b04ea594c3dc40cdca09696c53/bg2.png)
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
SPECIFICATION LINE SPECIFICATION LINE SPECIFICATION LINE
75.00”
190.5cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
83.00”
210.8cm
79.00"
200.7cm
34.00”
86.4cm
31.00"
78.7cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
206.0cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
75.00”
190.5cm
29.00”
73.7cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
83.00”
210.8cm
79.00"
200.7cm
36.25”
92.1cm
CONDENSING UNIT
CONDENSING UNIT
CONDENSING UNIT
6.12
89.88”
228.3cm
89.88
6.12”
15.5cm
82.30”
209.0cm
75.00”
190.5cm
58.00”
147.3cm
31.00”
78.7cm
72.00”
182.9m
30.00”
76.2cm
CONDENSING UNIT
6.12
81.87
6.12”
15.5cm
84.50”
214.6cm
75.00”
190.5cm
58.00”
147.3cm
31.00”
78.7cm
PLAN VIEW
SSFPT1-S, SAFPT1-S,
SMFPT1-S SSFPT1-SH,
SAFPT1-SH, SMFPT1-SH
ELEVATION VIEW
SSFPT1-S, SAFPT1-S,
Self-Contained Solid Do or Pass-Thru Freezer
SMFPT1-S
PLAN VIEW
SSFPT2-S, SAFPT2-S, SMFPT2-S
SSFPT2-SH, SAFPT2-SH, SMFPT2-SH
ELEVATION VIEW
SSFPT1-SH, SAFPT1-SH,
SMF1S-SH
ELEVATION VIEW
SSFPT2-S, SAFPT2-S, SMFPT2-S
SSFPT3-SH, SAFPT3-SH, SMFPT3-SH
PLAN VIEW
SSFPT3-S, SAFPT3-S, SMFPT3-S
ELEVATION VIEW
SSFPT2-SH, SAFPT2-SH, SMFPT2-SH
END VIEW
1 SECTION UNITS
END VIEW
2 SECTION UNITS
ELEVATION VIEW
SSFPT3-S, SAFPT3-S, SMFPT3-S
ELEVATION VIEW
SSFPT3-SH, SAFPT3-SH, SMFPT3-SH
Mechanical Data
STORAGE
MODEL NUMBER VOLTAGE AMPS
SSFPT1-S, SSFPT1-SH, SAFPT1-S,
Specication Line®
SAFPT1-SH, SMFPT1-S, SMFPT1-SH
SSFPT2-S, SSFPT2-SH, SAFPT2-S,
SAFPT2-SH, SMFPT2-S, SMFPT2-SH
SSFPT3-S, SSFPT3-SH, SAFPT3-S,
SAFPT3-SH, SMFPT3-S, SMFPT3-SH
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
115 11.5 26.64 12.81 3 3/4 1923
115/208-230 10.0 55.42 27.54 6 1 4793
115/208-230 10.0 84.19 42.27 9 1 1/2 5185
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
CU.FT.
SHELVES
SQ.FT.
NO. OF
SHELVES
Printed in the U.S.A.
DSSSFPT
05/10
UNIT H.P.
BTU/HR
SYSTEM CAP
SHIP WEIGHT
672lbs
(305kg)
1001lbs
(454kg)
1268lbs
(575kg)
END VIEW
3 SECTION UNITS
NEMA
ENERGY
PLUG
(KWH)
5-15P 11.30
N/A 14.26
N/A 33.00