Delfield SAFPT1-S User Manual

Specication Line®

Self-Contained Solid Door Pass-Thru Freezer

Models

One section

SSFPT1-S Stainless exterior and interior full door

SSFPT1-SH Stainless exterior and interior half door

SAFPT1-S Stainless exterior and aluminum interior full door

SAFPT1-SH Stainless exterior and aluminum interior half door

SMFPT1-S Stainless front aluminum exterior and interior full door

SMFPT1-SH Stainless front aluminum exterior and interior half door

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Specication Line®: Solid Door Pass-Thru Freezer

SSFPT1-S

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners
and recessed oor. Three wire shelves are provided, SA/SS standard
shelves are chrome plated, SM standard shelves are epoxy coated.
Shelves rest on clips which are adjustable on 1” increments on
stainless steel pilasters axed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling,
the interior incandescent light is controlled automatically through a
switch mounted in the hinge assembly to protect against breakage.
Door openings are protected with heavy gauge stainless steel breaker
strips. An air duct shall be mounted to the ceiling assuring low
velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each door
has two edge mount, self closing, cam lift style hinges. Doors can be
removed from the cabinet without the use of tools. Metal door handle

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front

(SM)

• Built in door locks with heavy duty strikes

• Recessed metal door handle

• Pressure relief valve is standard to prevent door

vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy to use electronic control

• Easy access “ip up” shroud

• Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard
with epoxy coated shelves

• Tough ABS interior door liners

• 10’ attached cord and plug on 115V units

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

shall be recessed into the door for easy grip without impacting aisle
space. Keyed door lock is mounted in the door next to the handle.
Lock engages into a heavy duty strike mounted to the cabinet face.
Door gaskets are magnetic and mount to the door snapping in place
and are removable without tools.

Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between -5ºF and 0ºF in heavy use food service operations. Refrigerant
is metered using a highly responsive thermostatic expansion
valve. System is controlled using Deleld’s ACT-Advanced Control
Technology electronic temperature control, which provides improved
pull down times, reduces compressor cycling and longer compressor
life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum eciency. Evaporator condensate
is eliminated using an energy ecient hot gas system.

Electrical: Standard electrical shall be 115V, 60 Hz single phase. A 10’
cord and plug is supplied and attached to a junction box mounted on
the exterior top of the cabinet.

Options &
Accessories

• Security (prison) package

• 6” polyurethane casters

• Door eld rehingability

• Stainless steel interior door liner

• Additional shelves

• Tray slides

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 230-50-1 electrical

• 220-60-1 electrical

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]

www.delfield.com

30"

58"

6.12

81.12

29.00”

73.7cm

34.00”

86.4cm

56.00”

142.2cm

SPECIFICATION LINE SPECIFICATION LINE

25.00"

63.5cm

52.00"

132.1cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

30.00"

76.2cm

58.00"

147.3cm

6.12”

15.5cm

81.12”

205.0cm

29.00

34.00

56.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

75.00”

190.5cm

56.00”

142.2cm

52.00"

132.1cm

36.25”

92.1cm

29.00”

56.00”

142.2cm

52.00"

132.1cm

36.25”

92.1cm

73.7cm

Self-Contained Solid Door Pass-Thru Freezer

25.00"

63.5cm

Plan View

SSFPT1-S, SAFPT1-S,

SMFPT1-S SSFPT1-SH,

SAFPT1-SH, SMFPT1-SH

SPECIFICATION LINE

36.25”

92.1cm

SPECIFICATION LINE

75.00”

190.5cm

31.00"

81.12”

206.0cm

58.00"

147.3cm

78.7cm

Elevation View

SSFPT1-S, SAFPT1-S,

SMFPT1-S

Mechanical Data

MODEL NUMBER V/Hz/Ph AMPS

SSFPT1-S, SSFPT1-SH, SAFPT1-S,

Specication Line®

SAFPT1-SH, SMFPT1-S, SMFPT1-SH

Elevation View

SSFPT1-SH, SAFPT1-SH,

SMF1S-SH

115/60/1 11.0 26.64 12.81 3 3/4 1923

STORAGE

CU.FT.

SHELVES

SQ.FT.

NO. OF

SHELVES

Deleld reserves the right to make changes to the design or specications without prior notice.

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]
www.delfield.com

Printed in the U.S.A.
DSSSFPT
10/11

6.12”

15.5cm

H.P.

BTU/HR

SYSTEM CAP

End View

All Units

SHIP WEIGHT

672lbs

(305kg)

NEMA

5-15P 11.30

ENERGY

PLUG

(KWH/Day)