Specication Line®
Self-Contained Solid Door Narrow Reach-In Freezer
Models
One section Two section
SSF1N-S SSF2N-S Stainless exterior and interior full door
SSF1N-SH SSF2N-SH Stainless exterior and interior half door
SAF1N-S SAF2N-S Stainless exterior and aluminum interior full door
SAF1N-SH SAF2N-SH Stainless exterior and aluminum interior half door
SMF1N-S SMF2N-S Stainless front aluminum exterior and interior full door
SMF1N-SH SMF2N-SH Stainless front aluminum exterior and interior half door
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
Specication Line®: Solid Door Narrow Reach-In Freezer
SSF1N-S
Specifications
Exterior: SS and SA models shall have corrosion resistant
stainless steel exterior cabinet sides, front and shroud. SM
models shall have corrosion resistant aluminum on exterior
cabinet sides and will have stainless front and shroud. All units
shall have the upper shroud hinged with a gas assist stay open
feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless
steel (SS models) or heavy gauge aluminum (SA and SM
models). Bottom and top surfaces shall be die stamped to
provide radius corners and recessed oor. Three wire shelves
are provided per section, SA/SS standard shelves are chrome
plated, SM standard shelves are epoxy coated. Shelves rest on
clips which are adjustable on 1” increments on stainless steel
pilasters axed to the cabinet interior. Pilasters are removable
without tools for cleaning. Mounted to the interior ceiling, the
interior incandescent light is controlled automatically through
a switch mounted in the hinge assembly to protect against
breakage. Door openings are protected with heavy gauge
stainless steel breaker strips. An air duct shall be mounted to the
ceiling assuring low velocity, even air movement throughout
the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel.
Interior liner shall be resilient high impact ABS material formed
to protrude beyond the door gasket to protect the gasket from
tearing. Each door has two edge mount, self closing, cam lift
style hinges. Doors can be removed from the cabinet without
Standard Features
Stainless steel interior and exterior (SS)
•
Stainless steel exterior, aluminum interior (SA)
•
Aluminum interior and exterior, stainless front (SM)
•
Built in door locks with heavy duty strikes
•
Recessed metal door handle
•
Pressure relief valve is standard to prevent door
•
vapor lock
Exterior digital thermometer with high/low
•
temperature alarm
Easy to use electronic control
•
Easy access “ip up” shroud
•
Three wire shelves per section - SA/SS standard with
•
chrome plated shelves and SM standard with epoxy
coated shelves
Tough ABS interior door liners
•
10’ attached cord and plug
•
6” adjustable stainless steel legs
•
Stainless steel breaker strips
•
High density foamed in place environmentally
•
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs low
Energy savings door heater switch
•
Two year parts & labor warranty
•
Five year compressor warranty
•
the use of tools. Metal door handle shall be recessed into the
door for easy grip without impacting aisle space. Keyed door
lock is mounted in the door next to the handle. Lock engages
into a heavy duty strike mounted to the cabinet face. Door
gaskets are magnetic and mount to the door snapping in place
and are removable without tools.
Refrigeration system: All components are mounted to the
exterior of the cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. The system
has the capability of maintaining between -5ºF and 0ºF in
heavy use food service operations. Refrigerant is metered using
a highly responsive thermostatic expansion valve. System is
controlled using Deleld’s ACT-Advanced Control Technology
electronic temperature control, which provides improved
pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil
is free of ice and is operating at optimum eciency. Evaporator
condensate is eliminated using an energy ecient hot gas
system.
Electrical: Standard electrical connections shall be 115V, 60 Hz
single phase. A 10’ cord and plug is supplied and attached to a
junction box mounted on the exterior top of the cabinet.
Options &
Accessories
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Security (prison) package
6” polyurethane casters
Door eld rehingability
Stainless steel interior door liner
Additional shelves
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
PLAN VIEW
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
25.00”
63.5cm
34.00”
86.4cm
21.00"
53.3cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
25.00”
63.5cm
36.25”
92.1cm
48.00”
121.9cm
21.00"
53.3cm
44.00"
111.8cm
25.00”
63.5cm
34.00”
86.4cm
SPECIFICATION LINE
SPECIFICATION LINE
21.00"
53.3cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
SPECIFICATION LINE
SPECIFICATION LINE
25.00”
63.5cm
36.25”
92.1cm
48.00”
121.9cm
21.00"
53.3cm
44.00"
111.8cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
36.25”
92.1cm
SPECIFICATION LINE
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
SPECIFICATION LINE
48.00”
121.9cm
44.00"
111.8cm
36.25”
92.1cm
SPECIFICATION LINE
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
SPECIFICATION LINE
SPECIFICATION LINE
36.25”
92.1cm
48.00”
121.9cm
44.00"
111.8cm
36.25”
92.1cm
SPECIFICATION LINE
48.00”
121.9cm
44.00"
111.8cm
36.25”
92.1cm
SSF1N-S, SAF1N-S, SMF1N-S
SSF1N-SH, SAF1N-SH, SMF1N-SH
PLAN VIEW
SSF2N-S, SAF2N-S, SMF2N-S
SSF2N-SH, SAF2N-SH, SMF2N-SH
ELEVATION VIEW
SSF1N-S, SAF1N-S,
Self-Contained Solid Do or Narrow Reach -In Freezer
SMF1N-S
Mechanical Data
MODEL NUMBER VOLTAGE AMPS
Specication Line®
SSF1N-S, SSF1N-SH, SAF1N-S,
SAF1N-SH, SMF1N-S, SMF1N-SH
SSF2N-S, SSF2N-SH, SAF2N-S,
SAF2N-SH, SMF2N-S, SMF2N-SH
ELEVATION VIEW
SSF1N-SH, SAF1N-SH,
SMF1N-SH
ELEVATION VIEW
STORAGE
CU.FT.
SSF2N-S, SAF2N-S,
SMF2N-S
SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
SSF2N-SH, SAF2N-SH,
BTU/HR
SYSTEM CAP
115 7.8 20.97 10.59 3 1/2 1516
115 14.3 43.94 23.10 6 3/4 2648
ELEVATION VIEW
SMF2N-SH
END VIEW
ALL MODELS
WEIGHT
408lbs
(185kg)
680lbs
(308kg)
SHIP
NEMA
ENERGY
PLUG
(KWH)
5-15P 7.58
5-20P 11.13
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
Printed in the U.S.A.
DSSSFN
09/10