Delfield SAF1-GH User Manual

Specication Line®

Self-Contained Glass Door Reach-In Freezer

Models

One section Two section Three section

SSF1-G SSF2-G SSF3-G Stainless exterior and interior glass full door

SSF1-GH SSF2-GH SSF3-GH Stainless exterior and interior glass half door

SAF1-G SAF2-G SAF3-G Stainless exterior and aluminum interior glass full door

SAF1-GH SAF2-GH SAF3-GH Stainless exterior and aluminum interior glass half door

SMF1-G SMF2-G SMF3-G Stainless front aluminum exterior and interior glass full door

SMF1-GH SMF2-GH SMF3-GH Stainless front aluminum exterior and interior glass half door

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

Specication Line®: Glass Door Reach-In Freezer

SSF2-G

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel
exterior cabinet sides, front and shroud. SM models shall have corrosion
resistant aluminum on exterior cabinet sides and will have stainless front and
shroud. All units shall have the upper shroud hinged with a gas assist stay
open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS
models) or heavy gauge aluminum (SA and SM models). Bottom and top
surfaces shall be die stamped to provide radius corners and recessed oor.
Three wire shelves are provided per section, SA/SS standard shelves are
chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips
which are adjustable on 1” increments on stainless steel pilasters axed to
the cabinet interior. Pilasters are removable without tools for cleaning. A
uorescent light is mounted to the interior ceiling of each compartment,
the switch is part of the light assembly. Door openings are protected with
heavy gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the cabinet
interior.

Doors: Double paned tempered thermopane glass. Constructed with a
combination of extruded aluminum and PVC. Each door has two edgemount,
self-closing, cam lift style hinges. Doors can be removed from the cabinet
without the use of tools. Door handle is continuous along vertical dimension
of the door. Door gaskets are magnetic and mount to the door, snapping in

Standard Features

• Stainless steel interior and exterior (SS)

• Stainless steel exterior, aluminum interior (SA)

• Aluminum interior and exterior, stainless front

(SM)

• Built in door locks with heavy duty strikes

• Pressure relief valve is standard to prevent door

vapor lock

• Exterior digital thermometer with high/low
temperature alarm

• Easy to use electronic control

• Easy access “ip up” shroud

• Three wire shelves per section - SA/SS standard

with chrome plated shelves and SM standard
with epoxy coated shelves

• 10’ attached cord and plug on 115V units

• 6” adjustable stainless steel legs

• Stainless steel breaker strips

• High density foamed in place environmentally

friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps energy
costs low

• Energy savings door heater switch

• Two year parts & labor warranty

• Five year compressor warranty

place and removable with out tools. Keyed door lock is mounted to the door.
Lock engages into a heavy duty strike mounted to the cabinet face.

Refrigeration system: All components are mounted to the exterior of the
cabinet ceiling, outside the food zone and are assembled as one piece and
can be removed as one piece. Environmentally friendly R404A refrigerant
is used. The system has the capability of maintaining between -5ºF and
0ºF in heavy use food service operations. Refrigerant is metered using a
highly responsive thermostatic expansion valve. System is controlled using
Deleld’s ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor cycling and
longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice
and is operating at optimum eciency. Evaporator condensate is eliminated
using an energy ecient hot gas system.

Electrical: Standard electrical on one section units shall be 115V, 60 Hz
single phase. A 10’ cord and plug is supplied and attached to a junction box
mounted on the exterior top of the cabinet. Two and three section units shall
be 115/208-230 and will require hardwire connections.

Options &
Accessories

• Security (prison) package

• 6” polyurethane casters

• Door eld rehingability

• Additional shelves

• Tray slides

• Stainless steel back

• Laminate on front, sides and back

• Bottom mount electrical

• Stainless steel banking strip

• Heat shield end

• Stainless steel kick plate

• Laminate kick plate

• 4” stainless steel utility base

• 230-50-1 electrical

• 220-60-1 electrical

Only Models
SSR1-G, SSR1-GH,
SAR1-G, SAR1-GH,

SMR1-G, SMR1-GH

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone] or 989-773-7981
Fax: [phone]

www.delfield.com

56.00”

142.2cm

83.00”

210.8cm

52.00"

132.1cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

48.00”

121.9cm

44.00"

111.8cm

34.00”

86.4cm

83.00”

210.8cm

79.00"

200.7cm

34.00”

86.4cm

34.00”

86.4cm

30"

58"

6.12

81.12

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

56.00

34.00

83.00

34.00

SPECIFICATION LINE

CONDENSING UNIT

CONDENSING UNIT

CONDENSING UNIT

6.12

82.62

6.12

82.62

6.12

82.62

90.50

89.88”

228.3cm

72.00”

182.9m

30.00”

76.2cm

83.00

34.00

83.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE

30"

58"

6.12

81.12

29.00

34.00

56.00

34.00

83.00

34.00

SPECIFICATION LINE SPECIFICATION LINE

29.00”

73.7cm

25.00"

63.5cm

PLAN VIEW

SSF1-G, SAF1-G, SMF1-G

SSF1-GH, SAF1-GH, SMF1-GH

SPECIFICATION LINE

ELEVATION VIEW

SSF1-G, SAF1-G,

SMF1-G

34.00”

86.4cm

SPECIFICATION LINE

ELEVATION VIEW

SSF1-GH, SAF1-GH,

SMF1-GH

56.00”

142.2cm

52.00"

132.1cm

PLAN VIEW

SSF2-G, SAF2-G, SMF2-G

SSF2-GH, SAF2-GH, SMF2-GH

ELEVATION VIEW

SSF2-G, SAF2-G, SMF2-G

83.00”

210.8cm

34.00”

86.4cm

SPECIFICATION LINE

ELEVATION VIEW

SSF2-GH, SAF2-GH, SM2-GH

79.00"

200.7cm

PLAN VIEW

SSF3-G, SAF3-G, SMF3-G

SSF3-GH, SAF3-GH, SMF3-GH

SPECIFICATION LINE

81.12”

206.0cm

75.00”

190.5cm

6.12”

15.5cm

30.00”

76.2cm

58.00”

147.3cm

END VIEW

1 SECTION UNITS

Self-Contained Glass Door Reach-In Freezer

Mechanical Data

MODEL NUMBER V/Hz/Ph AMPS

ELEVATION VIEW

SSF3-G, SAF3-G, SMF3-G

SPECIFICATION LINE

SSF3-GH, SAF3-GH, SMF3-GH

STORAGE

CU.FT.

ELEVATION VIEW

SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.

SSF1-G, SAF1-G, SMF1-G 115/60/1 11.5 24.96 12.81 3 3/4 1923

SSF1-GH, SAF1-GH,
SMF1-GH

SSF2-G, SSF2-GH, SAF2-G,
SAF2-GH, SMF2-G, SMF2-GH

SSF3-G, SSF3-GH, SAF3-G,

Specication Line®

SAF3-GH, SMF3-G, SMF3-GH

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

115/60/1 11.5 24.96 12.81 3 3/4 1923

115/208-230

/60/1

115/208-230

/60/1

Phone: [phone] or 989-773-7981
Fax: [phone]
www.delfield.com

10.0 51.92 27.54 6 1 4793

11.4 78.89 42.47 9 1 5940

Printed in the U.S.A.
DSSSF-G
07/11

SPECIFICATION LINE

75.00”

190.5cm

82.00”

208.3cm

6.12”

15.5cm

BTU/HR

SYSTEM CAP

SHIP

WEIGHT

440lbs

(200kg)

440lbs

(200kg)

710lbs

(322kg)

960lbs

(435kg)

CONDENSING UNIT

30.00”

76.2cm

58.00”

147.3cm

END VIEW

2 & 3 SECTION UNITS

NEMA

ENERGY

PLUG

(KWH/Day)

5-15P 12.68

5-15P 11.76

N/A 19.95

N/A 29.07