Delfield SADHL2-SH General Manual

	Delfield
	™	®	Project ___________________________________
	Specification Line®		Item _____________________________________
			Approved _ _______________________________
			Quantity _ ________________________________
			CSI Section 11400
	Self-Contained Solid Door Two-Section Dual Temp		Date _____________________________________
	Refrigerator/Heated Reach-Ins

Models

Full door	Half door
SSDHL2-S	SSDHL2-SH
SSDHR2-S	SSDHR2-SH
SADHL2-S	SADHL2-SH
SADHR2-S	SADHR2-SH
SMDHL2-S	SMDHL2-SH
SMDHR2-S	SMDHR2-SH

Heated left hand stainless exterior and interior Refrigerator left hand stainless exterior and interior Heated left hand stainless exterior and aluminum interior

Refrigerator left hand stainless exterior and aluminum interior Heated left hand stainless front aluminum exterior and interior Refrigerator left hand stainless front aluminum exterior and interior

	Standard Features
	• Stainless steel interior and exterior (SS)
	• Stainless steel exterior, aluminum interior (SA)
	• Aluminum interior and exterior, stainless front
	(SM)
	• Built in door locks with heavy duty strikes
	• Recessed metal door handle
	• Pressure relief valve on refrigerated section is
	standard to prevent door vapor lock
	• Two exterior digital thermometers with high/
	low temperature alarm
	• Easy to use electronic control
	• Easy access “flip up” shroud
	• Three wire shelves per section
	• 10’ attached cord and plug
	• 6” adjustable stainless steel legs
	• Stainless steel breaker strips
	• High density foamed in place environmentally
	friendly, Kyoto Protocol Compliant, Non ODP
	(Ozone Depletion Potential), Non GWP (Global
	Warming Potential) polyurethane keeps energy
	costs low
SSDHL2-S	• Energy savings door heater switch
	• Two year parts & labor warranty
	• Five year compressor warranty

Options &

Accessories

•Security (prison) package

•6” polyurethane casters

•Door field rehingability

•Stainless steel interior door liner

•Additional shelves

•Tray slides

•Stainless steel back

•Laminate on front, sides and back

•Bottom mount electrical

•Stainless steel banking strip

•Heat shield end

•Stainless steel kick plate

•Laminate kick plate

•4” stainless steel utility base

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. In the refrigerator section, three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. In the heated section, three chrome plated shelves are provided per section. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior incandescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle

space. Keyed door lock is mounted in the door next to the handle. Lock

engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: The condensing unit is located on top of the refrigerator cabinet section, outside the food zone, behind the

removable upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling. Defrost is automatic. Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it is evaporated with the aid of

an electric heater. Refrigeration system is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption. Refrigerator compartment maintains between 27°F and 40°F.

Heating system: The heated section is designed to maintain temperatures between 120ºF and 200ºF. Heating elements are helical shaped, with tubular fins. High speed blower provides uniform airflow in the cabinet. Entire heating system is mounted to the exterior of the cabinet ceiling, outside the food zone. It is assembled as one piece and can be removed as one piece. Temperature is controlled by an

adjustable electronic thermostat. System on/off switch is located on the front exterior of the cabinet.

Electrical: Refrigeration system electronics shall have one 10’ cord and plug with single point connection. It is attached to a junction box mounted on the exterior top of the cabinet. Heated system standard electrical is 120/208-240 Volt, 60 Hz single phase. Connection must be hard wired to junction box on the exterior top of the cabinet.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]

<![if ! IE]>

<![endif]>Ins-Reach Refrigerator/Heated Temp Dual Section-Two Door Solid Line®: Specification

Delfield™ ®

<![if ! IE]>

<![endif]>Specification Line® Self-Contained Solid Door Two-Section Dual Temp Refrigerator/Heated Reach-Ins

56.00”

142.2cm

52.00"

132.1cm

PLAN VIEW

ALL MODELS

ELEVATION VIEW

SSDHL2-S, SADHL2-S, SMDHL2-S

SSDHR2-S, SADHR2-S, SMDHR2-S

34.00”

86.4cm

75.00”

190.5cm 30.00” 76.2cm

58.00”

147.3cm

81.12”

206.0cm

6.12”

15.5cm

ELEVATION VIEW

END VIEW

SSDHL2-SH, SADHL2-SH, SMDHL2-SH

ALL MODELS

SSDHR2-SH, SADHR2-SH, SMDHR2-SH

Mechanical Data

MODEL NUMBER

DESCRIPTION

VOLTAGE

AMPS

STORAGE

SHELVES

NO. OF

H.P.

BTU/HR

SHIP

NEMA

ENERGY

CU.FT.

SQ.FT.

SHELVES

SYSTEM CAP

WEIGHT

PLUG

(KWH)

SSDHL2-S. SADHL2-S, SMDHL2-S,

LEFT DR REF

115

6.8

24.96

12.81

3

1/4

2092

730lbs

5-15P

N/A

SSDHL2-SH, SADHL2-SH, SMDHL2-SH

RIGHT DR HTD

120/208-240

9.0

24.96

12.81

3

N/A

N/A

(331kg)

N/A

SSDHR2-S, SADHR2-S, SMDHR2-S,

LEFT DR HTD

120/208-240

9.0

24.96

12.81

3

N/A

N/A

730lbs

N/A

N/A

SSDHR2-SH, SADHR2-SH, SMDHR2-SH

RIGHT DR REF

115

6.8

24.96

12.81

3

1/4

2092

(331kg)

5-15P

Delfield reserves the right to make changes to the design or specifications without prior notice.

980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	Printed in the U.S.A.
Mt. Pleasant, Michigan 48858	Fax: [phone]	DSSSDH
	www.delfield.com	09/08