Delfield NSCF-48 Specifications
Free-Standing Self-Contained Milk & Ice Cream Dispenser
Short Form Specifications
Exterior sides shall be 20-gauge stainless steel. Top and corner supports shall be
16-gauge stainless steel, welded, ground and polished into one integral unit.
Interior shall have (2) separate compartments, one refrigerated and one freezer.
Inner liners shall be water-tight and constructed of 22-gauge stainless steel with
a 1.25" (3.2cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-inplace polyurethane insulation with a non-conductive top breaker strip.
Each opening shall have an insulated, stainless steel folding lid with high impact
plastic liner, molded rubber edge and black plastic handles.
(3) stainless steel louvers shall be installed in the end and sides of the cabinet to
allow proper air flow to the condensing unit.
Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators
shall be connected by removable platform carriers constructed of 18-gauge stainless
steel.
(6) anodized aluminum divider trays will be supplied per cabinet section. NOTE:
See chart on back for storage capacities.
Refrigeration system shall use HFC-404A refrigerant. Refrigerator section shall be
controlled by an EPR valve; the freezer section shall be controlled by a pressure
control. Controls shall be located near the condensing unit. Cabinet shall maintain
36°F to 40°F (2°C to 4°C) temperature in the refrigerator section, and 0°F to 5°F
(–18°C to –15°C) temperature in the freezer section with lids closed for storage.
Electrical connections shall be 115 volt, 60 cycle, single phase. Unit shall have a 9'
(2.7m) long electrical cord and NEMA 5-15P plug.
Unit shall be mounted on 6.00" (15.2cm) high adjustable stainless steel legs.
Optional Accessories and Modifications
• 4.00" (10.2cm) diameter swivel casters (all locking) with corner bumpers (adds
2.50" [6.4cm] to overall length and depth and reduces overall height by 1.00"
[2.5cm])
• Heavy-duty casters (contact factory)
• Corner bumpers (adds 2.50" [6.4cm] to overall length and depth)
• Wrap-around bumpers (adds 1.75" [4.4cm] to overall length and depth)
• Wire baskets (16.81" x 9.62" x 3.87" [42.7cm x 24.4cm x 9.8cm])
• Laminate panels
• Fiberglass panels
• Lid locking device
• *Special voltages (contact factory)
NOTE: This equipment is intended for storage and /or display of prepackaged or bottled products only.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
NSCF
Model NSCF-48
*Inclusion of this option will alter the electrical specifications of the unit.
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
48.00"
121.9cm
28.00"
71.1cm
D=DRAIN
14.00"
35.6cm
24.00"
61.0cm
9.50"
24.1cm
D
12.50"
31.8cm
6.00"
15.2cm
37.00"
94.0cm
PLAN VIEW
MODEL NSCF-48
ELEVATION VIEW
MODEL NSCF-48
END VIEW
MODEL NSCF-48
LID OPENING DETAIL
MODEL NSCF-48
NSCF
Free-Standing Self-Contained Milk & Ice Cream Dispenser
Mechanical Data–Standard Unit
MODEL REFRIG. REFRIG. FREEZER FREEZER SHIP
NUMBER CAPACITY H.P. AMPS BTU LOAD BTU CAPACITY BTU LOAD BTU CAPACITY WEIGHT
NSCF-48
126 half pint cartons
& 210 3oz. ice cream cups
1/4 6.0 140 1600 410 800 390 lbs/ 177 kg
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSNSCF 10/01
Loading...