Delfield MF-2020 General Manual
Short form specifications
The exterior sides, bottom and top edge shall be 20-gauge
galvanized steel. 14-gauge exterior bottom applies to self
contained models only.
Inner liner shall be water tight and constructed of 22-gauge
stainless steel with a 1.00” (2.54cm) I.P.S. drain. Opening(s)
shall have throat liners constructed of high impact plastic.
Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip.
Each opening shall have an insulated, stainless steel folding
lid with aluminum liner, molded rubber edge and black plastic
handles.
Each self-leveling mechanism shall be field adjustable by adding or removing stainless steel extension springs in the elevator housing inside the unit. The elevators shall be connected
by removable platform carriers constructed of 18-gauge
stainless steel.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
MF
Built-in remote milk or beverage dispensers
Model MF-31
Refrigeration system (to provided by others) shall use HFC134a refrigerant. An expansion valve and copper tubing connection to the remote refrigeration system shall be provided.
NOTE: Temperature and pressure controls are not provided
on remote models.
THE FOLLOWING APPLIES TO MODELS MF-2821, MF-31,
MF-44 AND MF-57 ONLY:
(6) anodized aluminum divider trays will be supplied per
opening. NOTE: See chart on back for milk storage capacity.
Optional Accessories & Modifications
• Lid locking device
• Wire baskets (not available on MF-2020)
• Lexan
• Special refrigerants (contact factory)
®
covers
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
29.25”
74.3cm
2.00”
(5.1cm)
2.00” (5.1cm)
26.25”
66.7cm
MF
Built-in remote milk or beverage dispensers
1.87”
4.8cm
2.62”
6.7cm
26.25”
66.7cm
2.75”
7.0cm
2.62”
6.7cm
1.87”
4.8cm
26.25”
66.7cm
PLAN VIEW
MODELS MF-2020
28.00”
71.1cm
ELEVATION VIEW
MODELS MF-2020
2.87”
7.0cm
41.50”
105.4cm
2.62”
6.7cm
66.7cm
1.87”
4.8cm
26.25”
RIGHT END VIEW
MODEL MF-2020
55.00”
139.7cm
2.87”
7.0cm
PLAN VIEW MODELS MF-44 PLAN VIEW MODELS MF-57
14.50”
36.8cm
PLAN VIEW
MODELS MF-2821
ELEVATION VIEW
MODELS MF-2821
1.87”
4.8cm
2.62”
6.7cm
26.25”
66.7cm
28.00”
71.1cm
PLAN VIEW
MODELS MF-31
ELEVATION VIEW
MODELS MF-31
12.50”
31.8cm
LID OPENING DETAIL
MODELS MF-2821,
MF-31, MF-44 & MF-57
13.90”
35.3cm
on MF2020
only
28.00”
71.cm
ELEVATION VIEW MODELS MFSC-44
28.00”
71.cm
ELEVATION VIEW MODELS MFSC-57
MODEL CUT OUT HORSE BTU EVAP. SHIP
28.25”
66.7cm
RIGHT END VIEW
MODELS MF-2821,
MF-31, MF-44 & MF-57
NUMBER DIMENSIONS(LxD) CAPACITY POWER† LOAD TEMP. WEIGHT
MF-2020 (1) 25.25” x 22.25” n/a 1/4† 300 30˚F 240lbs
(1) 64.1cm x 56.5cm -1˚C 109kg
MF-2821 (1) 10.75 x 21.00” 126 half pint 1/4† 260 30˚F 197lbs
(1) 27.3cm x 53.3cm cartons -1˚C 89kg
MF-31 (2) 10.75 x 21.00”* 252 half pint 1/4† 300 30˚F 238lbs
(2) 27.3cm x 53.3cm* cartons -1˚C 108kg
MF-44 (3) 10.75 x 21.00”* 378 half pint 1/4† 410 30˚F 312lbs
(3) 27.3cm x 53.3cm* cartons -1˚C 142kg
MF-57 (4) 10.75 x 21.00”* 504 half pint 1/4† 520 29˚F 335lbs
(4) 27.3cm x 53.3cm* cartons -2˚C 152kg
*requires 2.75 (7.0cm) between each cutout
†MF models require remote refrigeration systems; horsepower rating shown are recommended
LENGTH
CUTOUT ORIENTATION
(PLAN VIEW)
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSMF 08/02
DEPTH
Loading...