Delfield Meridian MRRT1-GS, Meridian MRRT2-GS, Meridian MRRT3-GS Specifications

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

MERIDIAN SERIES

®

Solid/Glass Door Roll-Through Refrigerators

MODELS:

 MRRT1-GS Single section  MRRT2-GS Two section  MRRT3-GS Three section
Solid full height door (one side) Solid full height door (one side) Solid full height door (one side)
Glass full height door (one side) Glass full height door (one side) Glass full height door (one side)

MERIDIAN SERIES

®

SOLID/GLASS DOOR ROLL-THROUGH REFRIGERATORS

MRRT2-GS

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.

Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.

Doors: Unit is provided with hinged glass front
door(s) on one side. Doors on refrigerated units are
constructed with double-pane tempered thermopane
glass. Glass doors are constructed with a combination
of extruded aluminum & PVC, and are provided with
magnetic gaskets. Doors will have self-closing hinges
and continuous handle along vertical dimension of
door(s). Glass door constructed to eliminate need
for heater wires. Solid doors shall have a 22-gauge
stainless steel exterior & anodized aluminum interior
liner. Doors shall be fully insulated with high density
foamed in place polyurethane. Each door shall have

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with minimal
energy cost

• Exterior digital thermometer with high/low temperature
alarm

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Aluminum interior stands up to food acids without corroding

• Lots of interior storage space for the money

two self-closing, cam-lift style hinges. Doors shall be easily
removable without use of tools. Door gaskets shall be
magnetic snap-in style to allow simple replacement. Door
handles shall be recessed.

• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable
shroud facing.

Refrigerators: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used.
System has the capability of maintaining between 27˚F and
40˚F in heavy use food service operations. Refrigerant is
metered using a highly responsive thermostatic expansion
valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which
provides improved pull down times, reducing compressor
cycling and longer compressor life with lower energy
consumption.

Control system uses adaptive defrost to assure evaporator

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Digital thermometer
 TXV
 220/50/1 electrical
 Electronic control

coil is free of ice and operating at optimum efficiency.
Evaporator condensate is eliminated using an energy
efficient hot gas system.

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with a ten foot
(3m) long electrical cord & plug as shown on reference
chart. Cord & plug shall be wired to the junction box on
top of the unit.

Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.

Notes: Bottom to be reinforced with 14-gauge
channels. All units to be supplied with easily attachable
16-gauge stainless steel ramps, one per door opening.
Wiper gasket shall be provided on bottom of door for
seal to ramp.

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Approval _________________

Date ____________________

Meridian Series® Solid/Glass Door Roll-Through Refrigerators

Model #__________
CSI Section 11400

36.25”

93.4cm

PLAN VIEW MRRT1-GS

89”

226.1cm

34”

86.6cm

70.75”

179.1cm

28.2”

71.6cm

36.25”

93.4cm

66”

167.6cm

PLAN VIEW MRRT2-GS

ELEVATION VIEW MRRT2-GSELEVATION VIEW MRRT1-GS

36.25

93.4cm

98”

248.9cm

PLAN VIEW MRRT3-GS

ELEVATION VIEW MRRT3-GS

89”

226.1cm

12.14”

30.8cm

186.1cm

73.28”

36.25”

92.1cm

Ramp dimensions

see below

43.58”

110.7cm

END/SECTION VIEW

ALL MODELS

DOOR CLEARANCE DETAIL

ALL MODELS

32.25”

81.9cm

29.75”

75.56cm

MECHANICAL DETAIL

5.92”

15.04cm

RAMP DIMENSIONS

(Not to scale)

1.06”

2.69cm

29.12”

73.96cm

Ramp Width

3.80”

9.65cm

PERSPECTIVE VIEW

ALL MODELS

MECHANICAL DATA

CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P. SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRRT1-GS 115 7.0 38.58 NA NA 1 1/2 2488 469 5-15P
MRRT2-GS 115/208-230 10.1 79.74 NA NA 2 3/4 6920 686 —
MRRT3-GS 115/208-230 11.3 120.90 NA NA 3 3/4 7569 1081 —

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Printed in the USA.
03/07
DSMRTGS