Delfield Meridian MRRT1-S, Meridian MRRT2-S, Meridian MRRT1R-S, Meridian MRRT2R-S, Meridian MRRT3-S Specifications

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

MERIDIAN SERIES

®

Solid Door Roll-Through Refrigerator

MODELS:

 MRRT1-S Single section  MRRT2-S Two section  MRRT3-S Three section
Solid full height door Solid full height doors Solid full height doors

 MRRT1R-S Remote  MRRT2R-S Remote  MRRT3R-S Remote

MERIDIAN SERIES

STANDARD FEATURES

• Shroud removes without tools, for easy condenser

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to find, don’t intrude into

• Attractive aluminum side panels are easy to clean and

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more

• Mini watt door heaters eliminate condensation with minimal

• Exterior digital thermometer with high/low temperature

MRRT2-S

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.

Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.

Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing,
cam-lift style hinges. Doors shall be easily removable
without use of tools. Door gaskets shall be magnetic
snap-in style to allow simple replacement. Door handles
shall be recessed.

• Tri seal door gaskets lower energy costs with a unique

• Aluminum interior stands up to food acids without corroding

• Lots of interior storage space for the money

maintenance

looks

kitchen traffic

corrosion resistant

space for product storage

energy cost

alarm

insulating design

• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable
shroud facing.

Refrigeration: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and
longer compressor life with lower energy consumption.

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Digital thermometer
 TXV
 220/50/1 electrical
 Electronic control

Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase. Self contained
models have a ten foot (3m) long electrical cord & plug
as shown on reference chart. Cord & plug shall be wired
to the junction box on top of the unit.

Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.

Notes: Bottom to be reinforced with 14-gauge channels.
All units to be supplied with easily attachable 16-gauge
stainless steel ramps, one per door opening. Wiper gasket
shall be provided on bottom of door for seal to ramp.

®

SOLID DOOR ROLL-THROUGH REFRIGERATOR

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Approval _________________

Date ____________________

Meridian Series® Solid Door Roll-Through Refrigerators

34”

86.4cm

36.25”

93.4cm

36.25”

93.4cm

PLAN VIEW MRRT1-S PLAN VIEW MRRT2-S PLAN VIEW MRRT3-S

66”

167.7cm

36.25

93.4cm

98”

248.9cm

89”

226.1cm

Model #__________
CSI Section 11400

12.14”

30.9cm

36.25”

92.1cm

70.75”

89”

226.1cm

179.1cm

28.20”

73.28cm

DOOR CLEARANCE DETAIL

ALL MODELS

32.25”

81.9cm

73.28”

186.1cm

Ramp dimensions

see below

43.58”

110.7cm

END/SECTION VIEW

ALL MODELS

ELEVATION VIEW MRRT3-SELEVATION VIEW MRRT2-SELEVATION VIEW MRRT1-S

PERSPECTIVE VIEW

ALL MODELS

29.75”

75.6cm

MECHANICAL DETAIL

1.06”

2.69cm

5.92”

15.04cm

RAMP DIMENSIONS

(Not to scale)

29.12”
74cm

Ramp Width

3.80”

9.7cm

MECHANICAL DATA

CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P. SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRRT1-S 115 7.0 38.58 NA NA 1 1/2 2488 454 5-15P
MRRT2-S 115/208-230 10.1 79.74 NA NA 2 3/4 6920 656 —
MRRT3-S 115/208-230 11.3 120.90 NA NA 3 3/4 7569 1036 —

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.

REMOTE CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P.* SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRRT1R-S 115 3.7 38.58 NA NA 1 1/2 — 454 —
MRRT2R-S 115 5.2 79.74 NA NA 2 3/4 — 656 —
MRRT3R-S 115 6.7 120.90 NA NA 3 3/4 — 1036 —

*Recommended

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Printed in the USA.
03/07
DSMRT