Delfield Meridian MRRT1-G, Meridian MRRT1R-G, Meridian MRRT2-G, Meridian MRRT2R-G, Meridian MRRT3-G Specifications

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

MERIDIAN SERIES

®

Glass Door Roll-Through Refrigerators

MODELS:

 MRRT1-G Single section  MRRT2-G Two section  MRRT3-G Three section
Glass full height door Glass full height doors Glass full height doors

 MRRT1R-G Remote  MRRT2R-G Remote  MRRT3R-G Remote

MERIDIAN SERIES

STANDARD FEATURES

• Shroud removes without tools, for easy condenser

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to find, don’t intrude into

• Attractive aluminum side panels are easy to clean and

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more

• Mini watt door heaters eliminate condensation with minimal

• Exterior digital thermometer with high/low temperature

MRRT2-G

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.

Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.

Doors: Unit is provided with hinged glass front door(s).
Doors on refrigerated units are constructed with double­pane tempered thermopane glass. Glass doors are
constructed with a combination of extruded aluminum
& PVC, and are provided with magnetic gaskets. Doors
will have self-closing hinges and continuous handle
along vertical dimension of door(s). Glass door
constructed to eliminate need for heater wires.

• Tri seal door gaskets lower energy costs with a unique

• Aluminum interior stands up to food acids without corroding

• Lots of interior storage space for the money

maintenance

looks

kitchen traffic

corrosion resistant

space for product storage

energy cost

alarm

insulating design

• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable
shroud facing.

Refrigerators: All components are mounted to the
exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and
longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator
coil is free of ice and operating at optimum efficiency.

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Digital thermometer
 TXV
 220/50/1 electrical
 Electronic control

Evaporator condensate is eliminated using an energy
efficient hot gas system.

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase. Self contained
models have a ten foot (3m) long electrical cord & plug
as shown on reference chart. Cord & plug shall be wired
to the junction box on top of the unit.

Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top

®

GLASS DOOR ROLL-THROUGH REFRIGERATORS

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Approval _________________

Date ____________________

Meridian Series® Glass Door Roll-Through Refrigerators

Model #__________
CSI Section 11400

36.25”

93.4cm

PLAN VIEW MRRT1-G

89”

226.1cm

34”

86.6cm

70.75”

179.1cm

28.20”

71.6cm

36.25”

93.4cm

66”

167.6cm

PLAN VIEW MRRT2-G

ELEVATION VIEW MRRT2-GELEVATION VIEW MRRT1-G

36.25

93.4cm

98”

248.9cm

PLAN VIEW MRRT3-G

ELEVATION VIEW MRRT3-G

89”

226.1cm

12.14”

30.8cm

186.1cm

73.28”

END/SECTION VIEW

36.25”

92.1cm

Ramp dimensions

see below

43.58”

110.7cm

ALL MODELS

DOOR CLEARANCE DETAIL

ALL MODELS

32.25”

81.9cm

29.75”

75.56cm

MECHANICAL DETAIL

5.92”

15.04cm

RAMP DIMENSIONS

(Not to scale)

1.06”

2.69cm

PERSPECTIVE

VIEW

ALL MODELS

29.12”

73.96cm

Ramp Width

3.80”

9.65cm

MECHANICAL DATA

CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P. SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRRT1-G 115 7.0 38.58 NA NA 1 1/2 2488 464 5-15P
MRRT2-G 115/208-230 10.1 79.74 NA NA 2 3/4 6920 676 NA
MRRT3-G 115/208-230 11.3 120.90 NA NA 3 3/4 7569 1066 NA

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.

REMOTE CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P.* SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRRT1R-G 115 3.5 38.58 NA NA 1 1/2 — 464 —
MRRT2R-G 115 5.5 79.74 NA NA 2 3/4 — 676 —
MRRT3R-G 115 7.1 120.90 NA NA 3 3/4 — 1066 —

****Recommended

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Printed in the USA.
03/07
DSMRTG