Delfield Meridian MRR1S-S, Meridian MRR1S-SH, MRR1SR-S, MRR1SR-SH, Meridian MRR2S-S Specifications

MERIDIAN SERIES

®

Solid Door Shallow Reach-In Refrigerators

MODELS:

 MRR1S-S Single section  MRR2S-S Two section
Full height door Full height doors

 MRR1SR-S Remote  MRR2SR-S Remote

 MRR1S-SH Single section  MRR2S-SH Two section

Half height door Half height doors

 MRR1SR-SH Remote  MRR2SR-SH Remote

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude into
kitchen trafc

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with
minimal energy cost

• Easy to read dial thermometer

MRR1S-S

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Epoxy coated shelves—corrosion resistant, 300-lb.
capacity. Flexible placement on 1” centers allows
maximum storage

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

• Aluminum interior stands up to food acids without
corroding

• Lots of interior storage space for the money

• Rugged metal legs, adjustable to compensate for
uneven oors

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters

MERIDIAN SERIES

®

SOLID DOOR SHALLOW REACH-IN REFRIGERATORS

SPECIFICATIONS

Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be made of aluminum.
Facing of shroud shall be easily removable without the
use of tools.
Cabinet interior shall be anodized aluminum. Bottom &
top of liner shall be die-stamped to provide radius corners
and a recessed bottom. Base shall be fully insulated with
high-density foamed in place polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments. Unit
will be mounted on 6” (15.24 cm) metal legs.

Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing, cam­lift style hinges. Doors shall be easily removable without

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

use of tools. Door gaskets shall be magnetic snap-in
style to allow simple replacement. Door handles shall be
recessed.

• Please specify right or left hand hinging at time of
order.

Mechanical controls shall be located behind a removable
shroud facing.

Refrigeration: Refrigeration system shall use R404A
refrigerant. System shall be completely outside food zone
to maximize internal storage space. System shall utilize
a dual diversion high ow air distribution system, and
shall be a high capacity design. Evaporator coils shall be
coated to prevent corrosion. Cabinet shall maintain 340F
to 400F (10C to 40C) internal temperature.

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.

Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase,
and must be hard-wired to the junction box located on
top of the unit.

Approval _________________

Date____________________

Meridian Series® Solid Door Shallow Reach-In Refrigerators

J-BOX LOCATED
75" AFF FOR ST'D BOXES
83" AFF FOR RI/RT'S

8" (1) door units
11" (2&3) door units

6" (1) door units
23" (2) door units
39" (3) door units

Front of unit

26”

66.0cm

29”

73.7cm

26”

66.0cm

56”

142.2cm

12.14”

30.8cm

Model #__________
CSI Section 11400

26.0”

73.7cm

PLAN VIEW MRR1S-S

81”

205.6cm

ELEVATION VIEW MRR1S-S

DOOR CLEARANCE DETAIL

25”

63.5cm

58”

147.3cm

27.25”

69.2cm

PLAN VIEW MRR2S-S

52”

132cm

ELEVATION VIEW MRR2S-S

3.80”

9.65cm

26.48”

67.25cm

6.00

15.2cm

56.76”

144.2cm

16.02”

40.7cm

19.75”

50.2cm

\

23.75”

60.3cm

END SECTION VIEW

ALL MODELS

MECHANICAL DATA

SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. LOAD SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRR1S-S 115 8.5 18.25 8.98 3 1/4 674 2015 358 5-15P
MRR1S-SH 115 8.5 18.25 8.98 3 1/4 674 2015 358 5-15P
MRR2S-S 115 10.8 37.96 19.04 6 1/3 1263 2522 562 5-15P
MRR2S-SH 115 10.8 37.96 19.04 6 1/3 1263 2522 562 5-15P

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.

REMOTE SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P.* LOAD SYSTEM CAP WEIGHT PLUG

REFRIGERATORS
MRR1SR-S 115 3.0 18.25 8.98 3 1/4 674 — 358 —
MRR1SR-SH 115 3.2 18.25 8.98 3 1/4 674 — 358 —
MRR2SR-S 115 4.0 37.96 19.04 6 1/3 1263 — 562 —
MRR2SR-SH 115 4.2 37.96 19.04 6 1/3 1263 — 562 —

*Recommended

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

MECHANICAL DETAIL

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

PERSPECTIVE VIEW

ALL MODELS

Printed in the USA.
08/03
DSMRS_R