Delfield Meridian MHPT1-G, Meridian MHPT1-S, Meridian MHPT1-GS, Meridian MHPT2-G, Meridian MHPT2-GS Specifications

MERIDIAN SERIES

®

Heated Pass-Throughs

MODELS:

 MHPT1-S Single section  MHPT2-S Two section
Solid full height door Solid full height doors

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

 MHPT1-GS Single section  MHPT2-GS Two section
Half glass/half solid door Half glass/half solid doors

 MHPT1-G Single section  MHPT2-G Two section
Full height glass door Full height glass doors

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude into
kitchen trafc

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with
minimal energy cost

• Easy to read dial thermometer

MHPT2-GHSH

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Chrome shelves

• Aluminum interior stands up to food acids without
corroding

• Lots of interior storage space for the money

• Rugged metal legs, adjustable to compensate for
uneven oors

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters

MERIDIAN SERIES

®

HEATED PASS-THROUGHS

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments.
Units are mounted on 6” (15.24 cm) legs.

Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing,
cam-lift style hinges. Doors shall be easily removable

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

without use of tools. Door gaskets shall be magnetic snap-in
style to allow simple replacement. Door handles shall be
recessed.

Glass doors are constructed with a combination of extruded
aluminum & PVC, and are provided with magnetic gaskets.
Doors will have self-closing hinges and continuous handle
along vertical dimension of door(s).

• Please specify right or left hand hinging at time of order.

Mechanical controls shall be located behind a removable
shroud facing.

Dual Voltage Models Only: Electrical connections shall
be 115/208-240 volt, 60 hertz, single phase, and must be
hard-wired to the junction box located on top of the unit.

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Heating Assembly: Cabinets to be designed to
maintain temperature up to 200ºF. Helical shaped,
tubular n heating element. High speed blower to
provide uniform airow in cabinet. Removable/
replaceable heating system. No exposed elements inside
cabinet. Fan and heating elements service accessible
without tools. Temperature to be controlled by an
adjustable electronic thermostat equipped with an analog
display. On/off switch in front.

Approval _________________

Date____________________

Meridian Series® Heated Pass-Throughs

J-BOX LOCATED
75" AFF FOR ST'D BOXES
83" AFF FOR RI/RT'S

8" (1) door units
11" (2&3) door units

6" (1) door units
23" (2) door units
39" (3) door units

Front of unit

56”

142.3cm

36.25”

92.1cm

29”

73.7cm

36.25”

92.1cm

12.14”

30.8cm

Model #__________
CSI Section 11400

36.25”

92.1cm

PLAN VIEW MHPT1-G

81”

205.7 cm

25”

63.5cm

58”

147.3cm

PLAN VIEW MHPT2-G

52”

132.1cm

ELEVATION VIEW MHPT2-GELEVATION VIEW MHPT1-G

26.48”

67.3cm

81”

205.7cm

144.2cm

6.00”

15.2cm

56.76”

END SECTION VIEW

ALL MODELS

27.25”

69.21
cm

DOOR CLEARANCE DETAIL

ALL MODELS

MECHANICAL DATA

SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. LOAD SYSTEM CAP WEIGHT PLUG

STAINLESS
MHPT1-S 120/208-240 9.0 26.64 12.81 3 NA NA NA 370 NA
MHPT2-S 120/208-240 16.0 55.42 27.54 6 NA NA NA 592 NA
GLASS/STAINLESS
MHPT1-GS 120/208-240 9.0 26.64 12.81 3 NA NA NA 380 NA
MHPT2-GS 120/208-240 16.0 55.42 27.54 6 NA NA NA 612 NA
GLASS
MHPT1-G 120/208-240 9.0 26.64 12.81 3 NA NA NA 390 NA
MHPT2-G 120/208-240 16.0 55.42 27.54 6 NA NA NA 622 NA

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

MECHANICAL DETAIL

3.80”

9.7cm

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

PERSPECTIVE VIEW

ALL MODELS

Printed in the USA.
08/03
DSMPTH