Delfield Meridian MFRI1R-G, Meridian MFRI2R-G, Meridian MFRI3R-G Specifications

Project __________________________

Item ____________________________

Quantity _________________________

MERIDIAN SERIES

®

CSI Section 11400

Glass Door Roll-In Freezers

MODELS:

 MFRI1R-G Remote single section  MFRI2R-G Remote two section  MFRI3R-G Remote three section
Glass full height door Glass full height doors Glass full height doors

MERIDIAN SERIES

MFRI2R-G

SPECIFICATIONS
Exterior: Cabinet front, and shroud shall be 22-

gauge stainless steel. Exterior sides shall be aluminum.
Facing of shroud shall be easily removable without the
use of tools.

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with minimal
energy cost

• Exterior digital thermometer with high/low temperature
alarm

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Aluminum interior stands up to food acids without corroding

• Lots of interior storage space for the money

and continuous handle along vertical dimension of door(s).
Glass door constructed to eliminate need for heater wires.

• Please specify right or left hand hinging at time of order

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 220/50/1 electrical
 Electronic control

Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.

®

GLASS DOOR ROLL-IN FREEZERS

Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide radius
corners and a recessed bottom. Cabinet shall be
fully insulated with high-density foamed in place
polyurethane.

Doors: Unit is provided with hinged glass front
door(s). Doors on freezer units are constructed with
double-pane low E, Argon filled tempered thermopane
glass. Glass doors are constructed with a combination
of extruded aluminum & PVC, and are provided with
magnetic gaskets. Doors will have self-closing hinges

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Mechanical controls shall be located behind a removable
shroud facing.

Freezers: All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between -5 ˚F and 0˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
System is controlled using Delfield’s ACT-Advanced Control
Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and
longer compressor life with lower energy consumption.

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase.

Notes: Bottom to be reinforced with 14-gauge channels.
All units to be supplied with easily attachable 16-gauge
stainless steel ramps, one per door opening. Wiper gasket
shall be provided on bottom of door for seal to ramp.

Approval _________________

Date ____________________

Meridian Series® Glass Door Roll-In Freezers

34”

86.4cm

34”

86.4cm

34”

86.4cm

PLAN VIEW MFRI1R-G PLAN VIEW MFRI2R-G PLAN VIEW MFRI3R-G

70.75”

89”

226.1cm

179.1cm

28.20”

71.6cm

66”

167.6cm

34”

86.4cm

ELEVATION VIEW MFRI3R-GELEVATION VIEW MFRI2R-GELEVATION VIEW MFRI1R-G

98”

248.9cm

Model #__________
CSI Section 11400

12.14”

30.8cm

89”

226.1cm

73.28”

186.1cm

34”

86.4cm

Ramp dimensions

see below

37.68”

95.7cm

END/SECTION VIEW

ALL VIEWS

DOOR CLEARANCE DETAIL

ALL VIEWS

32.25”

81.92cm

29.75”

75.6cm

MECHANICAL DETAIL

29.12”
74cm

Ramp Width

3.80”

9.7cm

PERSPECTIVE VIEW

ALL VIEWS

5.92”

15.04cm

1.06”

2.69cm

RAMP DIMENSIONS

(Not to scale)

MECHANICAL DATA

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.

REMOTE CU. FT. SHELVES # of RACK UNIT BTU/HR SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES CAP. H.P.* SYSTEM CAP WEIGHT PLUG

FREEZERS
MFRI1R-G 115 7.0 36.15 NA NA 1 1/2* — 487 5-15P
MFRI2R-G 115 10.2 74.72 NA NA 2 1* — 736 —
MFRI3R-G 115 13.5 113.28 NA NA 3 1½* — 1050 —

*Recommended.

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: [phone]
Fax: [phone]
Email: info@delfield.com

Printed in the USA.
03/07
DSMRLG_F