Delfield Meridian MFPT2-S, Meridian MFPT2-SH, Meridian MFPT2R-S, Meridian MFPT2R-SH Specifications

MERIDIAN SERIES

®

Project __________________________

Item____________________________

Quantity _________________________

CSI Section 11400

Solid Door Pass Through Freezers

MODELS:

 MFPT2-S Two section
Full height doors

 MFPT2R-S Remote

 MFPT2-SH Two section

Half height doors

 MFPT2R-SH Remote

STANDARD FEATURES

• Shroud removes without tools, for easy condenser
maintenance

• Built in door locks

• Durable stainless steel doors and shroud, for lasting good
looks

• New high-density foam insulation cuts energy costs

• Big, easy grip handles are easy to nd, don’t intrude into
kitchen trafc

• Attractive aluminum side panels are easy to clean and
corrosion resistant

• Heavy-duty hinges with stay open feature

• Refrigeration system is located outside the food zone, more
space for product storage

• Mini watt door heaters eliminate condensation with
minimal energy cost

• Easy to read dial thermometer

MFPT2

• Tri seal door gaskets lower energy costs with a unique
insulating design

• Epoxy coated shelves—corrosion resistant, 300-lb.
capacity. Flexible placement on 1” centers allows
maximum storage

• Aluminum interior stands up to food acids without
corroding

• Lots of interior storage space for the money

• Rugged metal legs, adjustable to compensate for
uneven oors

OPTIONS AND ACCESSORIES

 Stainless steel exterior sides
 Stainless steel interior
 Stainless steel kick plate
 Door and end laminate
 Stainless steel exterior back
 Digital thermometer
 TXV
 Chrome Shelves
 Tray Slides
 220/50/1 electrical
 Electronic control
 Stainless steel legs
 Casters

MERIDIAN SERIES

®

SOLID DOOR PASS-THROUGH FREEZERS

SPECIFICATIONS
Exterior: Cabinet front and shroud shall be 22-gauge

stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments.
Units are mounted on 6” (15.24 cm) metal legs.

Doors: Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing,

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

cam-lift style hinges. Doors shall be easily removable
without use of tools. Door gaskets shall be magnetic
snap-in style to allow simple replacement. Door handles
shall be recessed.

• Please specify right or left hand hinging at time of
order.

Mechanical controls shall be located behind a removable
shroud facing.

Freezers: Refrigeration system shall use R404A
refrigerant. System shall be completely outside food
zone to maximize internal storage space. System shall
utilize a dual diversion high ow air distribution system,
and shall be a high capacity design. Evaporator coils
shall have deep-corrugated, staged n construction for
maximum efciency with fewer defrost cycles. Cabinet
shall maintain 00F internal temperature.

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Single Voltage Models Only: Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.

Dual Voltage Models Only: Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.

Approval _________________

Date____________________

Meridian Series® Solid Door Pass-Through Freezers

J-BOX LOCATED
75" AFF FOR ST'D BOXES
83" AFF FOR RI/RT'S

8" (1) door units
11" (2&3) door units

6" (1) door units
23" (2) door units
39" (3) door units

Front of unit

Model #__________
CSI Section 11400

36.25”

92.1cm

56”

142.2cm

PLAN VIEW MRPT2-S

52”

132.1cm

ELEVATION VIEW MRPT2-S

81”

205.7cm

12.14”

30.8cm

144.2cm

56.76”

6.00”

15.2cm

36.25”

92.1cm

END SECTION VIEW

MRPT2-S

27.25”

69.2cm

DOOR CLEARANCE DETAIL

MRPT2-S

26.48”

67.3cm

3.80”

9.7cm

PERSPECTIVE VIEW

MECHANICAL DETAIL

MRPT2-S

MECHANICAL DATA

SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P. LOAD SYSTEM CAP WEIGHT PLUG

FREEZERS
MFPT2-S 115/208-230 7.0 55.42 27.54 6 1 3013 3497 660 —
MFPT2-SH 115/208-230 7.0 55.42 27.54 6 1 3013 3497 660 —

Remote units supplied with: Evaporator coil, solenoid valve, expansion valve and temperature control. Condensing units to be sized and supplied with others.

REMOTE SHELVES NO UNIT BTU/HR CAB BTU/HR SHIP NEMA
MODEL # VOLTAGE AMPS STORAGE SQ. FT. SHELVES H.P.* LOAD SYSTEM CAP WEIGHT PLUG

FREEZERS
MFPT2R-S 115/208-230 9.8 55.42 27.54 6 1 — 3497 660 —
MFPT2R-SH 115/208-230 10.2 55.42 27.54 6 1 — 3497 660 —

*Recommended

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.deleld.com

Phone: [phone]
Fax: [phone]
Email: info@deleld.com

Printed in the USA.
08/03
DSMPT_F