Short Form Specifications
Exterior Body is seamless, one-piece molded fiberglass, having perfectly smooth
exterior surface with all corners fully rounded. The fiberglass reinforced polyester
(F.R.P.) is molded with permanent color. Stress points are internally reinforced.
Exterior top is constructed of 14-gauge stainless steel, welded, ground and
polished into one integral unit. Top is fabricated with square exterior corners.
Top has one (KCM-36), two (KCM-50), three (KCM-60) or four (KCM-74)
die-stamped openings and is provided with hinged removable lids. Lids are
constructed of stainless steel and have a rubber gasket seal.
Refrigerated Compartment; have water-tight inner liner constructed of
22-gauge stainless steel, with radius corners and 1.5” (3.8cm) of polyurethane insulation. Compartment is equipped with a drain plumbed to a
drain valve located in the bottom of the unit. Refrigerated compartment
is equipped with automatic self leveling, field adjustable elevators. Divider
trays are supplied.
Refrigeration; copper refrigeration coils are attached to outside of inner liner.
Unit is refrigerated by self-contained, 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with thermostatic control. Unit is wired with a
3-wire, grounded, maximum 10’ (3m) 120 volt cord and plug. Refrigeration
system use HFC-134A refrigerant
Casters; unit is mounted on 5” (12.7cm) diameter swivel casters with nonmarking polyolefin tires and plate brakes. Overall height of caster assembly
is 6” (15.2cm).
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
KCM
Mobile Milk Counters
Model KCM-50
shown with option C
Optional Accessories and Modifications
A) 12” (30.5cm) wide stainless steel fold-down tray slide
C) 10” (25.4cm) wide three-bar fold-down tray slide
E) 10" (25.4cm) wide stainless steel fold-down work shelf
F) Line-up interlock device
R) 10” x 17” x 4” (25.4cm x 43.2cm x 10.2cm) deep chrome wire baskets
S) Stainless steel lid locking device with “T” handle
U) 14” x 30” (35.6cm x 76.2cm) stainless steel end drop shelf
UU) Molded fiberglass trim strips
V) 6” (15.2cm) high adjustable stainless steel legs in lieu of casters
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
KCM
30"
76.2cm
30"
76.2cm
30"
76.2cm
50"
127cm
60"
152.4cm
36"
91.4cm
C
L
C
L
C
L
C
L
C
L
C
L
DRAIN CENTERED
UNDER COMPARTMENT
DRAIN CENTERED
UNDER COMPARTMENT
DRAIN CENTERED
UNDER COMPARTMENT
30"
76.2cm
74"
188cm
C
L
DRAINS CENTERED
UNDER EACH
COMPARTMENT
C
L
ON/OFF SWITCH ON LEFT END
1.12"
2.9 cm
DRAIN VALVE
1.12"
2.9 cm
DRAIN VALVE
CORD AND PLUG
(120V-60C-1PH)
CORD AND PLUG
(120V-60C-1PH)
ON/OFF SWITCH ON LEFT END
1.62"
4.1 cm
36.00"
91.4 cm
6.00"
15.2 cm
13.00"
33.0 cm
1.62"
4.1 cm
DRAIN
LINE
PLAN VIEW
KCM-50
PLAN VIEW
KCM-36
PLAN VIEW
KCM-60
PLAN VIEW
KCM-74
ELEVATION VIEW
KCM-74
ELEVATION VIEW
KCM-50
ON/OFF SWITCH
ON LEFT END
1.12"
2.9 cm
DRAIN
VALVE
CORD AND PLUG
(120V-60C-1PH)
ELEVATION VIEW
KCM-36
END VIEW
ALL MODELS
ON/OFF SWITCH ON LEFT END
1.12"
2.9 cm
DRAIN VALVE
CORD AND PLUG
(120V-60C-1PH)
ELEVATION VIEW
KCM-60
Mobile Milk Counters
Mechanical Data–Standard Unit
MODEL MILK VOLTS/HERTZ/ NEMA SHIP
NUMBER CAPACITY* H.P. PHASE AMPS PLUG WEIGHT
KCM-36
KCM-50
KCM-60
KCM-74
*Based on 0.5 pint (237mil), 2.75” x 2.75” (7cm x 7cm) gable top cartons.
126 1/4 120/60/1 5.0 5-15P 400 lbs/181 kg
252 1/4 120/60/1 5.0 5-15P 450 lbs/204 kg
378 1/4 120/60/1 5.0 5-15P 500 lbs/227 kg
504 1/3 120/60/1 6.0 5-15P 550 lbs/250 kg
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
GSKCM 02/02