Delfield F17C52 User Manual

F17C

Self-Contained Refrigerated Base Equipment Stands

Models

• F17C52 - 52” length refrigerated base chef stand with (2) 32” drawers

• F17C60 - 60” length refrigerated base chef stand with(2) 19 & (2) 27” drawers

• F17C68 - 68” length refrigerated base chef stand with(4) 27” drawers

• F17C78 - 78” length refrigerated base chef stand with(4) 32” drawers

• F17C87 - 98” length refrigerated base chef stand with(2) 19 & (4) 27” drawers

• F17C95 - 95” length refrigerated base chef stand with(6) 27” drawers

• F17C110 - 110” length refrigerated base chef stand with(6) 32” drawers

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

F17C: Self-Contained Refrigerated Base Equipment Stands

F17C68

Specifications

Stainless steel top is constructed with integral front marine

edge nosing and rear backsplash. Stainless steel bars run

front to back on both sides for support and spline purposes.

Stainless steel interior sub-top is made integral with the top by

injecting 2.00” of high density environmentally friendly, Kyoto

Protocol Compliant, Non ODP (Ozone Depletion Potential),

Non GWP (Global Warming Potential) polyurethane foam

between the tops. Cutting board brackets are attached to each

side and house a 1.25” thick x 9.5” deep maple cutting board.

Refrigerated base exterior sides, interior back and bottom

are constructed of stainless steel. Exterior bottom and back

are made of galvanized steel. Both left and right interior sides

are formed of ABS plastic. The base is injected with 2.00” of

high density polyurethane foam between the exterior and

interior. Refrigerated base fronts are made of .095” thick ABS

thermoformed plastic and backed up by ridged polyurethane

water blown injection molded frames. Exterior machine

compartment side is constructed of galvanized steel.

Single units are supplied with wall-mounted bracket and

threaded rod to allow installation of the unit against a solid

surface.

Standard Features

• Top is 18-gauge stainless steel, with integral front marine edge

• Cutting board brackets with 1.25” thick x 9” deep maple cutting board

• High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit

• Snap in dart style vinyl magnetic gasket

• Drawer handles are recessed black plastic and

held in with a positive lock system

• 6.12” adjustable full stainless steel legs

• 8’ cord and plug supplied

• Interior refrigerated base cabinet section to

maintain 36º to 41º

• Digital thermometer

• Drawer system is sized to hold 12” x 20” x 4”

deep hotel pans (by others). The drawer system is all stainless steel construction for maximum durability

• Environmentally friendly HFC-404A refrigerant

• One year parts and 90 day labor standard

warranty

Drawer system is sized to hold 12 x 20 x 4 “ deep hotel pans

and smaller fractional pans. Drawer system is all stainless steel

construction. Tracks are designed with a stay shut feature that

holds the drawer gasket tight to the base front on uneven

floors. Exterior drawer fronts are made of stainless steel; and

an interior made of ABS plastic with formed in channels to

house the snap-in dart style santoprene gasket. Each drawer

front is injected with 1.87” of high density polyurethane foam

between the exterior and interior. Handles are recessed black

plastic and held in with a positive lock system.

Legs: Unit is mounted on 6.12” adjustable stainless steel legs.

Refrigeration system components are HFC-404A. Interior

cabinet is cooled with mullion style blower coils (coated)

mounted between each door/drawer section for even air and

temperature control. Models have a pre-wired condensing

unit and a digital thermometer installed in the machine

compartments (standard on right) louver panel. Refrigerated

base cabinet will maintain 36° to 40°F degree temperatures at

100°F ambient room temperature.

Electrical connections are 115V-60H-1PH. Units are supplied

with an 8’ cord and plug.

Options & Accessories

• Stainless steel back

• Stainless steel end

• Laminate facing (drawers only)

• Laminate back

• Laminate end

• Casters

• Doors, except 32"

• Locks

• 220V/50 cycle electrical*

* Inclusion of this option will alter electrical

specifications

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619

www.delfield.com

Plan View

All Models

30.74”

[78cm]

9.50"

[24cm]

14.00"

[36cm]

C = Condensing Unit

J = Junction Box W/8ft (2.4m) Cord And Plug

Mechanical Access

52.00" [132cm]

50.00" [127cm]

32.00" (81cm)

6.00"

[15cm]

Elevation View

F17C52

78.00" [198cm]

76.00" [193cm]

32.00" (81cm)

Elevation View

F17C78

32.00" (81cm)

14.00"

[36cm]

32.00" (81cm)

110.00" [279cm]

108.00" [274cm]

32.00" (81cm)

14.00"

[36cm]

32.00" (81cm)

60.00" [152cm]

58.00" [147cm]

19.00" (48cm)

Elevation View

F17C60

27.00" (69cm)

87.00" [221cm]

85.00" [216cm]

19.00" (48cm)

Elevation View

F17C87

14.00"

[36cm]

14.00"

[36cm]

27.00" (69cm)

14.00"

[36cm]

Elevation View

F17C110

Specifications

Model # Of Drawers

Self-Contained Refrigerated Base Equipment Stands

12”x20” Pan

Capacity

H.P. V/Hz/Ph Amps

F17C52 (2) 32” 4 1/5 115/60/1 8.0 452 1727

F17C60 (2) 19 & (2) 27” 6 1/5 115/60/1 8.0 556 1727

F17C68 (4) 27” 8 1/5 115/60/1 8.0 632 1727

F17C78 (4) 32” 8 1/4 115/60/1 10.0 726 2341

F17C87 (2) 19 & (4) 27” 10 1/4 115/60/1 10.0 868 2341

F17C95 (6) 27” 12 1/4 115/60/1 10.0 1001 2341

F17C110 (6) 32” 12 1/3 115/60/1 12.0 1143 2630

F17C

Deleld reserves the right to make changes to the design or specications without prior notice.

BTU Design

Load

68.00" [173cm]

66.00" [168cm]

27.00" (69cm)

Elevation View

F17C68

27.00" (69cm)

19" & 32” drawers extend 26.08” (66cm) 27” drawers extend 28.18” (72cm)

BTU System

Capacity

14.00"

[36cm]

95.00" [241cm]

93.00" [236cm]

27.00" (69cm)

Elevation View

F17C95

36.00"

(91cm)

7.62"

6.12"

(19cm)

(16cm)

Nema

Plug

5-15P

14.00"

[36cm]

End View

All Models

Ship Weight

410lbs/186kg

460lbs/208kg

500lbs/227kg

580lbs/263kg

625lbs/283kg

700lbs/317kg

750lbs/340kg

980 S. Isabella Rd. Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981 Fax: 800-669-0619 www.delfield.com

Printed in the U.S.A. DSF17C 05/12