Delfield F170S60 User Manual
F17OS
Open Shelf Equipment Stands
Models
• F17OS36 Open shelf equipment stand 36” in length
• F17OS48 Open shelf equipment stand 48” in length
• F170S60 Open shelf equipment stand 60” in length
• F170S72 Open shelf equipment stand 72” in length
• F170S84 Open shelf equipment stand 84” in length
• F170S96 Open shelf equipment stand 96” in length
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
F17OS: Open Shelf Equipment Stands
F17OS48
Specifications
Top is constructed of stainless steel, with integral front marine
edge nosing and rear backsplash. Spline bars are made of
stainless steel and run front to back on both the left and right
stainless steel sides for support and spline purposes. Two
pieces of C-channel are welded and glued with construction
adhesive to the under side of the top for strength and sound
deadening. As a standard, cutting board brackets are attached
to each side and house a 1.25” thick x 9.5” deep maple cutting
board.
Base is constructed of stainless steel sides. One bottom shelf
constructed of stainless steel with double hemmed nosing is
spot welded between the sides and braced for extra support.
Unit is supported with two leg rails that run the entire length
of the unit. Leg rails are welded to the bottom side of the
unit and are tied together with two braces running front to
back. Caster/leg boxes are welded inside the leg rail and 6.12”
adjustable legs are mounted as standard with (4) 5/16” bolts.
Standard Features
• Top is stainless steel, with integral front
marine edge
• Standard units have unfinished ends
• Stainless steel cutting board brackets with
1.25” thick x 9” deep maple cutting board
• 14-gauge leg rails that run the entire length
of the unit
• Stainless steel bottom shelf
• 6.12” adjustable full stainless steel legs and
bullet feet
• One year parts and 90 day labor standard
warranty
Options &
Accessories
• Stainless steel back
• Stainless steel end
• Laminate back
• Laminate end
• Casters
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Plan View
All Models
30.74"
78cm
9.50"
24cm
Open Shelf Equipment Stands
36.00”
91cm
14.60"
Open Shelf
37cm
Elevation View
F17OS36
10.50"
27cm
14.60"
Open Shelf
37cm
37.25”
95cm
25.50"
65cm
7.62"
19cm
14.60"
37cm
Elevation View
84.00”
213cm
Elevation View
F17OS84
28.7"
10.50”
73cm
27cm
25.25"
64cm
6.12"
16cm
End View
All Models
48.00”
122cm
Open Shelf
F17OS48
Open Shelf
36.00"
91cm
14.60"
37cm
14.60"
37cm
10.50"
27cm
60.00”
152cm
Open Shelf
Elevation View
F17OS60
Open Shelf
Elevation View
96.00”
244cm
F17OS96
14.60"
37cm
Open Shelf
10.50"
27cm
Open Shelf
Elevation View
F17OS72
NOTE: Inside Shelf
Width Is 2" Less Than
Overall Length
72.00”
183cm
Open Shelf
Specifications
Model Number of Shelves Shelf Ft
2
Model Length Ship Weight
F17OS36 1 5.95 36.00” / 91cm 200lbs/ 91kg
F17OS48 1 8.00 48.00” / 122cm 250lbs/ 113kg
F170S60 1 10.15 60.00” / 152cm 300lbs/ 136kg
F170S72 1 12.25 72.00” / 183cm 350lbs/ 159kg
F170S84 1 14.36 84.00” / 213cm 400lbs/ 181kg
F170S96 1 16.46 96.00” / 244cm 475lbs/ 215kg
F17OS
Deleld reserves the right to make changes to the design or specications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
DS17OS
05/12
Loading...