Delfi DelfiScan C85 Quick Reference Manual

DelfiScan C85

General Purpose Corded

Handheld Area Imager

Bar Code Reader

Quick Reference Guide

Delfi Technologies A/S

Galoche Alle 1
4600 Køge
Denmark

Telephone: [phone]

©2013-2014 Delfi Technologies A/S

An Unpublished Work - All rights reserved. No part of the
contents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by
any means without prior written per-mission of Delfi
Technologies A/S. Owners of Delfi products are hereby
granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear
on any reproductions of the documentation.

Electronic versions may either be downloadable from the
Delfi website (www.delfi.com) or provided on appropriate
media.

Disclaimer

Delfi has taken reasonable measures to provide information
in this manual that is complete and accurate, however, Delfi
reserves the right to
change any specification at any time without prior notice.

Patents

This product is covered by one or more of the following pat­ents:

Design patents: EP002158717, ZL201330271434.1
Utility patents: EP0996284B1, EP0997760B1, EP0999514B1,
EP1128315B1, EP1396811B1, EP1413971B1, EP1828957B1,
JP4435343B2, US6478224, US6512218, US6513714,
US6561427, US6808114, US6997385, US7053954, US7075663,
US7234641, US7387246, US7721966, US8245926, US8561906

Quick Reference Guide i

Table of Contents

END USER SOFTWARE LICENSE AGREEMENT (EULA) .....................iii

Software Product Policy ............................................................. vi

Customers Under Software Support ................................ vi

Description .................................................................................... 1

Setting Up the Reader ..

............................................................... 2

Connect/Disconnect Cable to Reader ............................... 2

Using the DelfiScan C85 ............................................................... 3

Selecting the Interface Type .......

................................................ 4

Interface Selection ...................

........................................... 4

Configuring the Interface .......................................... 5

Keyboard Interface .................................................... 6

Scancode Tables...................

...................................... 9

Country Mode............................................................. 9

Caps Lock State........................................................ 13

Numlock...................................

................................. 14

Programming ..

............................................................................15

Using Programming Bar Codes .......................................15

Configure Other Settings ..................................................15

Resetting Product Defaults .............

................................15

Reading Parameters ....

..............................................................16

Aiming System .........

.........................................................16

Good Read Green Spot Duration ...........

..........................16

Operating Modes ....

....................................................................17

Scan Mode ...

......................................................................17

Pick Mode ...

........................................................................19

Multiple Label Reading .......

..............................................19

Technical Specifications ............................................................20

LED and Beeper Indications .....

.................................................23

Error Codes .....

............................................................................26

Cleaning ..

.....................................................................................27

Regulatory Information .............................................................28

Statement of Agency Compliance ...................................28

FCC Class B Compliance Statement ................................28

Canadian Notice ...............

.................................................29

Power Supply ......

...............................................................29

Imager Labeling .......................

..........................................30

WEEE Statement ................

...............................................31

Delfi Technologies .............................................................32

Limited Factory Warranty ........

........................................33

Ergonomic Recommendations ................................................. 34

Services and Support ................................................................. 35

ii

DelfiScan C85

NOTES

Quick Reference Guide iii

Delfi Technologies A/S

END USER SOFTWARE LICENSE AGREEMENT (EULA)

FOR THE DELFISCAN C85

Notice to End User: There are two types of software covered by this END USER
LICENSE AGREEMENT ("EULA"): (1) The Delfi Product you have acquired contains
embedded software ("Embedded Software") which is integral to the Product's
operation; and (2) Optional Application Software provided to you on an optional
basis ("Application Software"). Embedded Software and Application Software are
collectively referred to as "Software" and are subject to the terms and conditions
contained in this EULA. Software is provided only for use with, and for authorized
end users of, the DelfiScan C85 ("Product").

This EULA (End User Software License Agreement) ("EULA” or "Agreement") is a
legally binding agreement governing the licensing of the Software and Documen­tation by Delfi Technologies A/S and its subsidiaries and affiliates ("Delfi") to the
entity or person who has purchased or otherwise acquired a Delfi Product
("End User"). For purposes of this Agreement, any software that is not Embedded
Software or Application Software is software associated with a separate end-user
license agreement is licensed to you under the terms of that license agreement.
Delfi and End User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that
controls, is controlled by, or is under common control with Delfi technologies

1.2 "Documentation" means materials such as user's guides, program reference
guides, quick reference guides, manuals, or similar materials associated withor
related to the Delfi Product, whether in printed, "online", or other form.

1.

3 "Proprietary Information" means: (a) source code, object code, software, docu­mentation, and any related internal design, system design, data base design,
algorithms, technology, technical data or information, implementation tech­niques, and trade secrets related to the Software, (b) any other trade secrets
marked appropriately or identified as proprietary or confidential, and (c) any
information that End User, under the circumstances, should recognize as con­fidential. Proprietary Information does not include any information that the
receiving party can establish was (1) in the public domain, (2) already in the
receiving party's possession or rightfully known prior to receipt, (3) rightfully
learned from a third party not in violation of any other's proprietary rights, or (4)
independently developed without access to Proprietary Information.

1.4 "Delfi Product" means the Delfi's DelfiScan series scanner product,
including all embedded Software in and all Documentation related to such
product, which has been purchased or otherwise acquired by End User,
whether obtained directly or indirectly from Delfi.

1.5 "Software" means any software or computer programs of Delfi or its third party
licensors in machine readable form which is embedded in the Delfi Product,
whether obtained directly or indirectly from Delfi, including any replacement,
update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Delfi grants to End User a non-exclusive, non-transferable, perpetual
license to use the Software, solely on the Delfi Product in which it is
embedded ("designated Delfi Product"), in machine-readable form only, solely
for End User's internal business purposes. This Agreement does not convey
ownership of the Software to End User. Title to the Software shall be and
remain with Delfi or the third party from whom Delfi has obtained a
licensed right. As used in this Agreement, the term "purchase" or its equivalents
when applied to the Software shall mean "acquire under license." End User
is not entitled to receipt or use of the source code to any Software.

2

.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or
otherwise reproduce or remanufacture the Software, whether modified or
unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise
transfer the Software to any other person or organization, for purposes other
than as expressly provided in this Agreement, without Delfi's prior written
consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering,
electronic transfer, or other use of the Software on other than the designated

iv

DelfiScan C85

Delfi Product will be a material breach of this Agreement. However, Delfi may
elect not to terminate this Agreement or the granted licenses, but instead may
elect to notify End User that End User is deemed to have ordered and accepted a
license for each breaching use. End User shall pay Delfi the applicable list price
for such licenses as of the date of such breach.

3

.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or other­wise transfer the Delfi Product to any third party unless such third party agrees
with Delfi in writing to be bound by the terms and conditions of this
Agreement. Any such transfer of the Delfi Product absent such agreement
shall be null and void.

3.3 End User may obtain support for Software from Delfi at Delfi's stanard
support fees and under Delfi's standard support terms and conditions in effect
at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of
Delfi or Delfi's third party licensors and that the Software is protected by
intellectual property laws and treaties. The license set forth in this Agreement
does not transfer to End User any ownership of Delfi's or its third party licensors'
copyrights, patents, trademarks, service marks, trade secrets, or other intel­lectual property rights and End User shall have no right to commence any legal
actions to obtain such rights. End User shall not remove, modify, or take any other
action that would obscure any copyright, trademark, patent marking, or other
intellectual property notices contained in or on the Delfi Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, pro­pr

ietary, and trade secret property of Delfi and Delfi's third party licensors

and End User acquires no right or interest in any Proprietary Information.

5.2 E

nd User shall not disclose, provide, or otherwise make available the Propri­etary Information of Delfi or its third party licensors to any person other than
End User's authorized employees or agents who are under confidentiality
agreement, and End User shall not use the Proprietary Information other than in
conjunction with use of the Delfi Product exclusively for End User's internal
business purposes. End User shall take steps to protect the Proprietary
Information no less securely than if it were End User's own intellectual property.

5

.3 The provisions of this Proprietary Information Section shall survive and

con-tinue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 Delfi warrants that, under normal use and operation, the Delfi Product
will conform substantially to the applicable Documentation for the period
specified in the Documentation. During this period, for all reproducible non­conformities for which Delfi has been given written notice, Delfi will
use commercially reasonable efforts to remedy nonconformities verified by
Delfi. End User agrees to supply Delfi with all reasonably requested
information and assistance necessary to help Delfi in remedying such
nonconformities. For all defects reported to Delfi within the warranty
period, Delfi's liability is limited to providing End User with one copy of
corrections or responding to End User's problem reports according to Delfi's
standard assistance practices. Delfi does not warrant that the product will
meet End User's requirements or that use of the product will be uninterrupted
or error free, or that Delfi's remedial efforts will correct any nonconformance.
This limited warranty does not cover any product that have been subjected
to damage or abuse, whether intentionally, accidentally, or by neglect,
or to unauthorized repair or unauthorized installation, and shall be void
if End User modifies the product, uses the product in any manner other than
as established in the Documentation, or if End User breaches any of the
provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DELFI PRODUCT IS
PROVIDED "AS IS" AND DELFI MAKES NO WARRANTIES OF ANY KIND, EXPRESS
OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANT-ABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 Delfi will defend End User against any claim in a lawsuit that the Delfi
Product furnished hereunder infringe a United States patent or copyright of a
third party and Delfi will pay any damages finally awarded against End User by
a court of competent jurisdiction that are attributable to such claim or will
pay End User's part of any settlement that is attributable to such

Quick Reference Guide v

claim, provided, that 1) End User notifies Delfi promptly in writing of the claim, 2)
Delfi controls the defense or settlement of the claim, and 3) End User cooperates
fully with Delfi in such defense or settlement. All notices of a claim should be sent
to Delfi Technologies A/S, Galoche Alle 1, 4600 Køge, Denmark.

7.2 In the defense or settlement of any such claim, Delfi may, at its option, 1)
procure for End User the right to continue using the Delfi Product, 2) modify
the Delfi Product so that it becomes non-infringing, 3) replace the Delfi Product
with an equivalent product not subject to such claim, or 4) provide End User an
opportunity to return the Delfi Product and receive a refund of the purchase price
paid, less a reasonable allowance for use.

7.3 Delfi shall have no liability to End User for claims of infringement based upon

1) the use of any Delfi Product in combination with any product which Delfi
has not either furnished or authorized for use with such Delfi Product 2) the use
of any Delfi Product designed, manufactured, or modified to the specifications of
End User, or 3) End User's modification of the Delfi Product without written
authorization from Delfi.

7.4 THE FOREGOING STATES DELFI'S COMPLETE AND ENTIRE OBLIGATION
CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL
PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE­MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING
SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON­TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE
PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE
WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DELFI SHALL NOT BE LIABLE FOR ANY
CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL
DELFI'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT,
TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY,
WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER
FOR THE DELFI PRODUCT. UNDER NO CIRCUMSTANCES SHALL DELFI BE
LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA,
INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSE­QUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR
OTHER SIMILAR DAMAGES, EVEN IF DELFI HAS BEEN ADVISED OF THE POS­SIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9

.1 Use, duplication, or disclosure of the Software by the U.S. Government is sub­ject to the restrictions for computer software developed at private expense as set
forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or

52.227-19 or in the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the Delfi Product outside of the United States, End
User must comply with the applicable local laws of the country in which the
Delfi Product is used, with U.S. export control laws, and with the English
language version of this Agreement. The provisions of the "United Nations
Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1Either party

may terminate this Agreement or any license granted under this
Agreement at any time upon written notice if the other party breaches any
provision of this Agreement.

1

0.2Upon termination of this Agreement, End User immediately shall cease using
any nonembedded software and shall return to Delfi or destroy all non­embedded software covered by this Agreement, and shall furnish Delfi with a
certificate of compliance with this provision signed by an officer or authorized
representative of End User. For embedded software, End User agrees to sign a
waiver prepared by Delfi concerning further use of the embedded Software. End
User's resumed or continued use of the embedded Software after termination
shall constitute End User's agreement to be bound by the terms and conditions of
this Agreement for such use.

11. General Provisions.

1

1.1 Entire Agreement; Amendment. This document contains the entire
agree-ment between the parties relating to the licensing of the Software and
super-sedes all prior or contemporaneous agreements, written or oral, between
the parties concerning the licensing of the Software. This Agreement may not be
changed, amended, or modified except by written document signed by
Delfi.

Software Product Policy

vi

DelfiScan C85

11.2 Notice. All notices required or authorized under this Agreement shall be given
in writing, and shall be effective when received, with evidence of receipt.
Notices to Delfi shall be sent to the attention of Contract Administration, Delfi
Technologies A/S, Galoche Alle 1, 4600 Køge, Denmark., or such other address as
may be specified by Delfi in writing.

1

1.3 Waiver. A party's failure to enforce any of the terms and conditions of this
Agreement shall not prevent the party's later enforcement of such terms and
conditions.

1

1.4 Governing Law; Venue: This Agreement and the rights of the parties hereun­der shall be governed by and construed in accordance with the laws of the
State of Oregon U.S.A, without regard to the rules governing conflicts of law. The
state or federal courts of the State of Oregon located in either Multnomah or Lane
counties shall have exclusive jurisdiction over all matters regarding this
Agreement, except that Delfi shall have the right, at its absolute discretion, to
initiate proceedings in the courts of any other state, country, or territory in which
End User resides, or in which any of End User's assets are located.

11.5 Attorneys' Fee

s. In the event an action is brought to enforce the terms and
conditions of this Agreement, the prevailing party shall be entitled to reason-able
attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Delfi reserves the right to ship its products with the latest
version of software/firmware available. This provides our
customers with the very latest in Delfi software
technology.

The only exception to this policy is when the buyer has
a signed contract with Delfi that clearly defines the
terms and conditions for making software/firmware
changes in products shipped to the buyer.

Customers Under Software Support

Customers that elect to subscribe to Delfi Software
Maintenance and Support Agreement will receive 30 days
advance notification of: (1) the release of a new software
version; and/or (2) discontinuation of any prior software
version that will no longer be supported. Delfi will provide
maintenance for a fee that will assist customers in
transitioning to the next software version. If a customer is
currently using the software version being discontinued,
the customer may elect to transition to any one of the
newer versions, depending on the hardware in use.

To arrange for a Software Maintenance and Support
Agreement please contact your Delfi sales person.

Quick Reference Guide 1

DelfiScan C85

Description

The DelfiScan C85 2D imager has been specifically created to
meet the market demand for omni-directional reading
performance on virtually all codes at an affordable price. Ele­gant design details are incorporated into a smaller, balanced
lightweight enclosure without sacrificing Delfi's wellknown
durability.
Ideally suited for applications at the point-of-sale (POS), the
DelfiScan C85 imager features a new illumination and aiming
system developed with the unique intent to reduce visual
stress of the operator during the daily scanning activities. It
consists of a soft, dark red illumination combined with two
blue LED triangles pointing at the targeted bar code. The
result is a precise aiming system which contributes to low eye
fatigue, yet still allows top operator efficiency.
Constructed with a combination of design and performance­based ideals such as bar code reading snappiness, motion tol­erance, perfect ergonomics and an attractive price, this 2D
imager is the ideal solution for the customer who is looking to
replace their linear only reading scanners with image-based
technology.

Omni­Directional
Operating

To read a symbol simply aim the reader and pull
the trigger. The DelfiScan C85 is a powerful
omni-directional reader, so the orientation of the
symbol is not important.
‘Green Spot’ for good-read feedback helps to
improve productivity in noisy environments or in
situations where silence is required. When
using the product with the cradle at a 45°
position, the aiming pattern can work as an
aiming system to aid in positioning the
bar code for quick and intuitive reading.

Setting Up the Reader

2

DelfiScan C85

Setting Up the Reader

Follow the steps below to connect and get your reader up and

communicating with its host.

1. Connect the Cable to the reader and the Host.

2. Configure the Interface (see page 5).

3. Configure the Reader starting on page 15 (optional,
depends on settings needed).

Con

nect/Disconnect Cable to Reader

Figure 1. Connecting to the Reader

Host Connection —

The QuickScan plugs directly into the host
device as shown in Figure 2. The power can also be supplied
through an external power supply via the Interface Cable
sup-plied with a power jack.

Decoding

Reliably decodes all standard 1D (linear) and 2D
bar

codes, including GS1 DataBar™ linear codes,
Postal Codes (China Post), Stacked Codes (such as
GS1 DataBar Expanded Stacked, GS1 DataBar
Stacked, GS1 DataBar, Stacked Omnidirectional).
The data stream — acquired from decoding a
sym-bol — is rapidly sent to the host. The reader
is immediately available to read another symbol.

Side View

Rear
View

Using the DelfiScan C85

Quick Reference Guide 3

Figure 2. Connecting to the Host

Using the DelfiScan C85

The DelfiScan C85 normally functions by capturing and
decoding codes. The aiming system is activated on trigger
pull and indicates the center of the field of view which
should be positioned over the bar code:

Aiming System

Relative Size and Location of Aiming System Pattern

U

S

B

Side
View

Linear bar

2D Matrix symbol

Selecting the Interface Type

4

DelfiScan C85

A beam illuminates the label. The projected pattern of the
aiming system will be smaller when the reader is closer to the
bar code and larger when it is farther from the code.
Symbolo-gies with smaller bars or elements (mil size) should
be read closer to the unit. Symbologies with larger bars or
elements (mil size) should be read farther from the unit.
If the aiming system is centered you will get a good read.
Suc-cessful reading is signaled by an audible tone plus a
good-read green spot LED indicator.
Reference the DelfiScan C85 Product Reference Guide (PRG)
on the Delfi website for more information about this feature
and other programmable settings.

Selecting the Interface Type

Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type the reader is connected to (for example: RS-232,
Keyboard W

edge, USB, etc.) and scan the appropriate bar

code to select your system’s correct interface type.

Interface Selection

The reader model will support one of the following sets of
host interfaces:

General Purpose Models —

RS-232, RS-232 O

POS, USB,

Key-board Wedge.

Retail Point of Sale Models —

RS-232, RS-232 OPOS, USB.
Information and programming options for each interface type
are provided in this section. For defaults and additional
infor-mation associated with each interface, proceed to the
corre-sponding chapter in the DelfiScan C85 PRG.

Selecting the Interface Type

Quick Reference Guide 5

Configuring the Interface

Scan the appropriate programming bar code to select
the interface type for your system.

Unlike some other programming features and
options, interface selections require that you
scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scan­ning an interface selection bar code.

Some interfaces require the scanner to start in
t

he disabled state when powered up. If addi­tional scanner configuration is desired while in
this state, pull the trigger and hold for 5 sec­onds. The scanner will change to a state that
allows programming with bar codes.

RS-232

RS-232 standard interface

Select RS232-STD

RS-232 Wincor-Nixdorf

Select RS232-WN

RS-232 for use with OPOS/UPOS/JavaPOS

Select RS-232 OPOS

Selecting the Interface Type

6

DelfiScan C85

RS-232 (continued)

USB Com to simulate RS-232 standard interface

Select USB-COM-STD

a

USB-OEM

USB-OEM (can be used for OPOS/UPOS/JavaPOS)

Select USB-OEM

a .Download the correct USB Com driver from www.delfi.com

Keyboard Interface

Use the programming bar codes to select options for
USB Keyboard and Wedge Interfaces.

KEYBOARD

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/

Standard Key Encoding

Select KBD-AT

Keyboard Wedge for IBM AT PS2 with standard key

encoding but without external keyboard

Select KBD-AT-NK

Selecting the Interface Type

Quick Reference Guide 7

KEYBOARD (continued)

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &

95 w/Alternate Key

Select KBD-AT-ALT

Keyboard Wedge for IBM AT PS2 with alternate key

encoding but without external keyboard

Select KBD-AT-ALT-NK

PC/XT

w/Standard Key Encoding

Select KBD-XT

Keyboard Wedge for IBM Terminal 3153

Select KBD-IBM-3153

Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx

make break keyboard

Select KBD-IBM-MB

Selecting the Interface Type

8

DelfiScan C85

KEYBOARD (con

tinued)

USB Keyboard with alternate key encoding

Select USB Alternate Keyboard

USB Keyboard for Apple computers

Select USB-KBD-APPLE

Keyboard Wedge for DIGITAL

Terminals VT2xx, VT3xx, VT4xx

Select KBD-DIG-VT

USB Keyboard with standard key encoding

Select USB Keyboard

Selecting the Interface Type

Quick Reference Guide 9

Scancode Tables

Reference the DelfiScan C85 PRG for information about
control character emulation for keyboard interfaces.

Country M

ode

This feature specifies the country/language supported by the
keyboard. Only these interfaces support ALL Country Modes:

• USB Keyboard (without alternate key encoding)

• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Std Key Encoding

• Keyboard Wedge for IBM AT PS2 with standard key
encoding but without external keyboard

• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
without Alternate Key

• Keyboard Wedge for IBM AT PS2 without alternate
key encoding but without external keyboard

All other interfaces support ONLY the following Country
Modes: U.S., Belgium, Britain, France, Germany, Italy, Spain,
Sweden.

COUNTRY MODE

ENTER/EXIT PROGRAMMING MODE

Country Mode = U.S.

Country Mode = Belgium

Selecting the Interface Type

10

DelfiScan C85

COUNTRY MODE (continued)

Country Mode = Croatia*

Country Mode = Czech Republic*

Country Mode = Denmark*

Country Mode = France

Country Mode = French Canadian*

Country Mode = Germany

*

Supports only the interfaces listed in the Country Mode feature description

$CKBCO13(CR)

Selecting the Interface Type

Quick Reference Guide 11

COUNTRY MODE (continued)

Country Mode = Hungary*

Country Mode = Italy

Country Mode = Japanese 106-key*

Country Mode = Lithuanian*

Country Mode = Norway*

Country Mode = Poland*

*

Supports only the interfaces listed in the Country Mode feature description

Selecting the Interface Type

12

DelfiScan C85

COUNTRY MODE (continued)

Country Mode = Portu

gal*

Country Mode = Romania*

Country Mode = Spain

Country Mode = Sweden

Country Mode = Slovakia*

Country Mode = Switzerland*

*

Supports only the interfaces listed in the Country Mode feature description

Selecting the Interface Type

Quick Reference Guide 13

Caps Lock State

This option specifies the format in which the reader sends
character data. This applies to keyboard wedge interfaces.
This does not apply when an alternate key encoding keyboard
is selected.

CAPS LOCK STATE

ENTER/EXIT PROGRAMMING MODE

Caps Lock State = Caps Lock OFF

Caps Lock State = Caps Lock ON

Caps Lock State = AUTO Caps Lock Enable

Selecting the Interface Type

14

DelfiScan C85

Numlock

This option specifies the setting of the Numbers Lock (Num­lock) key while in keyboard wedge interface. This only applies
to alternate key encoding interfaces. It does not apply to
USB keyboard.

NUMLOCK

ENTER/EXIT PROGRAMMING MODE

Numlock = Numlock key unchanged

Numlock = Numlock key toggled

Programming

Quick Reference Guide 15

Programming

The reader is factory-configured with a set of standard
default features. After scanning the interface bar code
from the Interfaces section, select other options and
customize your reader through use of the programming bar
codes available in the DelfiScan C85 PRG. Check the
corresponding features section for your interface, and also
the Data Editing and Symbologies chapters of the PRG.

Using Programming Bar Codes

This manual contains bar codes which allow you to
reconfig-ure your reader. Some programming bar code
labels, like the "Reset Default Settings" on page 15, require
only the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Program­ming Mode prior to scanning them. Scan an ENTER/EXIT
bar code once to enter Programming Mode; scan the desired
parameter settings; scan the ENTER/EXIT bar code again to
accept your changes, which exits Programming Mode and
returns the reader to normal operation.

Con

figure Other Settings

Additional programming bar codes are available in the PRG
to allow for customizing programming features. If your
installa-tion requires different programming than the
standard fac-tory default settings, refer to the PRG.

Resetting Product Defaults

If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your cus­tom factory settings restored, scan the bar code below to
reset the reader to its initial configuration. Reference the
PRG for other options, and a listing of standard factory
settings.

Factory defaults are based on the int

erface
type. Be sure your reader is configured for the
correct interface before scanning this label.
See "Selecting the Interface Type" on page 4
for more information.

Reset Default Settings

Reading Parameters

16

DelfiScan C85

Reading Parameters

Move the reader toward the target and center the aiming
pat-tern and illumination system to capture and decode the
image. See Using the DelfiScan C85 on page 3 for more
information.
The aiming system will briefly switch off after the acquisition
time, and if no code is decoded will switch on again before the
next acquisition. The illuminator will remain on until the sym­bol is decoded.
As you read code symbols, adjust the distance at which you
are holding the reader.

Aiming System

A number of options for customizing control of the Aiming
System are available. See the DelfiScan C85 PRG for more
information and programming bar codes.

G

ood Read Green Spot Duration

Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration of
the good read pointer beam after a good read.

GOOD READ GREEN SPOT DURATION

ENTER/EXIT PROGRAMMING MODE

Disabled

♦

Short (300 ms)

Medium (500 ms)

Long (800 ms)

Operating Modes

Quick Reference Guide 17

Operating Modes

S

can Mode

The imager can be set to operate in one of several scanning
modes. See the PRG for more information and settings for
any of the options:

Trigger Single (Default) —

This mode is associated with typical

handheld reader operation. When the trigger is pulled,

illumi­nation is turned on and the scanner attempts to read a label.
Scanning is activated until one of the following occurs:

•

the programmable “maximum scan on time”1 has
elapsed

• a label has been read

• the trigger is released

Trigger Pulse Multiple —

Scanning begins when the trigger is
pulled and continues after the trigger is released, until the
trigger is pulled again or until the programmable “maximum
scan on time”1 has elapsed. Reading a label does not disable
scanning. Double Read Timeout1 prevents undesired

multiple reads while in this mode.

Trigger Hold Multiple —

W

hen the trigger is pulled, scanning
starts and the product scans until the trigger is released or
“maximum scan on time”1 has elapsed. Reading a label does
not disable scanning. Double Read Timeout1 prevents unde-

sired multiple reads while in this mode.

Always On —

The illuminator is always ON and the reader

is always ready for code reading. Double Read Timeout1
pre-vents undesired multiple reads.

Flashing —

The reader illuminator flashes on and off regard­less of the trigger status. Code reading takes place only
during the F

lash On2 time. Double Read Timeout1 prevents

undesired multiple reads.

Object Detection —

The scanner looks for changes within its
field-of-view. The Aiming Pattern is always on to show the
optimum reading area. If a predefined amount of movement
is detected, the red illumination switches on. Scanning con­tinues until a label is read or "maximum scan on time" is
reached.

1. See the Product Reference Guide (PRG) for these and
other programmable features

2. Controlled by Flash On Time and Flash Off Time. Use
the PRG to program these options.

Operating Modes

18

DelfiScan C85

SCAN MODE

♦

Scan Mode = Trigger Single

Scan Mo

de =

Trigger Pulse

Multiple

Scan Mo

de =

Trigger Hold

Multiple

Scan Mode = Flashing

Scan Mode = Always On

Scan Mode =

Object Detection

Operating Modes

Quick Reference Guide 19

Pick Mode

Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern, which is
the area indicated by the two blue arrows. Pick Mode is a
Decod-ing and Transmission process where bar codes that
are not within the configurable distance from the center of
the aiming pattern are not acknowledged or transmitted to
the host. It is active only while the scanner is in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.

M

ultiple Label Reading

The reader offers a number of options for multiple label read­ing. See the PRG or software configuration tool for descrip­tions of these features and programming labels.

This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.

PICK MODE

ENTER/EXIT PROGRAMMING MODE

♦

PIck Mode = Disable

Pick Mode = Enable

Technical Specifications

20

DelfiScan C85

Technical Specifications

The following table contains Physical and Performance Char-

acteristics, User Environment and Regulatory information.

Item Description

Physical Characteristics

Color Black & white

Dimensions

Height 6.4"/163 mm
Length 3.6"/91 mm
Width 1.6"/41 mm

Weight (without cable) Approximately 5.1 ounces/145 g

Electrical Characteristics

Voltage & Current

Input Voltage: 4.5 - 14.0VDC

Operating (typical): 140mA
Operating (max): 380mA

Idle/standby (typical): 50mA

Performance Characteristics

Light Source LEDs

Roll (Tilt) Tolerance Up to ± 360°

Pitch Tolerance ± 65°

Skew (Yaw) Tolerance ± 60°

Print Contrast Minimum 25% minimum reflectance

Technical Specifications

Quick Reference Guide 21

Depth of Field (Typical)

a

a. 13 mils DOF based on EAN. All other 1D codes are Code 39. All labels grade A, typical environmental light,

20°C, label inclination 10°

Symbology

Code 39

5mil: 0.2" - 5.9" (0.5 - 15cm)
10mil: 0" - 8.7" (0 - 22cm)
20mil: up to 16" (40cm)

EAN

7.5mil: 0" - 5.9" (0 - 15cm)
13mil: 0.2" - 13.8" (0.5 ­35cm)

PDF-417

6.6mil: 0.39" - 5.1" (1.0 - 130cm)
10mil: 0" - 8.3" (0 - 21cm) 15mil:

0.2" - 9.5" (0.5 - 24cm)

DataMatrix

10mil: 0.39" - 5.1" (1.0 - 13 cm)
15mil: 0" - 7.1" (0 - 18cm)

QR Code

10mil: 0.2" - 5.1" (0.5 - 13cm)
15mil: 0" - 7.1" (0 - 18cm)

Minimum
Element Width

Standard Range:

1D Min Resolution = 4 mil
PDF-417 Min Resolution = 5 mil
Datamatrix Min Resolution = 7.5 mil

Technical Specifications

22

DelfiScan C85

Decode Capability

1D Bar Codes

UPC/EAN/JAN (A, E, 13, 8); UPC/EAN/JAN (including P2 /P5); UPC/EAN/JAN (including; ISBN /
Bookland & ISSN); UPC/EAN Coupons; Code 39 (including full ASCII); Code 39 Trioptic; Code39
CIP (French Pharmaceutical); LOGMARS (Code 39 w/ standard check digit enabled); Danish
PPT; Code 32 (Italian Pharmacode 39); Code 128; Code 128 ISBT; Interleaved 2 of 5 ;
Standard 2 of 5; Interleaved 2 of 5 CIP (HR); Industrial 2 of 5; Discrete 2 of 5; Matrix 2 of 5;
IATA 2of5 Air cargo code; Code 11; Codabar; Codabar (NW7); ABC Codabar; EAN 128; Code
93 ; MSI; PZN; Plessey; Anker Plessey; GS1 DataBar Omnidirectional; GS1 DataBar Limited;
GS1 DataBar Expanded; GS1 DataBar Truncated; DATABAR Expanded Coupon.

2D / Stacked Codes

The

DelfiScan C85 sc

anne

r is capable of decoding the following sybmologies using mul-

tiple frames (i.e. Multi-Frame Decoding):

Datamatrix; Inverse Datamatrix; Datamatrix is configurable for the following parameters:;
Normal or Inverted; Square or Rectangular Style; Data length (1 - 3600 characters); Maxi­code; QR Codes (QR, Micro QR and Multiple QR Codes); Aztec; Postal Codes - (Australian
Post; Japanese Post; KIX Post; Planet Code; Postnet; Royal Mail Code (RM45CC); Intelligent
Mail

Barcode (IMB); Sweden Post; Portugal Post); LaPoste A/R 39; PDF-417; MacroPDF; Micro
PDF417; GS1 Composites (1 - 12); French CIP13

a

; GS1 DataBar Stacked; GS1 DataBar Stacked

Omnidirectional; GS1 DataBar Expanded Stacked; GSI Databar Composites; Chinese
Sensible Code; Inverted 2D codesb .

a

It is acceptable to handle this with ULE

b

The SW can apply the Normal/Reverse Decoding Control to the following symbologies: Datamatrix, QR,

Micro QR, Aztec and Chinese Sensible Code.

Interfaces Supported

RS-232, Keyboard Wedge, USB Com Std., USB
Keyboard, USB OEM

User Environment

Operating Temperature 0° to 50° C (32° to 122° F)

Storage Temperature -40° to 70 °C (-40° to 158° F)

Humidity

Operating: 0% to 95% relative
humidity, non-condensing

Drop Specifications

Scanner withstands 18 drops from 1.5 meters (5.0 feet) to
concrete

Ambient Light Immunity Up to 86,000 Lux

LED and Beeper Indications

Quick Reference Guide 23

LED and Beeper Indications

The reader’s beeper sounds and its top multi-colour LED illu­minates to indicate various functions or errors on the reader.
An optional “Green Spot” also performs useful functions. The
following tables list these indications.

One exception to the
behaviors listed in the tables is that the reader’s functions
are programmable, and so may or may not be turned on. For
example, certain indications such as the power-up beep can
be disabled using programming bar code labels.

Contaminants Spray/rain
Dust/particulates

IEC 529-IP42
(IP51 QD2430-E model only)

ESD Level 16 KV

Regulatory

Electrical Safety UL 60950, CSA C22.2 No. 60950, IEC 60950

EMI/RFI

North America (FCC) : Part 15 Class B; Canada ( IC) : ICES­003 Class B; Russia ( Gost); European Union EMC Directive;
VCCI-Japan; Korean KCC; Taiwan EMC (BSMI);
Australia (ACMA); Mexico (NOM)

Indicator Description LED Beeper

Power-up Beep

The reader is in the pro­cess of powering-up.

Reader beeps four
times at highest fre­quency and volume
upon power-up.

Good Read Beep

A label has been suc­cessfully scanned by
the reader.

LED behavior for this
indication is configu­rable via the feature
“Good Read: When to
Indicate”
(see the PRG for infor­mation.)

The reader will beep
once at current fre­quency, volume,
mono/bi-tonal set­ting and duration
upon a successful
label scan.

ROM Failure

There is an error in the
reader's software/pro­gramming

Flashes

Reader sounds one
error beep at highest
volume.

LED and Beeper Indications

24

DelfiScan C85

Limited Scanning
Label Read

Indicates that a host
connection is not
established.

N/A

Reader 'chirps' six
times at the highest
frequency and current
volume.

Reader Active Mode

The reader is active and
ready to scan.

The LED is lit steadily

a

N/A

Reader
Disabled

The reader has been
disabled by the host.

The LED blinks contin­uously

N/A

Green Spot

a

flashes

momentarily

Upon successful read of
a label, the software
shall turn the green
spot on for the time
specified by the config­ured value.

N/A N/A

a

Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

Indicator Description LED Beeper

LED and Beeper Indications

Quick Reference Guide 25

Programming Mode

-

The following indications ONLY occur

when the reader is in Programming Mode

.

INDICATION DESCRIPTION LED BEEPER

Label Programming
Mode Entry

A valid programming label
has been scanned.

LED blinks contin-

uously

Reader sounds four
low frequency beeps.

Label Programming
Mode Rejection of
Label

A label has been rejected. N/A

Reader sounds three
times at lowest fre­quency and current
volume.

Label Programming
Mode Acceptance of
Partial Label

In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is suc­cessfully scanned.

N/A

Reader sounds one
short beep at highest
frequency and cur­rent volume.

Label Programming
Mode Acceptance of
Programming

Configuration option(s)
have been successfully pro­grammed via labels and
the reader has exited Pro­gramming Mode.

N/A

Reader sounds one
high frequency beep
and 4 low frequency
beeps followed by
reset beeps.

Label Programming
Mode Cancel Item
Entry

Cancel label has been
scanned.

N/A

Reader sounds two
times at low fre­quency and current
volume.

Error Codes

26

DelfiScan C85

Error Codes

Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated.

Press and
release the trigger to hear the FRU indication code.
The following table describes the LED flashes/beep codes
associated with an error found.

Number

of LED

Flashes/

Beeps

Error Corrective Action

1 Configuration

Contact Helpdesk for assis-

tance

2Interface PCB

6 Digital PCB

11 Imager

Cleaning

Quick Reference Guide 27

Cleaning

Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning.

Use a soft, dry cloth to clean the product. If the product is very
soiled, clean it with a soft cloth moistened with a diluted
non-aggressive cleaning solution or diluted ethyl alcohol.

CAUTION

Do not use abrasive or aggressive cleansing
agents or abrasive pads to clean scan window

s

or plastics.

Do not spray or pour liquids directly onto t

he

unit.

Regulatory Information

28

DelfiScan C85

Regulatory Information

All models are designed to be compliant with rules and regu­lations in locations they are sold and will be labeled as
required.
Any changes or modifications to equipment, not expressly
approved by Delfi could void the user's authority to operate
the equipment.

S

tatement of Agency Compliance

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.

FCC

Class B Compliance Statement

The user is cautioned that changes or modifications not
expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal­lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that inter­ference will not occur in a particular installation. If this equip­ment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the inter­ference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment
and receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con­nected.

• Consult the dealer or an experienced radio or televi­sion technician for help.

Regulatory Information

Quick Reference Guide 29

Can

adian Notice

This equipment does not exceed the Class B limits for radio
noise emissions as described in the Radio Interference Regu­lations of the Canadian Department of Communications.
Le present appareil numerique n’emet pas de bruits radio­electriques depassant les limites applicables aux appareils
numeriques de la classe B prescrites dans le Reglement sur le
brouillage radioelectrique edicte par le ministere des Commu­nications du Canada.

Power Supply

This device is intended to be connected to a UL Listed/CSA
Certified computer which supplies power directly to the
reader or else be supplied by UL Listed/CSA Certified Power
Unit marked “Class 2” or LPS power source rated 5-14V mini­mum 900mA.
QD2430 can be powered by either a 5V or 12V power supply.

CAUTION

Do not attempt to open or otherwise service any
components in the optics cavity.

Opening or ser­vicing any part of the optics cavity by
unautho-rized personnel may violate safety
regulations.

Atencíon

Características de la fuente

de alimentación eléctrica.

5 V

Entrada:

100 - 240 Vca
350 mA, 50-60 HZ

Salida:

5VDC, 2.5A ?
(-)Negativo al centro

12 V

Entrada:

100 - 240 Vca
600 mA, 50-60 HZ

Salida:

12VDC, 1500mA ?
(-)Negativo al centro

Utilice en su red solo fuentes certificadas en Argentina.

El uso de fuentes de alimentación no compatibles puede resultar
en riesgo de incendio o de choque eléctrico para el usuario.

Regulatory Information

30

DelfiScan C85

Imager Labeling

Sample labels are shown here to illustrate their location only.
Please view the labels on your product for actual details, as
they may vary from those depicted.

CAUTION

The DelfiScan Handheld Reader is not user­serviceable. Opening the case of the unit can
cause internal damage and will void the war­ranty.

Scanner Regulatory

Regulatory Information

Quick Reference Guide 31

WEEE Statement

English

For information about the disposal of Waste Electrical and
Electronic Equipment (WEEE), please refer to the website
at www.delfi.com.

Italian

Per informazioni sullo smaltimento delle
apparecchiature elettriche ed elettroniche consultare il
sito Web
www.delfi.com.

French

Pour toute information relative à l’élimination des déchets
électroniques (WEEE), veuillez consulter le site internet
www.delfi.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik­Altgeräten (WEEE) erhalten Sie auf der Webseite
www.delfi.com.

Spanish

Si desea información acerca de los procedimientos para
el desecho de los residuos del equipo eléctrico y
electrónico (WEEE), visite la página Web www.delfi.com.

Portuguese

Para informações sobre a disposição de Sucatagem de
Equipamentos Elétricos e Eletrônicos (WEEE -Waste Electrical
and Electronic Equipment), consultar o site web
www.delfi.com.

Chinese

有关处理废弃电气电子设备 (

WEEE)

的信息， 请参考

Delfi

公司的网站

www.delfi.com

。

Japanese

廃電気電子機器 (WEEE) の処理についての関連事項は
Delfiのサイト www.delfi.com をご参照下さい。

Waste Electrical and Electronic
Equipment (WEEE) Statement

Regulatory Information

32

DelfiScan C85

Delfi Technologies
Limited Factory Warranty

Warranty Coverage

Delfi warrants to Customer that Delfi's products will be free from
defects in materials and workmanship for a period of one years from
product shipment. Delfi Technologis (“Delfi”) hardware products are
warranted against defects in material and workmanship under
normal and proper use. The liability of Delfi under this warranty is
limited to furnishing the labor and parts necessary to remedy any
defect covered by this warranty and restore the product to its
normal operating condition. Repair or replacement of product during
the warranty does not extend the original warranty term. Products
are sold on the basis of specifications applicable at the time of
manufacture and Delfi has no obligation to modify or update
products once sold.

If Delfi determines that a product has defects in material or
workmanship, Delfi shall, at its sole option repair or replace the
product without additional charge for parts and labor, or credit or re­fund the defective products duly returned to Delfi. To perform re­pairs, Delfi may use new or reconditioned parts, components,
subassemblies or products that have been tested as meeting appli­cable specifications for equivalent new material and products. Cus­tomer will allow D elfi to scrap a ll parts removed from the
repaired product. The warranty period shall extend from the date of
shipment from Delfi for the duration published by Delfi for the
product at the time of purchase (Warranty period). Delfi warrants
repaired hardware devices against defects in workmanship and
materials on the repaired assembly for a 90 day period starting from
the date of shipment of the repaired product from Delfi or until the
expiration of the original warranty period, whichever is longer.
Delfi does not guarantee, and it is not responsible for, the mainte­nance of, damage to, or loss of configurations , data, and applications
on the repaired units and at its sole discretion can return the units in
the “factory default” configuration or with any software or firmware
update available at the time of the repair (other than the firmware or
software installed during the manufacture of the product). Customer
accepts responsibility to maintain a back up copy of its software and
data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer
must notify Delfi of the claimed defect before the expiration of the
ap-plicable Warranty period and return the product back to Delfi
service center. If Delfi determines Customer’s claim is valid, Delfi
will repair or replace product without addition al charge for parts
and labor. Customer shall be responsible for packaging and
shipping the product to Delfi service center, with shipping charges
prepaid. Delfi shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the Delfi
service center is located. Customer shall be responsible for paying
all shipping charges, duties, taxes, and any other charges for
products returned to any other locations. Failure to follow the
applicable RMA policy, may result in a processing fee. Customer
shall be responsible for return shipment expenses for products
which Delfi, at its sole discretion, determines are not

Regulatory Information

Quick Reference Guide

33

defective or eligible for warranty repair.

Warranty Exclusions

The Delfi Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered,

repaired or upgraded by other than Delfi service person­nel or its authorized representatives;

(ii) any claimed defect, failure or damage which Delfi

determines was caused by faulty operations, improper use,
abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or
supplied by Delfi;

(iii) any claimed defect or damage caused by the use of product

with any other instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to pro-

vid

e proper maintenance, including but not limited to clean-

ing the upper window in accordance with product manual;

(v) any defect or damage caused by natural or man-made

disaster such as but not limited to fire, water damage, floods,
other natural disasters, vandalism or abusive events that
would cause internal and external component damage or
destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring

action as for example firmware or software upgrades, soft­ware or hardware reconfigurations etc.;

(vii) the replacement of upper window

/cartridge due to scratch-

ing, stains or other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply,

batteries, keypads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obliga­tions under this warranty except to a purchaser or transferee of
prod-uct. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Delfi.

DELFI'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WAR­RANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR
OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WAR­RANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR­POSE, OR NONINFRINGEMENT. DELFI SHALL NOT BE LIABLE FOR
ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DE-LAYS
IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE
ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS
THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY
CLAIMS. UNDER NO CIRCUMSTANCES WILL DEFLI BE LIABLE TO
CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT
DAMAGES REGARDLESS OF WHETHER DELFI HAD ADVANCE
NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to
Delfi. Delfi shall assume risk of loss or damage for product in Delfi’s
possession. In the absence of specific written instructions for the
return of product to Customer, Delfi will select the carrier, but Delfi
shall not thereby assume any liability in connection with the return
shipment.

Ergonomic Recommendations

34

DelfiScan C85

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy
reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

CAUTION

In order to avoid or minimize the pot

ential risk
of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company’s safety programs to prevent employee
injury.

Services and Support

Quick Reference Guide

35

Services and Support

Delfi provides several services as well as technical support
through its website.
Please check our website at www.delfi.com/en for further
information.

Services and Support

36

DelfiScan C85

NOTES

Services and Support

Quick Reference Guide

37

NOTES

www.delfi.com

(Rev 0.9.0.5)

Denmark

Galoche Alle 1
4600 Køge
Tel. [phone]

Sweden

Solkraftsvägen 25
135 70 Stockholm
Tel. [phone]

Norway

Rugdetrekket 2
3370 Vikersund
Tel. [phone]

www.delfi.com

[e-mail]