De La Espada LIGHT EXTENDING TABLE BY MATTHEW HILTON Assembly Instructions Manual
0
1
M
A
T
T
H
E
W
H
I
L
T
O
N
PARTS
1x Tabletop
2x Extension leaves
2x Leg frames
1x Cross beam
Hardware:
(4x) Universal connector (4x) Metal dowel
(8x) M8x40 bolts (3x) M8x60 bolts
(11x) washers
YOU WILL NEED
-6mm Allen Key
-The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a at
and stable surface. This will ensure a good nal result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone ooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in A poor connection.
ASSEMBLY INSTRUCTIONS
LIGHT EXTENDING TABLE BY MATTHEW HILTON
SALES@DEL AESPADA.CO M
DELAESPADA.COM
0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
b) Match the number on each leg frame with the number marking
on the tabletop and crossbeam.
c) Attach one leg frame to the cross beam by inserting the
metal dowels on the leg into the universal connectors on the
crossbeam. Tighten with an Allen Key.
NOTE: The recessed holes for the M8 bolts on the cross beam
should face downwards.
Repeat the steps to connect the second leg frame.
ASSEMBLY INSTRUCTIONS CONTINUED
LIGHT EXTENDING TABLE
NOTE 6: While you work, be sure all connections are ush with
no gaps.
NOTE 7: After assembly, ensure that the table is resting on a
level surface
INSTRUCTIONS
1. ATTACH LEGS TO THE CROSS BEAM
a) Insert metal dowels into the holes on the side of the leg
frames by screwing them in a clockwise direction until tight.
detail
SALES@DEL AESPADA.CO M
DELAESPADA.COM
Loading...