features, or add safety to the exterior of your home. These versatile lights can be used indoors and out. They are waterproof, very
durable, and backed by a 10 year warranty.
For more information call 1.800.258.0344, or connect to our responsive chat messenger at dekorlighting.com.
1/2” Forstner Bit
EZ Indoor Timer
(1.27 cm)
120VAC to 12VDC
Transformer
DEKOR Transformer
T-Splitter
Transconnector Cable (20 ft)
includes:
EZ Plug-N-Play Transconnector Cable (20 ft)
EZ Transformer
EZ Indoor Timer
Power Drill
T-Splitters
10 ft Cables
5 ft Cables
HELPFUL TIPS
»
Follow the appropriate building and electrical codes when
installing all DEKOR® lighting products.
»
»
It is recommended to determine placement of lighting under
dark conditions prior to drilling/installation.
» DO NOT use more than one transformer on each circuit.
» To ensure all components are in working condition it is recom-
mended to have power source attached and on when installing
lights.
TOOLS NEEDED
1/2” Forstner Bit
CAUTION:
When making a connection between
a Plug-N-Play connector or a splitter;
observe the polarity key to make the proper connection.
MUST MATCH UP. Do not force the connectors together.
Plug-N-Play connectors are waterproof, but if there is
constant exposure to water, use of dielectric grease is
mandatory at all connections. Dielectric grease should be
added prior to connection.
(1.27 cm)
Exterior Wall
Polarity Key
NOTE: Construction methods are constantly changing. For the most up-to-date installation instructions visit: www.DEKORLIGHTING.com
Have Questions? Call 1–800-258-0344
©2019 DEKOR®, Denver, CO
Planning:
NOTE: Prior to installation
supply, timer, and dimmer. These need to be
accessible. A GFCI outlet is required to help prevent
damage to lights due to electrical incidents.
1. Plug the timer into a GFCI outlet located in a dry area.
2. You must install the timer vertically with the receptacle
facing down. The timer and transformer must be
installed as per local/state and federal water safety
regulations.
GFCI Outlet
1
SOFFIT LED LIGHTING INSTALLATION
Live wiring installation (install with connected/activated lights) is
recommended to ensure complete connection and functionality.
1. Determine location of power source (external/interior outlet).
2. Connect 20’ transconnect cable to EZ transformer.
3. Plug EZ transformer into timer (if applicable).
4. Plug timer into power source (external/interior outlet).
5. Turn the timer to ON.
lights prior to drilling holes.
Determine your location, drill holes, run cables, and make sure
4
5’
EZ
3
Timer
EZ Transformer
120VAC to 12VDC
Transformer
(Illustration not to scale)
Note:
lights aliigns with listed maximum capacity table. If the amount of
lights used requires a higher transformer capacity than what is
provided, transformer will malfunction and possibly overload.
TRANSFORMER CAPACITY TABLE
TRANSFORMER NAME
Standard EZ (36 watts)
EZ Max (60 watts)
EZ MaxC (100 watts)
EZ Max200 (200 watts)
One LED Sot Spotlight draws 200mA.
One LED Sot Flood light draws 200mA.
Meaning, 5 sot lights draw 1,000mA, or 1 Amp.
» ALWAYS check local codes before beginning your project.
» USE DEKOR® TRANSFORMERS ONLY. Using any other type of
transformer voids the warranty.
OUTPUT
CURRENT
2.5 AMPS
5.0 AMPS
8.3 AMPS
16.6 AMPS
LED QUANTITY CAPACITY
9
2
20’
Transconnect
Cable
12
24
48
60
7. Once location is determined, mark
where holes will be drilled.
Use the 1/2” forstner bit (included)
to drill a 1/2” hole for the
STANDARD
standard mount.
MOUNT
8. If a FLUSH mount is desired, use a 5/8” forstner
bit (not included) and drill a counter sink hole
1/8” deep, then use the 1/2” forstner bit to
completely drill though the material.
9. When all holes are drilled, connect the
20’ transconnect cable to closest accent light in
once to power connected.
10.
DO NOT USE A HAMMER.
Using a hammer to insert the light will damage
lens and/or LED.
Connect next sot light using Plug-N-Play multi-port or T-Splitter.
Each adjoining light should illuminate once powered.
12. Repeat steps above for each additional light.
OPTIONAL
FLUSH MOUNT
1/2” Forstner
8
5/8” Forstner
To T-Splitter
10
NOTE: Construction methods are constantly changing. For the most up-to-date installation instructions visit: www.DEKORLIGHTING.com
Have Questions? Call 1–800-258-0344
Loading...