de Jong Duke Siro Touch 300HC, Siro Touch 1400, Siro Touch 900, Siro Touch 800, Siro Touch 300 User Manual
Coffee Machine
Siro Touch 2700 series
CoEx brewer - Freshbrew
User Manual
Picture: SiroTouch 2700 series
Filename:
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 2 of 32
Disclaimer Manufacturer:
Although this user manual has been put together with the utmost care, J.M. de Jong Duke
automatenfabriek b.v. accepts no liability for inaccuracies or omissions. No liability is
accepted for the consequences arising from operation of the equipment in accordance with
the information contained in these instructions.
J.M. de Jong Duke automatenfabriek b.v. reserves the right to alter specifications at any
time and without prior notification to the purchaser
All rights reserved
Copyright:
J.M. de Jong Duke automatenfabriek b.v. © 2011
The contents of this manual are copyrighted. Texts, images, and source files may only be
used for professional purposes.
No part of this guide may be reused, modified, or published without the prior written
permission of the manufacturer.
Printing pages is allowed only for professional use.
Manufacturer:
De Jong DUKE
+31 (0) 184 496767
Postbus 190
+31 (0) 184 416059
3360 AD SLIEDRECHT
www.dejongduke.com
The Netherlands
support@dejongduke.nl
De Jong DUKE North America
+1 734 403 1708
12680 Delta Street
+1 734 403 1712
Taylor, MI, 48180
www.dejongduke.com
U.S.A.
support@dejongduke.com
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 3 of 32
The machine supplier/ dealer is:
Company name:
Address:
Area code – City:
Country:
Telephone:
Fax:
Internet:
e-mail:
For service and support, always contact the dealer / supplier of the machine by using the
telephone service number below.
Tel. Service Number:
Preface:
●
Carefully read this instruction manual before you operate the machine.
●
Keep this manual in a safe place for possible later reference.
●
The manual cannot be regarded as a replacement for the training and instruction, but
must be seen as an addition to the training, and as a reference work.
●
This user’s manual is valid for the machine supplied by the manufacturer, including the
options installed by the manufacturer. The manufacturer accepts no liability for any
damage resulting from incorrect or improper use of the machine, or resulting from
modifications that have not been authorized by the manufacturer.
●
This manual gives instructions on the operation and maintenance of the machine.
Moreover, it gives solutions to simple malfunctions that may occur. The instructions in
some paragraphs are meant only for persons who are trained in the operation and
maintenance of the machine.
●
Besides this manual, a technical manual is also available.
This technical manual gives directions for solving machine malfunctions and repairing
the machine.
●
For instructions on the installation of the machine, a separate installation manual is
available.
●
Always use original parts from the manufacturer when the machine needs to be
repaired.
●
Only properly trained personnel may carry out repairs, install the machines, or transport
the machines.
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 4 of 32
Index:
Disclaimer Manufacturer: ......................................................................................... 2
Copyright: ............................................................................................................. 2
Manufacturer: ........................................................................................................ 2
The machine supplier/ dealer is: ............................................................................... 3
Preface: ................................................................................................................ 3
Index: ................................................................................................................... 4
1. Safety ............................................................................................................. 5
Safety and Risk levels: .................................................................................. 5
1.1
Safety and Warnings ..................................................................................... 6
1.2
Standards and norms: ................................................................................... 7
1.3
2. Description of the machine: ............................................................................... 8
2.1 General: ...................................................................................................... 8
2.2 The front of the machine: ............................................................................... 8
2.3 Overview of the machine interior: ................................................................... 9
2.4 Type plate: .................................................................................................. 10
2.5 Technical specifications: ................................................................................ 11
3. Before use: .................................................................................................... 12
3.1 Installation: ................................................................................................. 12
3.2 Operation site:............................................................................................. 12
3.3 Putting the machine out of order:................................................................... 12
3.4 Measure of cup and jug heights: .................................................................... 13
4. Operation:...................................................................................................... 14
4.1 Operating the machine in free vend mode: ...................................................... 14
4.2 Operating the machine in pay mode: .............................................................. 14
4.3 Jug dispensing: ............................................................................................ 15
5. Maintenance and filling: ................................................................................... 16
5.1 Daily maintenance: ...................................................................................... 16
5.2 Weekly maintenance: ................................................................................... 17
5.3 Monthly maintenance: .................................................................................. 18
Cleaning the canister with water: .......................................................................... 18
Cleaning the brewer with water: ........................................................................... 18
5.1 Place safety key: .......................................................................................... 19
5.2 Cleaning cycle for CoEx brewer: ..................................................................... 20
5.3 Fill canisters: ............................................................................................... 21
5.4 Removal of the brewer: ................................................................................ 23
5.5 Install the brewer: ....................................................................................... 24
5.6 Disassembling the mixing system: ................................................................. 25
5.7 Assembling the mixing system: ..................................................................... 27
6. Failure and Error messages: ............................................................................. 29
Document control: ................................................................................................. 30
Notes: .................................................................................................................. 31
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 5 of 32
1. Safety
Safety and Risk levels:
1.1
Four safety and risk levels are used in this manual.
The risk levels and explanations are described below.
Danger:
To warn persons / readers about the possibility of
serious or fatal injury to themselves or others.
Warning:
To warn persons / readers about the possibility of
minor injury to themselves or others.
Caution:
To warn persons / readers about possible damage to
equipment or data or about potential problems in the
outcome of what they are doing.
Note:
To emphasize points or remind persons / readers of
something, or to indicate minor problems in the
outcome of what they are doing.
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 6 of 32
Safety and Warnings
1.2
The general safety warnings apply to the entire document.
The risk level associated with the explanation below.
Danger:
Do not use water in or near the machine unless the
instructions contain explicit directions to the
contrary.
Risk of electrocution when water comes in contact with
internal electrical parts.
HOT water! The water system (boiler, pipes, etc.)
may contain hot water
Risk of burning when HOT water comes in contact with a
person that can cause a scalding injury.
Warning:
Do not shake the machine while in use.
Risk that machine can tip and fall.
Risk of electrocution when water comes in contact with
internal electrical parts.
Do not lean on the door when open.
Risk that machine can tip and fall.
Caution:
Do not use aggressive cleaning products or
abrasives to clean (parts of) the machine.
Do not use a damaged machine.
Please contact your supplier
If a fault occurs, disconnect the machine from the
electrical and water supplies.
Please contact your supplier immediately.
Note:
Keep this manual near the machine, so the manual is
immediately available.
Use the machine only in areas where trained personnel can
monitor the operation.
Damaged water connection tubes may only be repaired by
trained personnel.
The water connection must conform to local regulations.
Do not use an extension cord.
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 7 of 32
Standards and norms:
1.3
The machine is build according to CE norms
The machine complies with the following standards:
●
Machine standard: 89/392/EEG
●
EMC standard: 89/336/EEG,
The machine complies with the following norms:
●
EN 292: safety of machines.
●
UL and cUL 751: norm vending machines (only if sign is on type plate)
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 8 of 32
2. Description of the machine:
2.1 General:
Warning:
Hot drinks are dispensed from the machine
Take care to avoid scalding yourself.
If cups or jugs are not correctly placed
The machine will spill hot liquid down the front.
This can cause serious burns.
The outlet of the machine may occasionally drip hot
liquid even when the machine is not in use.
When the hot water comes in contact with a person, this
can lead to serious burns.
The water system (boiler, tubes etc.) contains hot
water with a temperature close to the boiling point
<100 °C.
When the hot water comes in contact with a person, this
can lead to serious burns.
The machine is a compact semi-automatic machine for the preparation and vending of hot
drinks. Your supplier can adjust the taste and sizes of the drinks.
2.2 The front of the machine:
The machine can be operated using the operating panel on the door. By pushing one of the
selection buttons on the screen, a product choice can be made.
Before you dispense a beverage, a cup must be placed under the tap.
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 9 of 32
2.3 Overview of the machine interior:
Lid
Base cabinet
Bean canister
Instant canisters
Bean canister
lock
Grinder
Canister outlets
Mixing bowl
Mains Power
switch
Mixers
CoEx Brewer
Tea brewer
Dispensing
nozzles
Driptray under
CoEx brewer
Waste bucket
Drip tray
Note: The beans canister is not applicable for this model.
User Manual
SiroTouch 2700 series
SiroTouch-2700_9CEC_UserManual_5DUCEH20b_EN_v01-01.docx
Page 10 of 32
2.4 Type plate:
The type plate is mounted on the inside of the machine, at the top left.
The following data is mentioned on the type plate:
●
Name of manufacturer
●
Serial number
●
Type/model specification
●
Model specification
●
Mains power specification
●
Production date
●
Water connection specification
Remark: data on type plate differs based on model.
Loading...