Deister Electronic RDL150 User Manual

V17/08/05
RDL150 RS485
RS232
Wiring & Installation
Instructions
deister electronic GmbH 30890 Barsinghausen Germany 2
RDL150 RS485/RS232
V19/07/04
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of deister electronic GmbH.
deister electronic GmbH reserves the right to make changes to any and all parts of this docu­mentation without obligation to notify any person or entity of such changes.
August 2005 PF/HM/BF
deister electronic GmbH Hermann-Bahlsen-Str. 11 30890 Barsinghausen Germany Telefon: +49 (0) 51 05 - 51 61 11 Telefax: +49 (0) 51 05 - 51 62 17 E-Mail: info@deister-gmbh.de Web: www.deister.com
deister electronic GmbH 30890 Barsinghausen Germany
3
V19/07/04
RDL150 RS485/RS232
Contents
1 Basic Information..................................................................4
1.1 Introduction...................................................................................................... 4
1.2 Applications..................................................................................................... 4
2 Technical Data...................................................................... 5
3 Connection RDL150 with RS485............................................ 6
3.1 Connection RDL 150 with RS232........................................................................6
4 RS485 Interface..................................................................... 7
5 Mechanical Dimensions........................................................ 8
5.1 Rear view (opened housing)............................................................................... 9
5.2 LED explanation.............................................................................................. 10
5.3 Easy Trim Function...........................................................................................11
6 Installation Instructions...................................................... 12
6.1 Possible interference sources............................................................................ 12
6.2 Mounting considerations.................................................................................. 13
7 Upgrading Firmware.......................................................... 14
8 Regulatory Notices / Zulassungen..................................... 16
8.1 Europe/Europa............................................................................................... 16
8.1 FCC Digital Device Limitations........................................................................ 16
deister electronic GmbH 30890 Barsinghausen Germany 4
RDL150 RS485/RS232
V19/07/04
1 Basic information
1.1 Introduction
The interface options enable this stationary reader with integrated controller to be connected directly to a PC, processor or controller.
1.2 Applications
The reader was especially designed for applications where it is necessary to read and write several transponders at the same time from different distances.
• Control of incoming goods and dispatch
• Event ticketing
• Operating data collection
• Lending processes
• Paperless operations such as electronic delivery papers, invoices, receipts
deister electronic GmbH 30890 Barsinghausen Germany
5
V19/07/04
RDL150 RS485/RS232
2 Technical Data
Dimensions: 298 x 298 x 33,5 mm
Material: ASA plastic, black
Protection type: IP 65 (IEC 529)
Operating temperature: -20 °C...+70 °C
Storage temperature: -40 °C...+70 °C
Supply voltage: +8...30 V/DC
Power consumption: approx. 2 Watt
Electrical protection: Reverse polarity diode protection on supply power lines.
High speed transient suppressor diode protection on data lines, trigger input and switching output
Electrical connection: 1m shielded cable open wire, shield is not internally
connected
Operating frequency: 13.56 MHz
Read/write distance: up to 400 mm (depending on transponder type and the
local environment)
Data transmission speed: ca. 26 kBit/s
Reading/writing speed: < 50 ms per block
Transponder types: ISO 15693, I•CODE
Trigger input: +8...36 V/DC
Switched output: +6...32 V/DC; I< 500 mA
+32...48 V/DC; I< 300 mA
Interface: RS 232, opt. RS 485
data rate: 9600 baud, 19200 baud, 38400 baud
Anti-collision: recognition up to 30 transponders in the reading field
Color of cable
Signal
Function
White
V_IN
Power Supply +8...30 VDC Brown
GND_IN
Power Supply 0 VDC
Red
VDD_SA
External power supply for galvanically isolated Output (+6...48 VDC) Purple
SA
Galvanically isolated Output Black
GND_SA
External power supply for galvanically isolated Output (0 VDC)
Pink
VDD_SE
Galvanically isolated Input (+5...36 VDC) Blue
GND_SE
Galvanically isolated Input (0 VDC)
Grey
RS485_A
Noninverting Receiver Input and Driver Output Green
RS485_B
Inverting Receiver Input and Driver Output
Yellow
GND
(internal connected with GND_IN)
3 Connection RDL150 with RS485
3.1 Connection RDL150 with RS232
deister electronic GmbH 30890 Barsinghausen Germany 6
RDL150 RS485/RS232
V19/07/04
Color of cable
Signal
Function
White
V_IN
Power Supply +8...30 VDC Brown
GND_IN
Power Supply 0 VDC
Red
VDD_SA
External power supply for galvanically isolated Output (+6...48 VDC) Purple
SA
Galvanically isolated Output Black
GND_SA
External power supply for galvanically isolated Output (0 VDC)
Pink
VDD_SE
Galvanically isolated Input (+5...36 VDC) Blue
GND_SE
Galvanically isolated Input (0 VDC)
Grey
RS232_RXD
RS232 Reader Receiving Signal Green
RS232_TXD
RS232 Reader Transmitting Signal Yellow
RS232_GND
RS232 GND (internal connected with GND_IN)
Loading...
+ 14 hidden pages