GE-Interlogix-CASI
Model-240 Proximity Reader
Description
The GE-Interlogix-CASI Model 240 access control badge reader
is an ISO standard compliant, proximity technology badge
reader. The Model 240 reader will read ISO-14443 and ISO15693 badges and key tags. The reader’s aesthetically pleasing
contemporary design and light gray housing will complement
any decor.
Features:
• Compatible with Micro/5 2RP and 8RP controllers (not M/5-2SRP)
• Compatible with all Micro/PX(N)-2000 controllers
• Sealed electronics, suitable for outdoor installation
• Tamper switch protected
• Reads ISO-14443 and ISO-15693 access control badges and tags
• Reads badge or tag serial number, no memory sector records required
• User interface: 3-LEDs and beeper
• Fast field maintenance, field wiring plug
• Up to 4” read range (badge type and installation conditions dependent)
• 4-state input supervision of door contact & REX switch: opened, closed, cut, short
• Reader supervision: continuously monitored by the microcontroller
9/17/2002
Specifications
• Mount: on single width USA or European style electrical box or directly on wall
• Material: ASA plastic housing; polyurethane encapsulated electronics
• Housing dimensions: 3.34 x 4.40 x 0.96 inch: (85 x 112 x 24.2 mm)
• Temperature range: -13 to 140 °F /-25 to +70 °C
• Power supply: 8VDC to.30 VDC @ <100 mA
• Electrical protection: Reverse polarity diode protection on power lines
• Data Lines: high-speed transient voltage suppressor diodes
• Protection type: IP 65 (IEC 529). Suitable for outdoor installation
• Frequency: 13.56 MHz
• Approvals: FCC,CE-EN 300 330
• Read distance: up to 2 inches ISO-14443 or up to 4 inches ISO-15693
• Microcontroller firmware versions: Picture Perfect 1.7 or greater recommended
• Interface: Supervised F/2F
• Electrical connection: 12 position plug-in strip connector with screw terminals
• Beeper: controlled by SF2F protocol
• Red LED: controlled by SF2F protocol
• Green LED: controlled by SF2F protocol
• Yellow LED: internal controlled
• RS-485 for reader firmware maintenance and conf ig urat ion
• Casi pn: 430177001
Page 1 of 4
GE-Interlogix-CASI
Model-240 Proximity Reader
FCC Cautionary Comment
Modifications to the Model-240 reader not expressly
approved by GE-Interlogix may void the FCC approval.
Model 240 Back plate
9/17/2002
Note: Mounting holes fit a standard US single width electrical box and standard
European electrical box hole patterns.
Installation
Page 2 of 4