DEI Sales Polk Audio SB5000IHTTX, WF5000IHTRX User Manual

Date Drawing # File Name Scale Drawn By Color Emboss Ht. Deboss Depth Finish Process Notes

Artwork

7 December 2011 HBP2503 SB5000IHT_3LangMN2503.qxd Full Size KLB Prints 100% Black n/a n/a n/a Offset Lithography Flat size: 11" x 17" horizontal Fold size: 8.5" x 11" TITLEBLOCK DOES NOT PRINT Digital file

Approvals Signature Date

Project Manager Product Line Manager Mechanical Designer System Engineer Electrical Engineer Safety & Regulations Quality Assurance Creative Director Comments

Revision Date Description



ENGLISH

MPORTANT SAFETY INSTRUCTIONS

his product was designed and manufactured tomeet strict quality and safety standards.

here are, however,some installation and operation precautions which you should

T be particularly aware of.

. Read Instructions. All the safety and operating instructions should

be read before the system is operated.

2. Retain Instructions. The safety and operating instructions should be retained for future reference.

. Heed Warnings. All warnings on the appliances and in the operating

nstructions should be adhered to.

. Follow Instructions. All operating and use instructions should be followed.

5. Cleaning. Unplug the appliance from wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

. Attachments. Do not use attachments not recommended by the product

anufacturer as they may cause hazards.

. Water and Moisture. Do not use these appliances near water‹for example,

near a bath tub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories. Do not place these appliances on an unstable cart, stand, tripod, bracket, or table. The audio/video products may fall, causing serious injury to a child or adult, and serious damage to the products. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliances. Any mounting of the appliances should follow the manufacturer’s instructions, and should use mounting

ccessories recommended by the manufacturer.

9. Ventilation. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliances and to protect them from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the products on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. Power Sources. This product should be operated only from the type of power source indicated on the marking labels. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

11. Grounding or Polarization. This product is equipped with polarized alternating-current line plugs (plugs having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection. Power-supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against it, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliances.

13. Lightning. For added protection for this audio/video product during a lightning storm, or when it is left un-attended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

14. Power Lines. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry. Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on this audio/video product.

17. Servicing. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service. Unplug this product from wall outlets and refer servicing to qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged. b.If liquid has been spilled, or objects have fallen into the product. c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

nstructions, as an improper adjustment of other controls may result

n damage and will often require extensive work by a qualified technician

o restore the product to its normal operation.

.If the product has been dropped or the cabinet has been damaged.

f.When the product exhibits a distinct change in performance this indicates

a need for service.

9. Replacement Parts. When replacement parts are required, be sure the service

echnician has used replacement parts specified by the manufacturer or that

he parts have the same characteristics as the original part. Unauthorized

t substitutions may result in fire, electric shock or other hazards.

CAUTION: Danger of EXPLOSION if battery is incorrectly replaced. Replace only with the same or equivalent type. (CR2025)

ARNING: Do not expose batteries or battery pack to excessive

eat such as sunshine, fire or the like.

20. Safety Check. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the products are in proper operating condition.

1. Carts and Stands. The appliances should be used only with a cart or stand

that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Use caution when moving the cart/apparatus combination to avoid

njury from tip-over.

22. This product is not intended for use outdoors.

The CAUTION marks shown here are located on the back of your SurroundBar

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, insert fully.

CAUTION: No naked flame sources, such as candles, should be placed on the apparatus.

Class B Emissions Limits

This Class B digital apparatus meets all requirements of the Canadian Interference—Causing Equipment Regulations.

Operation

Operation is subject to the following two conditions:

1) This device may not cause interference, and

2) This device must accept any interference, including interference that may cause undesired operation of the device.

Product Disposal

Certain international, national and/or local laws and/or regulations may apply regarding the disposal of this product. For further detailed information, please contact the retailer where you purchased this product or the Polk Audio Importer/Distributor in your country. A listing of Polk Audio Importer/ Distributors can be found on the Polk Audio website www.polkaudio.com or by contacting Polk Audio at: 5601 Metro Drive, Baltimore, Maryland 21215, USA. Phone: +1-410-358-3600; in California: 1-800-377-7655.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Speaker System

2 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

PLEASE TAKE INVENTORY

SOURCE MUTELEARN

Remote Control

(Battery Included)

1/8" to 1/8" Analog Cable

1/8" to RCA Adapter

20V Power Supply

Please check to ensure you have everything in your

Polk

SurroundBar®5000 Instant Home Theater®(IHT)

carton. Inside, you should find:

SurroundBar Subwoofer Remote Control (Battery Included) Subwoofer Power Cord 20V Power Supply 6' Digital (Optical) Cable

/8" to 1/8" analog cable

1 1/8" to RCA adapter Quick Start Guide Owner’s Manual Online Registration Card

Important Note: If anything is missing or damaged, or if your Polk Audio SurroundBar 5000 IHT fails to operate, please notify your dealer immediately. We recommend keeping your original carton and packing materials in case you need to ship the unit in the future.

ABOUT YOUR SURROUNDBAR 5000 IHT

Thank you for choosing the SurroundBar 5000 IHT from Polk Audio. You’re about to discover how the legendary Polk Audio sound makes watching TV and movies so much more exciting. Using a single bar loudspeaker and a wireless subwoofer, the SurroundBar 5000 IHT produces a wide soundstage and rich, full sound. Polk spectacular performance and convenience. And there’s even more about the SurroundBar 5000 IHT you’ll enjoy:

Bluetooth

wireless technology with aptX®delivers CD-quality sound from your smartphone, tablet or other compatible device.

Digital Logic®offers

INSIDE YOUR SURROUNDBAR 5000 IHT CARTON:

Sleek design, shallow 2 1/4" depth blends seamlessly with today’s contemporary TVs.

SmartBar™ enables your SurroundBar to learn your TV’s original IR remote control. (Backup remote included.)

Thrill to a rich, enveloping listening experience, far beyond what any built-in TV speakers can produce, thanks to Polk Audio’s proprietary SDA and Polk Digital Logic technologies.

Dual tuned-port enclosure creates optimum blending of drivers and subwoofer whether the bar is wall- or shelf-mounted.

Compact wireless subwoofer can be placed anywhere in the room within 50' of the SurroundBar 5000.

Polk Audio’s signature sound, warm and full, with clarity and detail, turns games, movies and TV into an exciting viewing experience.

Dolby

Digital decoding.

Energy Star

certified.

Surround

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 3

BAR CONTROLS

789

SOURCE MUTELEARN

SOURCE LED GUIDE

RONT

BACK

SOURCE 1

SOURCE 2

SOURCE 3

Bluetooth

2.2A

20V

132

SOURCE

SYNC

OWER

OFF

44W

Front Panel:

1. Learn—Puts the bar into “learning mode” so

you can program it to respond to commands from your existing remote control.

2. Source—Changes which input source

you are listening to.

Source 1: digital/optical Source 2: analog Source 3: analog Source 4 Bluetooth ( ): Bluetooth

technology (See “PAIR AND CONNECT YOUR BLUETOOTH DEVICE WITH THE SURROUNDBAR” on page 8.)

LED—Blue light indicates which Source has been selected (see Source LED Guide above). Source 1 LED will light green if Dolby Digital signal is being decoded.

3. Power ( )—Turns on the bar or puts

it in standby mode.

LED—A light that shines green, orange or red to indicate operating status.

4. Mute—Mutes and unmutes the sound

coming from the SurroundBar 5000 IHT, indicated by green slow flash.

5. Volume Up and Down ( / )—Adjusts

the volume of the SurroundBar 5000 IHT.

Back Panel:

6. Power Switch—Turns the bar on or off,

but you can leave it on all the time.

7. Power Connection—The bar power supply connects here.

8. Audio Inputs (Source 1, 2, or 3)—Where you connect

your TV (or other sources) to the SurroundBar 5000. Use the 6' optical cable (Source 1) provided or 1/8" analog cable (Source 2 or 3) provided.

9. SYNC—The SYNC button ensures the subwoofer

and bar are communicating. (See “SYNCING THE BAR AND WIRELESS SUBWOOFER” on page 7.)

BAR POWER ( ) LED

Normal Operating Mode:

Green Steady—Power is on; all is well.

Red Steady—The bar is in standby mode.

wireless

Green Two Blinks—A remote control or keypad operation signal is received successfully.

Green Slow Blinking—System is muted.

Green Fast Blinking (After pressing volume up

button)—You have reached the maximum volume.

Green Fast Blinking (At power up)—The bar and subwoofer have established a wireless connection.

BAR POWER ( ) LED

Learning Mode: (See page 10 for instructions.)

Orange Blinking—The bar is in learning mode.

Orange Steady—The bar is in learning mode

and a function has been selected.

Green Blinking—The bar has successfully learned a remote control command.

Red Blinking—The bar has failed to learn a remote control command.

Red and Orange Blinking—Learned IR codes have been successfully erased.

SOURCE LED

Green Blinking—Dolby Digital source

recognized (Source 1 only).

Green Steady—Dolby Digital source received and is being decoded (Source 1 only).

Blue Steady—PCM or analog source received.

4 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

REMOTE CONTROL

1. Power ( )—Turns on the bar or puts

it in standby mode.

2. Mute—Mutes and unmutes the sound

coming from the SurroundBar 5000 IHT.

3. Source 1, 2, 3 or —Changes which

input source you are listening to.

4. Volume Up and Down ( + / –)—Adjusts

the master volume of the SurroundBar 5000 IHT system.

5. SUB Volume Up and Down ( + / –)

Adjusts the volume of the subwoofer.

SUBWOOFER CONTROLS

1. Power Switch—Turns the wireless subwoofer on

or off, but you can leave it on all the time if you wish.

2. Power Connection—The subwoofer power

cord connects here.

THE STATUS LIGHT ON THE WIRELESS SUBWOOFER INDICATES THE FOLLOWING:

When light shines green:

a. Green Steady—The bar and subwoofer are connected.

b. Green Slow Blinking—The subwoofer is searching

for the bar.

c. Green Fast Blinking—The subwoofer is in the

process of connecting with the bar.

When light shines red:

a. Red Steady—The subwoofer is in standby mode.

b. Red Blinking—The subwoofer is in protection mode.

Specifications

Dimensions

SurroundBar 3 3/4" H x 31" W x 2 1/4" D

(9.53 cm x 78.74 cm x 5.72 cm)

Subwoofer 10" H x 10 1/4" W x 10 3/4" D

(25.4 cm x 26.04 cm x 27.31 cm)

Weight

SurroundBar 5 lbs (2.3 kg) Subwoofer 7 lbs (3.2 kg)

Power Requirements

SurroundBar 20V, 2.2 A Subwoofer 100V - 240V~50Hz - 60Hz, 50W

Model SurroundBar 5000 Instant Home Theater

Remote Battery CR2025

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 5

S O

U R

C E

U T

L E

A R

S O

U R

C E

U T

L E

A R

Shelf mounted bar sits in front of TV

WHERE TO LOCATE YOUR BAR FOR THE BEST SOUND

It’s easy. The bar comes with rubber feet already attached, so it will sit securely on any flat surface. Just center the bar under your TV screen. If your TV is housed in a media center, you can place the bar above the TV.

If your TV is wall mounted, the bar can mount right beneath it. The bar has built-in keyhole slots that make it easy.

Wall mounted bar

Overall Dimensions

1. 3 3/4" H (9.53 cm)

2. 31" (78.74 cm)

Note: The rubber feet are detachable and may be removed

entirely (for wall-mounting the bar) or moved along the bottom surface of the bar, depending upon your installation.

WHERE TO LOCATE YOUR SUBWOOFER FOR THE BEST SOUND

Your wireless subwoofer is really easy to place and can go just about anywhere in the room. Plus you don’t have to worry about connecting wires, because the only wire you have to plug in is the power cord. And that’s it.

Here’s a little trick: If you place your subwoofer in a corner of your room, it will reinforce the subwoofer’s output, making it sound louder.

Keyhole Slots

3. 19 13/16" W (50.32 cm)

Top of Bar to Keyhole Slots

4. 1 5/8" (4.13 cm)

Note: If you wall mount your SurroundBar, ensure that your wall

anchors secure properly into the wall and that they can bear the weight of the SurroundBar, which is 5 lbs (2.3 kg).

6 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

HOW TO CONNECT YOUR BAR

2.05A

20V

132

SOURCE

SYNC

OWER

35W

ANALOG

AUDIO OUTPUT

DIGITAL OPTICAL

AUDIO OUTPUT

TV or Cable/Sat Box

SurroundBar 5000

HOW TO CONNECT YOUR SUBWOOFER

This is really easy too. You likely have many sources for your audio signal: your TV, your DVD player, or a cable/satellite box. The bar is able to accept audio from up to three different sources. The simplest approach is to connect the optical audio output of your TV to the optical input on the back of the bar. This method will provide the highest quality audio regardless of whether you are watching TV or watching your favorite DVD.

If your TV does not have an optical output, you can use the optical output from your DVD player or your cable/satellite box to connect

o the optical input on the bar. Then simply use the other bar

t inputs for your other audio sources.

Your subwoofer receives a wireless audio signal from the bar, so all you need to do is plug in the power cord and make sure the main power switch is ON.

SYNCING THE BAR AND WIRELESS SUBWOOFER

The SurroundBar 5000 bar and wireless subwoofer come from the factory preset to work together. If the wireless subwoofer stops receiving an audio signal, follow these instructions to re-establish the connection.

1. Turn off the subwoofer’s AC Mains switch.

2. Press and hold the SYNC button on the back

of the bar for three (3) seconds.

3. The LED on the back of the bar will blink,

indicating that the bar and the subwoofer are ready to be connected.

4. Turn on the subwoofer’s AC Mains switch. When

the subwoofer LED turns solid green the bar and subwoofer are connected and ready to use.

Note: Remove the protective cap prior to inserting cable.

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 7

BLUETOOTH®WIRELESS TECHNOLOGY

SOURCELEARN

How to disconnect with a Bluetooth device:

To use your Bluetooth wireless technology device with the SurroundBar 5000, you must first pair your device with your SurroundBar.

Pairing creates the ability of your Bluetooth device to connect with your SurroundBar wirelessly. Pairing is like a handshake between your Bluetooth device and your SurroundBar 5000 in which they meet and exchange information.

You only have to pair your SurroundBar with your Bluetooth device one time for this exchange of information to take place. After that you simply select the “polk sb5000” from your device list to make the connection to your SurroundBar.

The SurroundBar can hold 8 Bluetooth devices in its memory.

If enough devices pair after yours, your device could be dropped from the memory list.

Pair and connect your Bluetooth device with the SurroundBar:

1. Make sure your Bluetooth device and SurroundBar 5000

are both powered on.

2. Activate the Bluetooth function on your Bluetooth source

device. See your device’s manual for instructions.

3. Press the Bluetooth source button from the SurroundBar

remote or press the SOURCE button on the SurroundBar until the Bluetooth source is selected.

1. Press and release the Remote Control Bluetooth button, or

2. Press and release the Bluetooth Source button, or

3. Turn off or disconnect the Bluetooth feature

on your Bluetooth device.

The SurroundBar will emit a short tone and the Bluetooth source symbol will begin slowly pulsing when disconnected.

Automatic connection:

Any time you want to connect and play music through the SurroundBar after the devices have been paired, do the following:

1. Turn your device’s Bluetooth function on.

2. Enter Bluetooth source by pressing the Bluetooth source

button from the remote or press the SOURCE button on the SurroundBar until the Bluetooth source is selected.

3. After a short delay, the two devices will automatically

connect and you will hear a short tone and the Bluetooth source symbol will now be steady blue.

Note: By default, the last connected Bluetooth device will automatically connect if available.

Pair and/or connect to a device when in Bluetooth source, but disconnected:

The Bluetooth symbol will illuminate, then begin slowly pulsing as it looks for the paired device.

4. Your SurroundBar will now be displayed on your source

device and available to pair and/or connect. Select the “polk sb5000” on your device to initiate the connection process.

5. After a short delay (5 seconds), the two devices should

now be connected. You should hear a short tone and the Bluetooth source symbol will now be steady blue.

6. Play your music from your device!

Note: If your device asks for a passcode to pair to the

SurroundBar, enter “0000.”

1. Engage the Bluetooth function on your Bluetooth source

device. See your device’s manual for instructions.

a. The SurroundBar will be displayed on your source

device as available to pair and connect. Select the “polk sb5000” on your device to initiate the pairing and connection process.

After a short delay, the two devices should now be paired and connected. You should hear a short tone and the Bluetooth source symbol will now be steady blue.

How to disconnect:

Note: Anytime The SurroundBar exits SLEEP mode and is in

Bluetooth source, the SurroundBar will automatically connect to any paired Bluetooth device if the paired device’s Bluetooth feature is on.

8 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

HOW TO OPTIMIZE THE SOUND WHEN TV SPEAKERS ARE ON

You should hear sound from the bar. If you don’t, turn up the volume on the bar using its volume control buttons.

FINE TUNING YOUR SUBWOOFER VOLUME LEVEL

he next thing you’ll want to do is adjust the subwoofer

T to blend with your bar. This will ensure the system produces the best sound.

If your bar is connected to your TV, there’s a very good chance your TV speakers are also playing. It’s impossible to give specific instructions on how to turn off the speakers for every TV, but here’s a way to do it that covers many of the TVs out there.

1. On your TV remote control, find a “menu” or “setup” button.

2. Press this button. You should see an on-screen menu.

3. Next, look for an option to control audio functions

and select it.

The setting to turn off your TV’s internal speakers should be here.

If you can’t turn off your TV internal speakers, don’t worry. Your SurroundBar 5000 IHT will make your TV sound much better. To enjoy the best performance from your bar, you’ll want it to play louder than your TV. Use the following steps to adjust the volume balance between your TV and the bar:

1. If necessary, program your bar to respond to the volume

up and down control commands of your TV remote. (See “HOW TO SETUP A REMOTE CONTROL FOR YOUR SURROUNDBAR 5000 IHT” on page 10.)

2. Turn your TV volume all the way down using the control

buttons on your TV.

3. Then, using the volume keys on your bar, set the volume

to a normal listening level (do not use the remote control).

To set the subwoofer’s volume, play a variety of source material— some music, a movie sound track with great special effects, a movie chapter or a part of a concert in which people are speaking. Adjust the volume until what you hear sounds natural to you in your normal viewing location.

After you make these adjustments, your SurroundBar 5000 IHT should always be louder than your TV speakers. Then use the TV remote control to adjust the volume as you normally do.

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 9

LED

VOL

SOURCELEARN

MUTE

LED

Press and hold “LEARN” for 2 seconds, or until LED blinks orange, then release the “LEARN” button.

The SurroundBar is turned on and the LED is solid green. And you have sound coming from the bar.

Hold TV remote 1' - 2' from SurroundBar.

Press and release Volume Up “ .” LED turns solid orange.

Blinks orange

Solid orange

ED blinks with

each button press

LED

ED blinks green,

then turns solid green

Tap “Volume Up” button on your TV’s remote control 4

- 8 times, once per second. Tap, do not hold.

When the LED blinks green quickly for 3 seconds, the command has been learned. The LED will become solid green.

S O

U R

C E

M U

T E

L E

A R

1' - 2'

HOW TO SET UP A REMOTE CONTROL

OR YOUR SURROUNDBAR IHT

SMARTBAR™PROGRAMMING NOTE:

For your SurroundBar to respond to your remote control, you MUST FIRST program the bar to respond to your television’s original IR (Infra-Red) remote. An RF (Radio Frequency)

emote will not work. Other remotes (cable, satellite) will

work only after you have programmed the bar to respond to the TV’s IR remote.

Programming Instructions: Your SurroundBar IHT is currently programmed to respond to the remote control that is included with the product. However, we strongly recommend programming the SurroundBar to also respond to your existing remote control using the steps illustrated below. This will enable you to operate all of your components using a single remote control. While programming the SurroundBar, ignore

anything that may be displayed on the TV screen.

Example: To teach your bar the “Volume Up”

command of your remote control:

Verify command works.

Repeat steps 1-6 to program “Volume Down” ( ), Source, Mute and Power buttons ( ).

Note: If your bar fails to learn certain IR remote codes, the power

LED will blink red. Try erasing any previously programmed codes (see below) and carefully repeat steps 1-6 above.

Code Erasing Procedure: If you have programmed your SurroundBar IHT to respond to a remote control and you no longer want it to do so, erase the codes by pressing the LEARN key for about two seconds while the unit is in standby mode (power LED is red). You’ll know that previously learned codes have been successfully erased when the power LED blinks orange twice.

Note: This procedure removes ALL of your bar’s remote control programming. If you only need to change the programming for some of the bar buttons, follow the six steps in the sequence previously described to redo any previous programming.

The SurroundBar will continue to respond to the provided credit card remote control.

SUB VOLUME CONTROL ON THE BAR

While unit is on and LED is solid green.

1. Tap LEARN once, LED ( ) turns orange.

2. To adjust sub volume, tap up ( ) or down ( ).

10 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

3. To return to master volume, tap LEARN again,

LED ( ) turns green.

NOTE: Bass can also be adjusted with included remote control.

TROUBLESHOOTING

The bar does not power on.

Ensure you have plugged the power supply into a live wall outlet. Ensure that all components of the power supply are connected properly. Ensure the power supply is properly connected to the bar power input. Ensure the rear panel power switch is in the “ON” position.

The subwoofer does not power on.

Ensure the subwoofer is plugged into a live wall outlet. Ensure the rear panel power switch is in the “ON” position.

No sound from the bar.

Check that the TV or cable box is providing a signal. If necessary, check using an alternate source. Check that the bar is receiving power and is turned on. Turn up the volume of the bar. Check the input cables to make sure they are connected securely. Turn up the volume of your television or cable box. Check mute status: Is the bar status light slowly blinking green? If so, press the MUTE button on the bar.

No sound from the subwoofer.

See section “Subwoofer does not power on.” Turn up the subwoofer volume using the remote control. Is the subwoofer status indicator blinking green? If so, the bar and subwoofer’s wireless connection has been lost. Turn off both the bar and subwoofer. Then turn them back on to re-establish communication. If this does not fix the issue, refer to the section “SYNCING THE BAR AND WIRELESS SUBWOOFER,” on page 7.

The sound coming from the bar is distorted.

Try turning down the volume of your audio source, if possible. Audio processing (see FAQ’s on page 12)— there may be audio processing occurring prior to reaching the bar. Disable this processing.

Bass output is not loud enough.

Turn up the subwoofer’s volume using the remote control. Place the subwoofer closer to a corner of the room. Move subwoofer closer to viewing location within the room.

The bar won’t learn my remote control commands.

Carefully follow the programming instructions on the previous page of this manual. Hold the remote steady and 1-2 feet from the front of the bar. Quickly “tap” the button on your existing remote until the status LED blinks green.

Note: The bar learns almost all IR commands, but some IR protocols cannot be programmed.

The volume of my television speakers gets louder than my SurroundBar 5000 system over time.

Turn off your TV speakers per the instructions on page 9 of this manual. When the remote control volume button is held down, your television may change volume levels faster than the bar. Use the buttons on the bar to adjust the volume of the bar to the correct balance with the TV speakers.

The subwoofer’s output is intermittent, or sounds weak or is distorted.

The wireless subwoofer could be too far away from the bar to receive a sufficiently strong signal. Try moving the subwoofer closer.

My Bluetooth device and bar will not disconnect.

Some Bluetooth devices will constantly attempt to connect to a paired device, so you must turn off the Bluetooth function on your device to allow other devices to connect to the bar.

The included remote control won’t work.

Ensure the battery’s protective plastic tab has been removed. Replace the battery (CR2025).

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 11

FAQ’S (FREQUENTLY ASKED QUESTIONS)

My TV does not have an optical output. How do I connect my audio?

You have several options for connecting your audio:

Use the optical output of your source unit (cable/satellite box, DVD player, etc.) and connect directly to the SurroundBar 5000 using the supplied optical cable. Use the 1/8" (3.5mm) analog / headphone output of your TV (if available) and connect directly to the SurroundBar 5000 using the supplied 1/8" (3.5mm) to 1/8" (3.5mm) analog cable.

se the RCA audio outputs (white/red pair) on your TV

U (if available) and connect directly to the SurroundBar 5000 using the supplied 1/8" (3.5mm) to 1/8" (3.5mm) analog cable and 1/8" (3.5mm) to RCA adapter.

What if my provided optical cable is too short?

We did our best to provide a cable of adequate length; however, there might be a few setup instances in which the cable may be too short. If that is your situation, your local electronics store will have cables that meet your required length.

My audio sounds strange and distorted.

Your SurroundBar 5000 requires a clean, unaltered stereo or Dolby Digital signal for proper audio performance. If the sound from your SurroundBar 5000 is strange or distorted, then check the audio menus of whatever source(s) are connected to your SurroundBar 5000 and make sure any audio processing is turned off.

Why can’t I successfully program the SurroundBar 5000 to respond to my remote control?

My SurroundBar 5000 was responding to commands, but now it isn’t. What should I do?

In this rare event, simply turn off the power (switch located on the back of the bar), wait a few seconds, and then turn the power back on. This should restore control.

How do I erase previously learned remote control commands?

If you have programmed your SurroundBar 5000 to respond to a remote control and you no longer want it to do so, then you can erase the codes by pressing the LEARN key for about two seconds while the unit is in standby mode (power LED is red). The SurroundBar 5000 will continue to respond to the provided credit card remote control.

Can I adjust the subwoofer level control from the bar keypad if I cannot locate the provided remote control?

Yes. You can control the subwoofer volume from the bar keypad by tapping the LEARN key prior to using the volume buttons. When the power LED shines orange, the volume keys ( / ) control the subwoofer volume. Tap the LEARN key again when you are done with the adjustment.

To contact Customer Service/Technical Support:

If you have a question or comment, please feel free to call us or email us. In North America and Canada, call Polk Audio Customer Service: 800-377-7655 (M-F 9-5:30 EST) or via email polkcs@polkaudio.com. Outside the US, call 410-358-3600.

There are many remote control formats, and we have done our best to make the SurroundBar 5000 compatible with the most popular brands. However, there are likely some cases in which the bar will not be able to learn your remote codes. In this case, please use the remote control provided with the SurroundBar 5000 product or try a different universal remote control.

Note: RF only remotes will not work with this system.

How do I control the SurroundBar 5000?

There are three ways to control your SurroundBar 5000:

Use the touch-sensitive buttons on the front of the bar. Use the provided remote control. Program the SurroundBar 5000 to respond to your existing remote (see included instructions).

12 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

A Note Regarding Wireless Performance:

ike all wireless devices, your SurroundBar 5000 IHT may be susceptible

o RF interference from such sources as microwave ovens, WiFi computer

ystems, video game systems, cordless telephones, blue tooth systems,

s baby monitors and other devices. In particular, any devices operating in the

2.4GHz band may cause intermittent wireless connections between the SurroundBar 5000 speaker and the subwoofer. It is also possible that your

urroundBar 5000 IHT System may affect other wireless systems. For the

ost part, you can avoid wireless performance problems by physically

eparating these devices from your SurroundBar 5000 IHT System.

aintaining a distance of several feet or more between your SurroundBar 5000

M IHT speaker and any wireless device should prevent any mutual interference effects. If you do notice any subwoofer signal dropouts take care to identify the root cause (most commonly having other wireless devices too close)

nd resolve accordingly. Any interference effects from a microwave oven

a will cease once the oven stops operating and may be resolved on a long-term

asis by increasing the physical distance between your SurroundBar 5000 IHT

b System and the microwave oven.

WARNING: LISTEN CAREFULLY

Polk Audio loudspeakers and subwoofersare capable of playing at extremely high volume levels, which could cause serious or permanenthearing damage. Polk Audio, Inc. accepts no liability

or hearing loss, bodily injury or property damage resulting from the misuse of its products.

Keep these guidelines in mind and always use your own good judgment when controlling volume:

You should limit prolonged exposure to volumes that exceed 85 decibels(dB).

• Refer to the Occupational Health and Safety Administration (OSHA) guidelinesat: www.osha.gov/dts/osta/otm/noise/standards_more.html.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party Responsible for compliance could void the user's authority to operate the equipment.

Polk Audio is a DEI Holdings, Inc. Company. Polk Audio, Polk, The Speaker Specialists, SDA, Polk Digital Logic and SurroundBar are registered trademarks of Polk Audio, Inc.

Products that have earned the Energy Star the environment through superior energy efficiency.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

The Bluetooth Bluetooth SIG, Inc. and any use of such marks by Polk Audio is under license. Other trademarks and trade names are those of their respective owners.

The “aptX reserved. The aptX of its group companies and may be registered in one or more jurisdictions.”

word mark and logos are registered trademarks owned by

software is copyright CSR plc or its group companies. All rights

mark and the aptX logo are trade marks of CSR plc or one

are designed to protect

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 13

+ 28 hidden pages

DEI Sales Polk Audio SB5000IHTTX, WF5000IHTRX User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual