Deif DLQA96, DLQAW96, DLQA144 Installation Instructions Manual

S

Installation instructions

DLQA96/144

Marine bridge instrumentation

4189350016B (UK)

•

360° indication with disc pointer

•

Linearized to class 0.5

•

LED illumination of scale and disc

•

100% identical illumination of scale and disc

DEIF A/

•

Shock resistant up to 50 g

•

Enclosure IP52/54 or IP66 (only Q96 size)

•

Approved according to the European Marine Directive

DEIF A/S Tel.: [phone]
Frisenborgvej 33, DK-7800 Skive Fax: [phone]
Denmark E-mail: [e-mail]

1. Description

The illuminated X-coil instruments types DLQA96/144 are designed for marine
applications. The instruments can be applied as rudder indicator, azimuth indicator,
compass indicator or wind direction indicator where a reliable and accurate instrument
is prescribed.

The light intensity can be altered by means of a common dimmer for all instruments.
Dimming of an instrument can be done by means of a 1kΩ potentiometer.

2. Mounting instructions

DLQA96/144 is designed for installation in bridge consoles or switchboards.

All dimensions in mm

Type A B C D E F G H (max.) J Weight

DLQA96
DLQA144
DLQAW96

96 x 96
144 x 144
102 x 102

4.5

4.5

5.3

5.5

8.0

4.2

66.0

69.0

68.3

19
19
19

90 x 90

136 x 136

90 x 90

103
150
103

12
12
12

92 x 92 +0.8
137 x 137+1.0
92 x 92 +0.8

The instrument is mounted by means of the 2 fixing elements. For instruments with
IP54 or IP66 protection, use all 4 fixing elements and the rubber gasket (included in
the packing).

(kg)

0.230

0.385

0.250

3. Connection

DLQA96/144 instruments differ from the other DLQ instruments, as the DLQA96/144
instruments are based on an X-coil system and not on a moving-coil system like the
other instruments in the product programme of DEIF A/S. Due to the X-coil technology
it is possible to have an instrument with a scale curve of 360°, which is not possible in
the conventional moving-coil systems. As the X-coil system requires a special
controller integrated in the instrument, the DLQA96/144 instruments are to be
connected to an auxiliary supply – unlike conventional instruments. The plugs marked
PROG and COM are for factory use only.

Page 2 of 7 Tel.: [phone] • Fax: [phone] • E-mail: [e-mail]

Installation instructions, DLQA96/144

DLQA96/144 is protected against ESD (static electricity). Therefore, when connecting
the instrument, no special protection from ESD is needed.

When the instrument is mounted in the console/switchboard, the terminal on the rear
side is connected to the cable.

The instrument is configured either for “single input” or for “double input” – here it is
configured for connection to a SIN/COS converter.

Auxiliary supply: AUX 24V -/+
Illumination: ILLUM -/+
Input: INPUT B/GND/A (see the table for single/double input)

4189350016B (UK)

4. Adjustment and control

As the instrument is linearized to a max. indication error of 0.5% corresponding to a
max. deviation of ±1.8° over the entire scale curve of 360°, it is not provided with an
adjustment device. For control of deflection (indication) as a function of input the table
below can be applied.

Single input:

Measuring
range

4...20mA

(Disc moves
CW with posi­tive input)

0...1mA

(Disc moves
CW with posi­tive input)

-10...0...10V

(Disc moves
CW with posi­tive input)

Double input (SIN/COS):

Measuring
range

4...20mA

0...1mA

-10...0...10V

Input A Input B Disc position

in degrees

4.00mA 0 12

Not connected

Clock position

of disc

8.00mA 90 3

12.00mA 180 6

16.00mA 270 9

20.00mA

0.00mA 0 12

Not connected

360 12

0.25mA 90 3

0.50mA 180 6

0.75mA 270 9

1.00mA

-10.00V 0 12

Not connected

360 12

-5.00V 90 3

0.00V 180 6
+5.00V 270 9
+10.00V

Input A

SIN

Input B

COS

360 12

Disc position

in degrees

Clock position

of disc

12.0mA 20.0mA 0/360 12

20.0mA 12.0mA 90 3

12.0mA 4.0mA 180 6

4.0mA 12.0mA 270 9

0.5mA 1.0mA 0/360 12

1.0mA 0.5mA 90 3

0.5mA 0.0mA 180 6

0.0mA 0.5mA 270 9

0.0V +10.0V 0/360 12
+10.0V 0.0V 90 3

0.0V -10.0V 180 6

-10.0V 0.0V 270 9

Page 4 of 7 Tel.: [phone] • Fax: [phone] • E-mail: [e-mail]

Installation instructions, DLQA96/144

5. Technical specifications

Basic accuracy: Class 0.5 (-10...15...30...55°C) according to EN 60051 and IEC 51

Adjustments: None

Instrument sizes: 96 x 96mm and 144 x 144mm according to DIN 43700

Bezel: Slim bezels according to DIN 43718

Scale: Figures, lines and font size according to customer design and

specification
Base material: Scale printed directly on front glass
Design only on black scale base!

Pointer: Rotation disc according to customer specification/design
Design only on black pointer base (disc)!

Glass: Antiglare, thickness 2mm

Mounting angle: May be mounted at any angle between 0…360° to horizontal

without this affecting the linearity according to DIN 16257

Compass safety
distance: To be mounted at least 1m from the compass according to IEC

945 and EN 60945

Analogue inputs: Single or double (for SIN/COS input)

Measuring ranges: -10...0...10V Load: 10kΩ
0…1mA Load: 1.0V
4…20mA Load: 1.0V

Response time: Max. pointer movement: 90°/second, no overshoot

Protection: IP52 from front, IP20 from back (terminals) according to IEC 529

and EN 60529
(IP54 from front is optional with special gasket)
or
IP66 option in special DLQW housing, IP20 from back (terminals)

according to IEC 529 and EN 60529

Climate: Class H U E, short term condensing allowed
Max. 95% RH: Max. 30 days per year
Max. 85% RH: Remaining days
Max. 75% RH: Average per year
According to DIN 40040

4189350016B (UK)

Temperature: -10…55°C (nominal)

-25…60°C (operating)

-25…65°C (storage)
Temperature coefficient: Max. ±0.5% of full scale within -10…55°C
according to IEC 51 and EN 60051

Panel influence: Linearity is not affected by the panel (thickness or material)

according to IEC 51 and EN 60051

Shock: 18 x 50 g half sine (11mS) according to IEC 68-2-27. Test: Ea

Vibration: 3…13.2Hz: 2.0mm peak-peak (±1.0mm) according to GL + LR:

Test 1

13.2…100Hz: 0.7 g according to DNV: Class A

Safety: 300V – cat. III, pollution degree 2 according to EN 61010-1

Galv. separation: 500V between all groups

Supply voltage: Power supply: 24V DC -25/+30% (18…24…31.2V DC)
Illumination: 12mA/24V DC

Consumption: <3W (24V/120mA), excl. illumination

EMC: CE marked for residential, commercial and light industry plus

industrial environment according to EN 50081-1/2 and EN 50082-

1/2

Class approval: Marine Equipment Directive 96/98/EC (MED)

Connections: Separate screw terminals for instrument input, power supply and

illumination
Max. 2.5mm² multi-stranded or 4.0mm² single-stranded

Materials: All outer materials are self-extinguishing according to UL94 (V0)

Page 6 of 7 Tel.: [phone] • Fax: [phone] • E-mail: [e-mail]

Installation instructions, DLQA96/144

6. Illumination

Illumination input: 24V DC. Adjustment range: 10...30V. Galvanically separated from

other circuits

Colour: Red and green light (LED based) combined giving a white/yellow

colour

Current consump.: DLQA96/144: 12mA/24V DC

Galv. separation: 500V – 50Hz – 1 min. between groups (3 groups)

If protection against voltage transients (surge pulse) for the auxiliary supply AUX 24V

-/+ and input for ILLUM -/+ is required, these inputs are to be protected externally. The
protection must be positioned no more than 10 m from the DLQA96/144 instrument
and must meet the requirements of the class and the legislation.

External dimmer

Errors and changes excepted

4189350016B (UK)