para seleccionar el idioma, tarjeta de
asuntos legales
FR Haut-parleur, câble de recharge,
bouton de sélection de la langue,
carte de visite
CHARGING
RECARGE DE BATERÍAS / CHARGE
3h
EN Charge 3 hours for up to 8 hours of play time.
ES Una recarga de 3 horas rinde hasta 8 horas de
operación.
FR Une charge de 3 heures donne jusqu’à 8 heures
d’autonomie de la batterie.
or
o, ou
AC adaptor not included
El adaptador de corriente alterna
(CA) no está incluido
Adaptateur c.a. non inclus
CONTROLS
CONTROLES / COMMANDES
Volume Down
Bajar el volumen
Diminution du volume
Low Battery
Batería baja
Piles faibles
Charging
Recargando
Charge
Play/Pause
Tocar/Pausa
Lecture/pause
Microphone
Micrófono
Microphone
Ready
Listo
Prêt
Pairing Mode
Modo de vinculación
Mode synchronisation
Connected
Conectado
Connexion établie
Volume Up
Subir el volumen
Augmentation du volume
Line-In Mode
Modo de linea directa
Mode prise d’entrée
BLUETOOTH® CONNECTION
CONECCIÓN BLUETOOTH® / CONNEXION BLUETOOTH
EN Press and hold the power button
ES Para encender, deprima y mantenga
FR Tenez le bouton de mise en marche
EN Enable Bluetooth on your device
ES Habilite la función Bluetooth en su
FR Activez la fonction Bluetooth de
Bluetooth
Devices
Jam XT
3s
on
>
®
on the bottom of the speaker for 3
seconds to power on.
deprimido el botón de poder en la
parte de abajo del altavoz por 3
segundos.
situé sous le haut-parleur enfoncé
pendant 3 secondes pour allumer
l’appareil.
and choose Jam XT from the list.
If prompted, enter code “0000.”
dispositivo y elija Jam XT de la lista.
Si se requiere, meta el codigo “0000”.
votre appareil et choisissez Jam XT
dans la liste des signaux détectés. Si
l’appareil vous le demande, inscrivez
le code «0000».
2m
15m
EN Your speaker will automatically
power off after 2 minutes of
unpaired inactivity.
ES Sus altavoz se apagarán
automaticamente depues de 2
minutos de estar desconectados del
Bluetooth.
FR Votre haut-parleur s’éteint
automatiquement après 2 minutes
d’inactivité sans signal.
EN Once paired, your speaker will
power off if you pause the party
for 15 minutes or more.
ES Despues de haberse vinculado, su
altavoz se apagará si usted pausa la
fiesta por más de 15 minutos.
FR Une fois synchronisé, votre haut-
parleur s’éteint automatiquement si
vous interrompez la fête pendant 15
minutes ou plus.
SPEAKERPHONE CONTROLSNEED MORE HELP?
CONTROLES PARA EL PARLANTE DEL TELÉFONO /
COMMANDES DU TÉLÉPHONE À HAUT-PARLEUR
EN Short press play/pause to answer
an incoming call. Long press to
reject.
ES Depresione rapidamente el botón
0.5s
3s
0.5s
3s
See the full user guide for complete details.
Por favor revise la guía de uso para los detalles de uso completos.
Consultez le guide complet de l’utilisateur pour obtenir de plus amples directives.
Tocar/Pausa para recibir la llamada
entrante. Depresionelo mas tiempo
para rechasar la llamada.
FR Répondez à un appel en appliquant
une légère pression sur le bouton de
lecture/pause tout simplement. Gardez
le bouton de lecture/pause enfoncé un
moment pour refuser l’appel.
EN Short press play/pause to end an
active call. Long press to move call
to device.
ES Depresione rapidamente el botón
Tocar/Pausa para terminar la llamada
activa. Depresionelo mas tiempo para
transferir la llamada a su dispositivo.
FR Appliquez une légère pression sur
le bouton de lecture/pause pour
raccrocher. Gardez le bouton enfoncé
un moment pour transférer l’appel à
votre appareil.
¿NECESITA MÁS AYUDA? / BESOIN D’AIDE?
www.jamaudio.com/
instruction-books
CUSTOMER SERVICE
SERVICIO AL CLIENTE / SERVICE À LA CLIENTÈLE
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F / L–V
EN For complete user guide and to register
your product, visit us online.
ES Para la Guía de Uso completa, y para registrar
su producto con nosotros, por favor visitenos
en la internet.
FR Pour consulter un guide complet de
l’utilisateur et enregistrer votre appareil, visitez
notre site Web.
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F / L–V
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help. Changes or modifications
to this unit not expressly approved by the part responsible for compliance could void the
user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
IC Notice:
This device complies with Canada Industry licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference. and (2) this device must accept any interference. Including
interference that may cause undesired operation of the device.
CAN ICES-3 (B)
Le présent appareil est conforme aux CNR d'industrie Canada applicables aux
appareils radio exem pts de licence L'exploitation est autorisée aux deux
conditions suivantes:
1) I'appareil ne doit pas produire de brouillage, et
2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme
si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais