Defy 600MFA U, 600MFA E Installation And Use Manual

Page 1

DBO480
DBO481

OVEN DEFY SLIMLINE

600MFA U / 600MFA E

Users Manual

Record in the space below the listed information for future reference. The rated current is
printed on the serial number label attached to the oven side trim.

SERIAL NUMBER…………………………………………………………………………………..

DATE OF PURCHASE……………………………………………………………………………...

PURCHASED FROM………………………………………………………………………………..

………………………………………………………………………………………………………….

Part Number: 070535

The manufacturer strives for continuous
improvement. For this reason, the text and
illustrations in this manual are subject to change
without notice.

Page 2

Dear Customer,

Your new Defy oven was manufactured in a state of the art facility and has passed the
strictest quality control procedures.

Please read this manual carefully before using your oven for the first time and then store it
within easy reach for future reference.

This manual will provide you with information on how to operate and care for your oven to
gain the maximum benefit from it.

We trust you will enjoy years of trouble free use.

EXPLANATION OF SYMBOLS

Important information

Warning—Hazardous situations

Warning—Electric shock

Caution; Warning for fire hazard

Caution; Warning for hot surfaces

Contents

PLEASE REGISTER YOUR PRODUCT AT

www.defy.co.za

DEFY APPLIANCES (PTY) LTD
P.O.BOX 12004
JACOBS
DURBAN
4026
SOUTH AFRICA

1. Important Safety Instructions 3
General safety 3
Electrical safety 3
Intended use 5

Safety for children 5

2. General information 6

Overview 6
Technical Specifications 6

3. Installation 7
Before installation 7
Built in oven cut outs 8
Package contents 9
Installation and connection 9
First cleaning of the appliance 10
Initial heating 10
Tips for energy saving 10
Future transportation 10

4. How to use the oven 10

General information about baking, roasting
and grilling 10
How to operate the electric oven 11
Using the oven 11
Selector switch 12
How to operate the grill 12

5. Maintenance and care 13

General information 13
Cleaning the oven 13
Removing the oven door 13
Replacing the oven light 14

6. Trouble Shooting 14

7. Service Centres 15

8. Warranty 16

Page 3

This section contains safety
instructions that will help you
avoid risk of injury and damage.
All warranties will become void if
you do not follow these
instructions.

General safety

x This appliance is not intended

for use by persons (including
children) with reduced physical,
sensory or mental capabilities
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning the use
of the appliance by a person
responsible for their safety.

x Children must be supervised to

prevent them from tampering
with the appliance.

x Installation and repair

procedures must always be
performed by authorized
service agents. The
manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorized persons which
may also void the warranty.
Before installation read the
instructions carefully.

x Do not operate the appliance if

it is defective or has any visible
damage.

x Make sure that the appliance

function controls are switched
off after every use.

1. Important safety instructions

Electrical safety

x If the appliance has a failure, it

should not be operated unless it
is repaired by an authorized
service agent. There is a risk of
an electric shock!

x Connect the appliance to an

earthed outlet/line protected by
a fuse of suitable capacity.
Have the earth installation
made by a qualified electrician.

x This appliance must be

earthed and the manufacturer
and the seller do not accept
responsibility for any damage
due to incorrect installation
or electrical connection.

x Never wash down the appliance

with water! There is the risk of
electric shock!

x The appliance must be

disconnected from the mains
during installation,
maintenance, cleaning and
repair procedures.

x If the supply cord is damaged, it

must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.

x The appliance must be installed

so that it can be completely
disconnected from the network.
The separation must be
provided either by a mains plug,
or a switch built into the fixed
electrical installation according
to construction regulations.

Page 4

x

The rear surface of the oven
gets hot when it is in use.
Ensure that the electrical
connection does not come into
contact with the rear surface so
as not to damage connections.

x Do not trap the mains cable

between the oven door and
frame, do not route it over hot
surfaces as the cable insulation
may melt and cause a fire as a
result of a short circuit.

x Any work on electrical

equipment must only be carried
out by authorized and qualified
persons.

x In case of any damage, switch

off the appliance and
disconnect it from the mains. To
do this, switch off the circuit
breaker at the wall.

x Ensure that the fuse rating is

compatible with the appliance.

Appliance safety

x The appliance and its

accessible parts become hot
during use. Care must be taken
to avoid touching heating
elements inside the oven.
Children must be kept away
unless continually supervised.

x Never use the appliance when

your judgment or coordination is
impaired by the use of alcohol
and/or drugs.

x Keep all ventilation slots clear

of obstructions.

x Use shelves as described on

page 11.

x Be careful when using alcoholic

drinks in dishes. Alcohol
evaporates at high
temperatures and may ignite
and cause fire when coming
into contact with hot surfaces.

x Do not place any flammable

materials close to the appliance
as the sides may become hot
during use.

x Do not heat closed tins and

glass jars in the oven. The
pressure build-up in the tin/jar
may cause the tin/jar to burst.

x Do not place baking trays,

dishes or aluminium foil directly
onto the bottom of the oven.
The heat accumulation may
damage the bottom of the oven.

x Do not use harsh abrasive

cleaners or sharp metal
scrapers to clean the oven door
glass as these may scratch the
glass surface.

x Do not use steam cleaners to

clean the appliance as this may
cause an electric shock.

x Do not use the appliance if the

front door glass has been
removed or is cracked.

x Always use heat resistant oven

gloves when putting in or
removing dishes into/from the
hot oven.

x Ensure the appliance is

switched off before replacing
the lamp to avoid the possibility
of an electric shock.

Page 5

x

Do not carry out any repairs or
modifications on the appliance.

To prevent a fire hazard

x Ensure plug is well fitted into

socket so that it does not spark.

x Do not extend or cut the power

cable. Use only an original
power cable. Do not use a
damaged power cable.

x Ensure that there is no liquid or

moisture on the socket where
the appliance is plugged in.

Safety when working with
electricity

x Defective electric equipment is

one of the major causes of
house fires

x Any work on electrical

equipment and systems should
only be carried out by
authorized and qualified
persons. If the appliance is
damaged in any way, do not
use it. Report the damage to
your dealer, who will take the
necessary corrective action.

x Make sure that the fuse rating

is compatible with the
appliance.

Intended use

x The appliance must only be

used for domestic use and for
the purposes for which it was
designed. Commercial use will
void the guarantee. This
appliance is for cooking
purposes only. It must not be
used for other purposes, for
example room heating.

Safety for children

x Electrical appliances are

dangerous to children. Keep
children away from the
appliance when it is operating
and do not allow them to play
with the appliance.

x Accessible parts of the

appliance will become hot
whilst the appliance is in use.
keep children away until the
appliance has cooled down.

x Do not place any items above

the appliance that children may
reach for.

x Ensure that packaging material

is disposed of in a responsible
manner. Plastic bags must be
cut up to prevent children
playing with them and
accidentally suffocating.

x When the oven door is open

do not load any heavy objects
on it and do not allow children
to sit on it. The appliance may
overturn or the door hinges
may be damaged.

x Do not use the appliance for

warming plates under the grill,
drying towels, dish cloths or
similar textile products by
hanging them on the oven door
handle.

x The manufacturer shall not be

liable for any damage caused
by improper use or handling
errors.

x The oven can be used for

defrosting, baking, roasting and
grilling food.

Page 6

2. General Information

Technical Specifications

Voltage / frequency 220-240V~ 50 Hz
Maximum power

consumption

3.4 kW

Amperage 16 A
External dimensions

(height / width / depth)

605 mm x 595 mm x 565
mm

Installation dimensions
(height / width / depth)

Refer to page 8**

Main oven

Static oven
Energy efficiency class* A
Inner lamp 25 W
Grill power consumption

1.8 kW

Overview

* Basics: Information on the energy label of electrical

ovens is given in accordance with the EN 50304
standard. Those values are determined under
standard load with bottom-top heater or fan
assisted heating (if any) functions. The energy
efficiency class is determined according to function:
Cooking with eco-fan

** See Installation.

WARNING Hot surfaces may cause
burns! Do not touch the hot surfaces of the
appliance. Use oven gloves. Keep children
away from the appliance.

DANGER Risk of fire by overheated oil!
When heating oil, do not leave it
unattended. Never try to extinguish a fire
with water! When oil has caught fire,
immediately cover the pot or pan with a
lid. Switch off the hob if safe to do so and
phone the fire service.

Figures in this manual are schematic and
may not exactly match your appliance.

Values stated on the appliance labels or in
the documentation accompanying it are
obtained in laboratory conditions in
accordance with relevant standards.
Depending on operational and
environmental conditions of the appliance,
these values may vary.

Some models feature a protective film
over stainless steel trim. This film must be
carefully removed before using the
appliance.

1

Control panel

2

Wire shelf

3

Tray

4

Handle

5

Door

Page 7

The appliance must be installed by a qualified person
in accordance with the regulations in force.
Installation is the buyer’s responsibility. The
manufacturer accepts no liability for this service. Any
action that the manufacturer has to take as a result of
an erroneous installation will not be covered by the
warranty.

3. Installation

Preparation of location and electrical
installation for the appliance is the
customer’s responsibility.

DANGER: The appliance must be

installed in accordance with all local
electrical regulations.

DANGER: Prior to installation, visually
check if the appliance has any defects on
it. If so, do not have it installed. Damaged
appliances cause risks for your safety.

Before installation

The appliance is intended for installation in
commercially available kitchen cabinets. A safety
distance must be left between the appliance and the
kitchen walls and furniture. See figures on following
page: “Built in oven cut outs” (values in mm).

Cooking appliances generate considerable heat. The
layout and materials of the mounting cabinet should
take account of these characteristics.

x Surfaces, surrounding edges, synthetic laminates

and adhesives immediately adjacent to the
appliance should be able to withstand
temperatures of up to 100°C without delaminating
or discolouring.

x Kitchen cabinets must be set level and fixed.
x If there is a drawer beneath the oven, a shelf must

be installed between the oven and drawer.

x Carry the appliance with at least two persons.

Do not install the appliance next to
refrigerators or freezers. The heat emitted
by the appliance will lead to an increased
energy consumption of cooling products.

The door and/or handle must not be used
for lifting or moving the appliance.

Do not place any objects onto the
appliance and move it in upright position.

Check the general appearance of your
appliance for any damages that might
have occurred during transportation.

Under-counter oven installation

x Note: The oven cavity must vent through the

front only. Avoid gaps between the cavity sides

and the underside of the worktop.

x Insert the oven into the cupboard.
x Open the door to expose the fixing holes in the

side trims.

x Secure the oven by 4 countersunk screws

(fasteners are not supplied).

x The hob should be installed in a ventilated

cupboard fitted with a sturdy worktop .

x Secure the hob using the fixing brackets provided.

Note: Hob installation for under-counter oven

x Hobs have their own dedicated owner’s manual,

detailing installation and operating instructions.

x Do not discard the hob packaging before first

retrieving this manual.

x Defy Slimline under-counter ovens may be installed

at eye level if so desired.

x A wiring extension kit is available from the nearest

Defy Service Centre.

Final check

1. Connect the oven and switch on the power.

2. Check the functions.

WARNING: Under no circumstances
should the bake element be covered with
aluminium foil. Nor should a pan or tray be
positioned directly above the bake element.
Doing so would reflect the heat from the
bake element downwards. Heat to the oven
would be restricted and overheating of the
space below the element would result in
damage to the oven enamel.

SAVE THESE INSTRUCTIONS

For appliances with a cooling fan

The built-in
cooling fan
cools both the
built-in cabinet
and the front of
the appliance.

Please note that the cooling fan may
continue to run well after the oven has
been switched off. The duration is
dependent on the selected operating
temperature. This is a built-in safety
feature to ensure that your oven is cooled
down correctly. To reduce the cooling fan
running time, the oven door may be left
ajar after the oven has been switched off.
Please be cautious of hot surfaces.

1 Cooling fan
2 Control panel
3 Door

Page 8

x Insert the oven into the cupboard.
x Open the door to expose the fixing holes in the side trims.
x Secure the oven by 4 countersunk screws (fasteners are not supplied).

590

Aperture

Typical section showing
ventilation requirements.

565

900

Above floor
level

Floor

60

+_3

0

+_3

0

+_3

0

+_3

0

APERTURE

590 H X 565 W X 570 D

Built in oven cut outs. Cupboard aperture for models 600SU and 600U

Worktop
32mm - 48mm thick

Vent

gap

at

front

only

100

590

Aperture

(210)

Floor

Datum

900

565 Aperture

Top filler piece

Typical section showing
ventilation requirements.

Aperture

590 H x 565 W x 570 D

6

+_3

0

+_3

0

+_3

0

Eye-level oven installation for models 600E and 600SE

Aperture

Page 9

Oven tray

Suitable for large roasts, chicken portions and roast
potatoes.

Package contents

Accessories supplied can vary depending

on the appliance model. Not all
accessories in the user manual may be in
your appliance.

Wire Shelf

Used for roasting and for placing food to be baked,
roasted or cooked in casserole dishes on to the
desired shelf runner.

Placing the wire shelf and tray onto the shelf
runners properly

It is important to place the wire shelf and/or tray onto
the runner properly.
Slide the wire shelf or tray between the runners and
make sure that it is properly fitted before placing any
food on it.

Installation and connection

The appliance must be installed in accordance with all
electrical regulations.

DANGER: Risk of electric shock! Before
starting any work on the electrical
installation, please disconnect the
appliance from the mains supply.

DANGER: The appliance must be
connected to the mains supply only by
authorised and qualified persons. The
appliances warranty period starts only
after correct installation. The
manufacturer shall not be held
responsible for damages arising from
procedures carried out by unauthorised
persons.

DANGER: Risk of electric shock, short
circuit or fire by damage of the mains
lead! The mains lead must not be
clamped, bent or trapped or come into
contact with hot parts of the oven. If the
mains lead is damaged, it must be
replaced by a qualified electrician.

Electrical installation

This appliance must be earthed and the manufacturer
and the seller do not accept responsibility for any
damage due to incorrect installation or electrical
connection.
This appliance should not be connected through an
earth leakage system. Refer to S.A.N.S.10142
Support the oven in front of the aperture and make
the electrical connection before installing. This will
ensure enough cable length for subsequent
servicing.

Connection to the power supply

The connection must be carried out by a licensed
electrician, who will ensure that the oven is correctly
connected and safely earthed. The rated current is
printed on the serial number label attached to the
oven side trim.
The appliance must be connected to the mains
through a double pole isolating switch which has a
minimum clearance between the contacts of 3 mm. in
both poles.
A means for disconnection must be provided in the
fixed wiring.

Connecting the sprague to the oven

WARNING! ELECTRICAL

CONNECTION MUST ONLY BE DONE
BY A QUALIFIED ELECTRICIAN!

Purchase a standard plastic/metal saddle type
bracket, capable of going around the 20 mm diameter
sprague and with a hole pitch of 38 mm (Plastic) 45
mm (Metal), from your local hardware and 2 off 4.2
mm x 12 mm self tapping screws.

Connect the cabling onto the stove connecter.

1

2

Page 10

Future Transportation

x Keep the appliances original carton and transport

the appliance in it. Follow the instructions on the
carton. If you do not have the original carton, pack
the appliance in bubble wrap or thick cardboard
and tape it securely.

x To prevent the wire grill and tray inside the oven

from damaging the oven door, place a strip of
cardboard onto the inside of the oven door that
lines up with the position of the trays. Tape the
oven door to the side walls.

x Do not use the door or handle to lift or move the

appliance.

4. How to use the oven

DANGER

Risk of scalding by hot
steam! Take care when
opening the oven door as
steam may escape.

First cleaning of the appliance

Surfaces might get damaged by some

detergents or cleaning materials. Do not
use aggressive detergents, cleaning
powders/creams or any sharp objects
during cleaning. Do not use harsh
abrasive cleaners or sharp metal
scrapers to clean the oven door glass
since they can scratch the surface, which
may result in the glass shattering.

1. Remove all packaging materials.

2. Wipe the surfaces of the appliance with a damp
cloth or sponge and dry with a cloth.

WARNING. Hot surfaces cause

burns! The appliance may be hot
when it is in use. Never touch the
inner sections of the oven, heaters
etc. Keep children away. Always use
heat resistant oven gloves when
placing or removing dishes into/from
the hot oven.

Electric oven

1. Take all baking trays and the wire shelf out of the
oven.

2. Close the oven door.

3. Select Static position.

4. Select the highest bake power; (See section on
how to operate the electric oven).

5. Operate the oven for about 30 minutes.

6. Turn off your oven.

Grill oven

1. Take all baking trays and the wire shelf out of the
oven.

2. The door must remain partially open.

3. Select the highest grill power; (See section on how
to operate the grill).

4. Operate the grill for about 30 minutes.

5. Turn off your grill.

Smoke and smell may emit for a

couple of hours during the initial
operation. This is quite normal.
Ensure that the room is well ventilated
to remove the smoke and smell. Avoid
directly inhaling the smoke and the
smell that emits.

General information on baking, roasting and
grilling

DANGER:

Be careful when opening the oven door
as steam may escape. Exiting steam can
scald your hands, face and/or eyes

Place the plastic/metal saddle around the sprague
and fasten via the 2 self tapping screws onto the
factory pre punched holes on the back of the stove.

3

Initial heating

Heat up the appliance for about 30 minutes and then
switch it off. Thus, any production residues or layers
will be burnt off and removed.

Tips for saving energy

The following information will help you to use your
appliance in an ecological way, and to save energy:
x Use dark coloured or enamel coated cookware in

the oven since the heat transmission will be better.

x While cooking your dishes, perform a preheating

operation if it is advised in the user manual or
cooking instructions.

x Do not open the door of the oven frequently during

cooking.

x Try to cook more than one dish in the oven at the

same time whenever possible. You can cook by
placing two cooking vessels onto the wire shelf.

x Cook more than one dish one after another. The

oven will already be hot.

x You can save energy by switching off your oven a

few minutes before the end of the cooking time. Do
not open the oven door.

x Defrost frozen dishes before cooking them.

Page 11

Foods that are not suitable for grilling

create a fire risk. Only grill food which is
suitable for intensive grilling heat. Do not
place the food too far in towards the
back of the grill. This is the hottest area
and fatty food may catch fire.

How to operate the electric oven

1. Set the Temperature knob to the desired
temperature.

2. Set the Function knob to the desired operating
mode.

» Oven heats up to the adjusted temperature and
maintains it. During heating, temperature lamp stays
on.

Switching off the electric oven

Turn the function knob and temperature knob to the
off position.

Ringer timer

The ringer timer may be used for timing a cooking
period of up to 60 minutes.
First wind the timer by turning the knob fully
clockwise.
Return the knob to the desired time period.
At the end of the this period the bell will ring.

Note: If the timer is not first fully wound the bell
may not ring.

Using the oven
Baking

This product is supplied with one chromed oven shelf
and a roast pan. If required, additional shelves, roast
pans and broiler may be purchased from any Defy
Service Centre.
Set the selector knob to the desired baking mode.
See descriptions on page 6. Top and Bottom
elements or Bottom element only.
Set the oven thermostat to the required temperature.
The thermostat indicator light will glow and remain on
until the oven has reached the selected temperature.
The light will then switch off. Thereafter place the food
in the oven. During the baking cycle, the indicator
light will switch on and off as the thermostat maintains
the selected temperature.

After baking is completed, the thermostat and the
selector knob must be turned to the "0"position in
an anti clockwise direction.
Note:

The oven thermostat is marked down to 70°C. When
set to this position, the oven may be used as a
warmer. All ovens extract moisture from the food
being cooked, especially so during the winter
months. This is normal and not detrimental to the food
or the oven.

Baking Guide:

Where possible, bake on the middle shelf position of
the oven. Place the food halfway between the back of
the oven and the door. Do not open the oven door
until at least two thirds of the baking time has lapsed.
The roast pan must not be used for baking purposes.

Set the selector switch and oven thermostat to their
respective Grill positions.
The thermostat indicator light will glow.
Preheat the grill element for about 5 minutes.
Partially withdraw the shelf and place the food in the
centre of the shelf.
Slide the shelf back into position and partially close
the door.
Monitor the grilling to avoid burning the food.
After grilling is completed, the oven thermostat and
the selector switch must be returned to the "0"
position in an anti-clockwise direction.

Tips for baking

Use non-sticky coated appropriate metal plates or
aluminum vessels or heat-resistant silicone moulds.
Make best use of the embossed shelf runners.
Place the baking mould in the middle of the shelf.
Select the correct embossed shelf runner position
before turning the oven or grill on. Do not change the
shelf position when the oven is hot.
Keep the oven door closed.

Tips for roasting

Treating whole chicken, turkey and large pieces of
meat with dressings such as lemon juice and black
pepper before cooking will increase the cooking
performance.
It takes about 15 to 30 minutes longer to roast meat
with bones when compared to roasting the same size
of meat without bones.
Each centimeter of meat thickness requires
approximately 4 to 5 minutes of cooking time.
Leave meat in the oven for about 10 minutes after the
cooking time is over. The juice is better distributed all
over the roast and does not run out when the meat is
cut.

Slide the wire shelf or baking tray into the desired
level of the oven. If you are grilling on the wire shelf,
slide the baking tray to the lower rack to collect any
fats. Add some water in the tray for easy cleaning.

Fish should be placed on the middle or lower shelf in
a heat-resistant plate.

Tips for grilling

When meat, fish and poultry are grilled, they quickly
brown, develop a crust and do not dry out quickly.
Flat pieces, meat skewers and sausages are
particularly suited for grilling as are vegetables with
high water content such as tomatoes and onions.
Distribute the pieces to be grilled on the wire shelf or
in the baking tray on the wire shelf so that the space
covered does not exceed the size of the grill element.

Grilling

The oven door must remain partially open during
grilling. Both the wire shelf and roast pan may be
used for grilling. The roast pan may also be used as a
drip tray under the wire shelf. Position the shelf in the
desired position below the grill element.

Page 12

Tips for baking cake

x If the cake is too dry, increase the temperature by

10°C and decrease the cooking time.

x If the cake is wet, use less liquid or lower the

temperature by 10°C.

x If the cake is too dark on top, place it on a lower

rack, lower the temperature and increase the
cooking time.

x If cooked well on the inside but sticky on the

outside use less liquid, lower the temperature and
increase the cooking time.

Tips for baking pastry

x If the pastry is too dry, increase the temperature by

10°C and decrease the cooking time. Dampen the
layers of dough with a sauce composed of milk, oil,
egg and yoghurt.

x If the pastry takes too long to bake, ensure that the

thickness of the pastry you have prepared does not
exceed the depth of the tray.

x If the upper side of the pastry gets browned, but

the lower part is not cooked, make sure that the
amount of sauce you have used for the pastry is
not too much at the bottom of the pastry. Try to
distribute the sauce equally between the dough
layers and the top of the pastry for an even
browning.

Tips for cooking vegetables

x If the vegetable dish runs out of juice and gets too

dry, cook it in a pan with a lid instead of a tray.
Closed vessels will preserve the juice of the dish.

x If the vegetables in a vegetable dish do not cook

properly, boil the vegetables beforehand or prepare
them like canned food and put in the oven.

How to operate the grill

Switching on the grill

1.Turn the Function knob to the desired grill symbol.

2.Then, select the desired grilling temperature.

3.If required, perform a preheating of about 5
minutes.
» Temperature light turns on.

Switching off the grill

1. Turn the Function knob to Off position.
x Grill performance will decrease if the wire grill rests

against rear part of the oven. Slide the wire shelf to
the front section of the rack and position it with the
help of the door in order to obtain the best grill
performance.

Cook the pastry in accordance with the

mode and temperature given in the
cooking table. If the bottom part is still
not browned enough, place it on one
lower rack the following time.

Foods that are not suitable for grilling

create a fire risk. Only grill food which
is suitable for intensive grilling heat.
Do not place the food too far in the
back of the grill. This is the hottest
area and fatty food may catch fire.

Selector switch

This switch allows the selection of the following oven
functions.

1. Off

2. Low grill + fan + bottom heating

3. Full grill

4. Low grill + fan

5. Bottom heating element

6. Top & bottom heating elements

7. Fan + top & bottom heating

Functions

Top and Bottom heating (Convection Bake): Both

the bottom bake element and the top heat element
are utilised. This position is ideal for baking, roasting
and cooking.

Bottom heating: Selecting only the bottom element
and setting the thermostat at the lowest temperature,
allows the oven to be used as a warming space.

Fan + top & bottom heating:

Warm air heated by the top and bottom heater is
evenly distributed throughout the oven rapidly by
means of the fan. Suitable for cooking your meals on
different shelf levels. Suitable for cooking with two
shelves.

Full grill:

Large grill at the ceiling of the oven is in operation. It
is suitable for grilling a large amount of meat.
Put big or medium-sized portions in correct rack
position under the grill heater for grilling. Set the
temperature to maximum level. Turn the food after
half of the grilling time.

Low grill & fan (Grill effect not as strong as full grill)
Put small or medium-sized portions in correct shelf
position under the grill heater for grilling. Set the
desired temperature. Turn the food after half of the
grilling time.

Low grill + fan + bottom heating

Warm air heated by the low grill and bottom heater is
evenly distributed throughout the oven rapidly by
means of the fan. Suitable for cooking your meals on
different shelf levels. Suitable for cooking with two
shelves.

Page 13

5. Maintenance and care

DANGER
Hot surfaces may cause burns!

Allow the appliance to cool down
before you clean it.

The surface may get damaged by
some detergents or cleaning materials.
Do not use aggressive detergents,
cleaning powder/cream or any sharp
objects. Do not use any harsh abrasive
cleaners or sharp metal scrapers to
clean the oven door and glass since
they can scratch the surface, destroy
the glass and could result in the glass
shattering.

HOOK

ELEMENT GUARD

ELEMENT

General information

x Clean the appliance thoroughly after each use,

making it easier to remove cooking residues and
helps prevent these from burning on the next use
of the appliance.

x Wipe down the cabinet, door, control panel, trims

and handles with a damp, hot soapy cloth.

x Use only liquid household cleaners and avoid

abrasive powders, scouring pads and caustic
cleaners.

x Rinse and wipe down with a clean cloth.

Cleaning the oven
x Open the oven door and allow the oven to cool

down.

x Clean the oven with a damp, hot soapy cloth. Do

not use a steam cleaner.

x It may be necessary to soak burnt soils with a

liquid cleaner to soften them before scrubbing
them with a nylon brush or scouring sponge.

x Heavy soils on the bottom of the oven may require

overnight soaking under a sponge liberally
sprinkled with household ammonia. Remove the
soil the following morning by washing normally.

x Always ensure that any excess liquid is thoroughly

wiped off after cleaning and any spillage is
immediately wiped dry.

x Do not use cleaning agents that contain acid or

chloride to clean the stainless or inox surfaces and
the handle. Use a soft cloth with a liquid detergent
(not abrasive) to wipe these parts clean, paying
attention to sweep in one direction.

x For your convenience, the shelves and the bake

element guard may be removed to improve
access. After cleaning fit the bake element guard
into the guard clips. (see diagram)

x Note: For both safety and performance

reasons the oven should not be operated
without the oven element guard in place.

Removing the oven door

Steps carried out during the removal
process should be carried out in
reverse order to install the door. Do not
forget to close the clips at the hinge
housing when reinstalling the door.

Lift-off oven door

The oven door may be removed to improve oven
access during cleaning.

Removing the oven door

1. Open the front door (1).

2. Open the clips at the hinge housing (2) on the right
and left hand sides of the front door by lifting them
up. Hold the door on both sides and then close the
door and lift the door up to remove it. Refitting is
the reversal of removing.

1 Front door

2 Hinge

3 Oven

Do not use steam cleaners for
cleaning, there is a risk of an electric
shock.

DANGER
Risk of electric shock!

Switch off the electricity before cleaning
the appliance to avoid an electric
shock.

Page 14

DANGER: Before replacing the oven

lamp, ensure that the appliance is
disconnected from mains and cooled
down to avoid the risk of an electrical
shock. Hot surfaces may cause burns!

The oven lamp is a special electric light
bulb that can resist up to 300°C. See
Technical specifications for details. Oven
lamps can be obtained from Authorised
Service Agents.

Position of lamp might vary from the
figure.

Replacing the oven light bulb

To replace a faulty light bulb, proceed as follows:

1. Disconnect the product from mains.

2. Turn the glass cover counter clockwise to remove

it.

3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.

4. Install the glass cover.

Oven light
The oven light is switched on by the function
selector switch and switches off when the knob is
returned to 0.

6. Troubleshooting

Oven emits steam when it is in use.

It is normal that steam escapes during operation >>> This is not a fault.

The appliance emits metal noises while heating and cooling.

When the metal parts are heated, they may expand
and cause noise.

>>> This is not a fault.

The appliance does not operate.

The mains fuse is defective or has tripped.

Check fuses in the fuse box. If necessary, replace or
reset them.

The appliance is not plugged into the wall socket. >>> Check the plug connection.

Oven light does not work.

Oven lamp is defective. >>> Replace oven lamp.

Power is cut.

>>> Check if there is power. Check the fuses in the fuse
box. If necessary, replace or reset the fuses.

Oven does not heat.

Function and/or Temperature are not set.

>>> Set the function and the temperature with the
Function and/or Temperature knob/key.

If you have followed the instructions and still have a problem, contact the nearest Defy Technical
Support Centre. They will be able to advise you on any aspect of the product or send a qualified
technician to repair it. Never attempt to repair a defective appliance yourself.

Remember that you may be charged for a service call even during the warranty period if the fault is
due to or caused by any of the above.

Owner’s responsibility
Since the following are not factory faults, they are
the owner’s responsibility.

x Damage to exterior finish.
x Breakage of glass and other components.
x Replacement of the light bulb.
x Damage through improper use or installation of the

appliance.

x Damage caused by moving the appliance.

Page 15

7. Service Centres

OTHER AREAS ARE SERVICED BY OVER 200 AUTHORISED SERVICE AGENTS. PLEASE

CONSULT THE NEAREST REGIONAL DEFY SERVICE CENTRE FOR DETAILS.

Sub-Saharan Africa Service Agents:

ZAMBIA: SOUTHGATE INVESTMENTS LTD

Plot 1606, Sheki Sheki Road
P.O. Box 33681
Lusaka, 10101, Zambia
Tel: [phone]
Fax: [phone]
[e-mail]

NAMIBIA: ATLANTIC DISTRIBUTORS (PTY)
LTD

10 Tienie Louw Street, Northern Industrial Area
P.O. Box 21158, Windhoek, Namibia
Tel: [phone]
Fax: [phone]
[e-mail]

ZIMBABWE: TRADECOMAFRICA

Trade Com Africa, 183 Loreley Crescent
Msasa, Harare, Zimbabwe
Tel: [phone]
Cell: [phone]
Cell: [phone]

BOTSWANA: RAY MORGAN AGENCIES

RMA Service Centre, Plot 48, East Gate
Gaborone International Commerce Park
Kgale View, Gaborone
Botswana
Tel: [phone]
Fax: [phone]
Cell: [phone]
[e-mail]; [e-mail]

SWAZILAND: LYNDS DISTRIBUTORS

P.O Box 716, Mbabane, Swaziland, H100
Tel: [phone]
Fax: [phone]

MOZAMBIQUE: COOL WORLD. LDA

Rua da Resistencia No. 97B R/C
Cell: [phone]
[e-mail]
Nosso Show Room
Av: da Industrias, Parcela No.735 * 735A
Machava, Maputo

South African Service Agents:

BLOEMFONTEIN

160 Long Street, Hilton, Bloemfontein 9301
Tel: [phone]
[e-mail]

CAPE TOWN

5A Marconi Rd. Montague Gardens, 7441
Tel: [phone]
[e-mail]

DURBAN

135 Teakwood Road, Jacobs,
Durban, 4052
Tel: [phone]
[e-mail]

EAST LONDON

Robbie de Lange Road, Wilsonia,
East London, 5201
Tel [phone]

[e-mail]

JOHANNESBURG

Cnr. Mimetes & Kruger Sts. Denver ext.12
Johannesburg, 2094
Tel: [phone] or 011 621 0300
[e-mail]

POLOKWANE

87 Nelson Mandela Drive, Superbia 0699
Tel: [phone] / 7 / 8 / 9
[e-mail]

PORT ELIZABETH

112 Patterson Road, North End, Port Elizabeth
6001
Tel: [phone]
[e-mail]

PRETORIA

Block A1 Old Mutual Industrial Park,
Cnr. D.F.Malan Drive & Moot Str. Hermanstad,
0082
Tel: [phone]
[e-mail]

Page 16

8. Warranty

This certificate is issued by DEFY APPLIANCES (PTY) LTD manufacturers of Defy and Ocean
products, hereinafter the Company, to the original purchaser only, of the appliance described on the
certificate and shall constitute the only warranty given in respect of this appliance.

The Company warrants to the original purchaser that for a period of TWO YEARS from date of
purchase the appliance is free from defect under normal domestic use, both in workmanship and
material, subject to the following conditions.

1. Repair or replacement of any part of this appliance, found by the Company to be defective, shall
be at the election of the Company. The Company reserves the right to effect such service through
any of its Service Divisions or Authorised Service Dealers. The cost of such service shall be borne
by the Company in full, provided that the appliance is located no further than 50 km from a
Company Service Centre or an Authorised Service Dealer. Where the appliance is located beyond
the 50 km radius, the purchaser shall be liable for the standard travelling charges, as determined by
the Company.

CARRY IN SERVICE Microwave ovens, Compact cookers and small appliances are repaired in our

service centres and are not collected from the customers home. Faulty units must be delivered to
the purchasing dealer or to the nearest Company Service Centre for warranty repairs.

2. Rusted or corroded plates, vitreous enamelware, fuses and lamps are specifically excluded from
these warranties. It is an express condition of these warranties that the purchaser takes due care
and attention in the use and maintenance of the appliance. Abuse, misuse in conflict with operating
instructions, connection to incorrect voltages and subjection to commercial use shall release the
Company from its obligations.

3. This warranty shall become void and cease to operate if the appliance is dismantled by, or any
repairs to the appliance are effected by any persons not duly authorised by the Company, or if
substitute parts not approved by the Company are used in the appliance, or if the serial number of
the appliance is removed.

4. The Company shall not be responsible for damages resulting from fire, flood, civil disturbances or
any Act of God. The Company shall not, in terms of these warranties be responsible nor held liable
for any consequential loss or damage of any kind caused by or due to the failure or malfunction of
the appliance. The Company shall not be responsible for damages caused by insect and/or animal
infestation.

5. The Company shall not be responsible for transportation or other costs other than those incurred
within the provisions of Point 1 of this Certificate.

6. For warranties in the Republic of South Africa and Sub-Saharan Africa, please contact your
nearest Defy office. Please refer to the previous page for respective South African service
agents and Sub-Saharan Africa service agents.

7. Where service is requested under warranty and no fault or defect can be found by the Company,

all costs incurred will be for the purchaser's account.

8. This Certificate as well as your invoice will serve as proof of purchase. For the purpose of
warranty, it will be essential to produce this Certificate and invoice. Failure to do so, will render the
purchaser liable for service costs.

KEEP THIS CERTIFICATE AND SALES INVOICE AS PROOF OF PURCHASE FOR

WARRANTY PURPOSES.