Defy 600 EMSG, 600EMSS User Manual

OWNER’S MANUAL
Part No. 064 452 SLIMLINE
MULTIFUNCTION BUILT-IN OVENS
EYE LEVEL
600 EMSG 600 EMSS
R
E
E
M
I
T
T
/
O
N
CK
O
L
C
T
E
H
US
T
M
E
O
T
V
O
www.defy.co.za
T
E
S
E
T
B
E
L
B
A
W
N
O
T
N
E
YOU CAN RELY ON DEFY
Page 2
E
H
K
R
O
Page 1
Introduction Unpacking
2
Cupboard design
2
Electrical installation
2
Installation
3
The control panel
4
Automatic oven timer
4
Multifunction oven
7
Defrosting
7
Conventional oven
7
Conventional oven - fan assisted
8
Thermofan oven
8
Turbo grilling
9
Conventional grilling
10
Precautions
10
Control panel cooling fan
10
Maintenance
11
Cleaning
12
Care guide for Stainless steel
13
Problem check
15
Owners responsibilities
15
Service
15
Service branches
16
Warranty
17
Features
20
Introduction
Congratulations on the purchase of this quality product. We trust that you will enjoy many years of trouble free use. Please read these instructions carefully before using the oven. This manual will provide you with information on how to operate and care for your product in order that you gain the maximum benefit from it.
Unpacking
Please ensure that packaging material is disposed of in a responsible manner.
Plastic bags should be cut up to prevent children playing with them and accidentally
suffocating.
Remove all packing from the oven cavity and position the accessories.
If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
Cupboard design
Cooking appliances generate considerable heat. The layout and materials of the mount-
ing cabinet should take account of the characteristics of the oven.
Surfaces immediately adjacent to the oven should be able to withstand temperatures of
up to 100
Because the oven vents through the handle, overhanging doors above the oven may be
subjected to heat as well as condensation if very moist foods are being cooked.
°C without delaminating or discolouring.
Electrical installation
This appliance must be earthed and the manufacturer and the seller do not accept responsibility for any damage due to incorrect installation or electrical connection.
This appliance should not be connected through an earth leakage system.
Refer to S.A.B.S. 0142.
Support the oven in front of the aperture and make the electrical connection before in-
stalling. This will ensure enough cable length for subsequent servicing.
Connection to the power supply
The connection must be carried out by a licensed electrician, who will ensure that the oven is correctly connected and safely earthed. The rated current is printed on the serial number label attached to the oven side trim. The appliance must be connected to the mains through a double pole isolating switch which has a minimum clearance between the contacts of 3 mm. in both poles. A means for disconnection must be provided in the fixed wiring.
Page 2
Installation
Insert the oven into the cupboard.
Open the door to expose the fixing holes in the side trims.
Secure the oven by 4 countersunk screws (fasteners are not supplied ).
60
+_3
0
APERTURE
590 H X 565 W X 570 D
+_3
565
0
+_3
590 Aperture
900 Above floor
level
Floor
0
+_3
0
Typical section showing ventilation requirements
Page 3
The control panel
A
UTOMATIC OVEN
TIMER AND CLOCK
12:45
STOP
THE OVEN THERMOSTAT IS MARKED TO 70°C.
WHEN SET TO THIS POSITION, THE OVEN MAY BE USED AS A WARMER
MULTIFUNCTION OVEN
THERMOSTAT AND
INDICATOR LIGHT
Automatic oven timer / clock
BUTTON FUNCTIONS
1 = MINUTE MINDER 2 = COOKING PERIOD 3 = STOP TIME 4 = MANUAL CONTROL 5 = SUBTRACT 6 = ADD
MULTIFUNCTION SELECTOR
-
+
65 4 321
Setting the time of day
When the power is first connected ( or after a power failure), the clock display will
flash 00.00.
To set the clock, press buttons 1 and 2 and hold them down.
Press button 5 or 6 until the correct time of day is displayed.
Release the buttons. The clock is now set.
Please note that the clock has a 24 hour display.
For example 3.00 PM will be displayed as 15.00.
Minute minder
Suppose that you wish to time the boiling of a 5 minute egg.
First boil the water
Press and hold button 1. The display will show 00.00
Press button 6 until the display shows 00.05
Release the buttons and place the egg in the boiling water. The display will again show
the time of day.
After 5 minutes the timer will emit an electronic tone which lasts for about one minute
(2 beeps every 2 seconds). To cancel the tone, press any of the buttons.
Page 4
Note:
During the operation of the minute minder,
the remaining time may be displayed by pushing button 1
The minute minder can be used simultane-
ously and independent of any automatic
-
+
control program
The display will always revert to the time
of day after any program has been set.
654 321
Switching the oven on and off automatically ( Autobake )
Autobake is intended for dishes such as roasts and casseroles. These are not affected by a waiting period in a cold oven.
Prepare your meal and place it in the oven.
Set the cooking period required by pressing buttons 2 and 6 until the desired period is
displayed.
Set the stop time by pushing buttons 3 and 6 until the desired stop time is displayed.
Release the buttons and the clock will again display the time of day.
The word AUTO will light up on the clock display.
Set the multi function selector where applicable to the desired function..
Now set the relevant oven thermostat to the desired temperature setting
The automatic control will automatically switch the oven on and the symbol will light up in the clock display. Cooking will commence at the selected temperature and for the selected cooking period. The oven will automatically switch off at the selected stop time and emit an electronic tone for about one minute ( 4 beeps every 2 seconds ).To cancel the tone, press any of the buttons.
The word AUTO will flash until button 4 is pressed and manual control is restored.
Return the multi function selector to the OFF position
The oven thermostat must be turned to the OFF position in an anticlockwise direc-
tion.
Example:
Suppose the time of day is now 13h00. The food needs cooking for 2 hours at 180
°C and
it should be ready to serve at 18h00. Here’s what to do.
Ensure the clock is set to the correct time of day, 13.00.
Press buttons 2 and 6 until 02.00 is displayed
Press buttons 3 and 6 until 18.00 is displayed.
Set the oven thermostat to 180°C and the multi function selector to
,
OR
Hint: It is not advisable to use the Autobake function for cooking periods that are less than 60 minutes.
Page 5
Switching the oven off automatically
Suppose you have to go out and you will not be back in time to switch off a meal already cooking in the oven and requiring another 40 minutes before it is done. Pro-
-
ceed as follows:
Press and hold button 2. The clock will display 00.00.
Press button 6 until the clock displays 00.40.
Release the buttons and the clock will again display the time of day .
The word AUTO and
After 40 minutes the oven will switch off automatically and emit an electronic
will light up in the display.
+
654 3 2 1
tone for about one minute. ( 4 beeps every 3 seconds )
The word AUTO will flash until button 4 is pressed and manual control is restored.
Return the multi function selector to OFF
The oven thermostat must be turned to the OFF position in an anticlockwise direc-
tion.
Important
If the Automatic start and or stop functions are not required, the clock must be set to
manual mode. Unless this is done, the oven will not work.
Press button 4
Special feature -Key lock
When activated, the ‘Key Lock” prevents unauthorised persons or children operating the oven.
To Activate the key lock:
1. Ensure that the timer is in manual mode. ( Cancel any active programmes)
2. Press buttons 1 and 2 simultaneously and hold them down for approximately 8 seconds. The display will then read “ON”
3. Press button 6 and the display will read “OF” and a key symbol will appear.
4. After approximately 5 seconds, the clock will revert to the time of day but the key symbol will remain
5. In this mode the clock will function normally but the elements will not come on and the oven elements are thus disabled.
De-activating the Key lock
1. Ensure that the timer is in manual mode. ( Cancel any active programmes)
2. Press buttons 1 and 2 simultaneously and hold them down for approximately 8 seconds. The display will then read “OF”
3. Press button 6 and the display will read “ON” and a key symbol will disappear.
4. After approximately 5 seconds, the clock will revert to the time of day.
5. In this mode the clock and oven will again function normally.
Page 6
Loading...
+ 14 hidden pages