Deflecto EVE-6 User Manual

Technical

Technical Product Specifications

Undereve Vent® – For Bathroom Exhaust Venting (Soffit)

EVE/6

Undereve Vent

®

10

4

1

"

/

8

13

"

/

16

Model No. Description Color

EVE/6 Undereve Vent

®

White

Performance Data

for plastic molded under the eave / soffit vent

Undereve-Vent

• Calcium filled Polypropylene

• Melting point: 325º F/ 163 C approx.

• UV Inhibitor added

®

General Information

• quick, easy installation

• easily installs over the exhaust hole,

under the eave (soffit) to exhaust air
from bathroom fans

• helps prevent cold air from entering
home, birds from nesting in vents and
rodents from entering through vents

• all components constructed of heavy-duty

plastic
opening in soffit can be up to 5" diameter

•

for best installation practrice use our

•

EVEK4 kit to make a connection to the
exhaust duct

2"

3

1

/

16

For Dryer Venting

leave center rib

cut grid out

For dryer venting cut the entire grid out at
both ends. Leave the center rib. Use tin snips
to cut grid out before installing hood to soffit.

duct clips for holding duct

7"

1

2

/

"

"

leave center rib

cut grid out

4

damper

5" max diameter

damper

Application View

© 2013
DEFLECTO LLC • P.O. Box 50057 • Indianapolis, IN 46250 • www.deflecto.com
DEFLECTO/Canada Ltd. • St. Catharines, Ontario • Canada L2M 3Y2 • www.advp-deflecto.com

Deflecto's policy is one of continual product improvement in design and manufacturing wherever possible,
therefore all specifications and designs are subject to change without notice and without incurring obligations. 13.09 EVEtps-A