Deflecto 56xxx User Manual

ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE INSTRUCCIONES DE ENSAMBLAJE

Stand-Tall® Preassembled
Wall Literature Racks

1. Hold to wall or partition in desired location
and mark all open “keyholes” (located in
mid-section of panels - 4 or 6) with pencil
at top of keyhole.

MODELS / MODÈLES / MODELOS:

56001, 56201, 56301,

56401, 56801, 56901

2. Drive fasteners into the pencil marks with
hammer.

3. Expand anchors by turning screw to right
until tight.

www.deflecto.com

©2011 Deflecto, LLC

500INST-B

4. Remove screws and mount your
LITERATURE RACK.

5. Replace screws and tighten.

PLEASE NOTE:
If button fasteners should work loose during
shipping, simply snap them back in place.

Should one of your Literature Wall System
Units break or crack, cut off the button
fasteners and remove unit. See your dealer
for a replacement unit.