Definitive Technology ProCinema 600, ProSub 600, ProCenter 600, ProMonitor 600 Owner's Manual

DeFnitive

The

LeaderinHigh-Performance

Technolngj®

Loudspeakers®

ProCinema®

Ownerls

Congratulations

Congratulations on your purchase
Definitive Technology ProCinema 600
System. This high-performance six­speaker system is designed to deliver
equally superb sound with music or
movies. Please read the instructions

600

Manual

System

of

the

carefully in order to fully familiarize
yourself with the speaker system and

assure yourself that you realize all the

performance that has been engineered

into this superior product.

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible

in

or concealed damage most likely occurred
ourplant and should be reported at once to your Definitive dealer
or the shipping company which delivered your loudspeaker.

handling after it left

Safety

Precautions

for

ProSub

600

CAUTION! To reduce the riskofelectric shock and fire, do not remove the coverorback
plate

of

this device. There are no user serviceable parts inside. Please refer all servicing to
licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol

of

a lightning bolt inside a triangle is intended to alert
the user to uninsulated "dangerous voltage" within the device's enclosure. The international
symbol
of

of

an exclamation point inside a triangle is intended to alert the user to the presence

important operating, maintenance and servicing information in the manual accompanying
the device.
CAUTION! To prevent electrical shock, match wide blade

of

plug to wide slot, fully insert.
Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION!
or

moisture.

To

reduce the riskofelectrical shock, do not expose this

equipment

to rain

1.

Read Instructions-All safety and operating instructions should be read before operating the device.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3.

Heed

Warnings-All

4.

Follow Instructions-All operating and safety instructions should be followed.

5.

Water &

6.

Carts &

7.

Wall & Ceiling
by the manufacturer.

8.

Ventilation-The device should always be locatedinsuch a way that it maintains proper ventilation.
should never be placedina built-in installation oranywhere that may impede the flow
heat sink.

9.

Heat-Never
heat-generating devices.

10.

Power

operatinginstructions or as marked on the device.

II. Power Cord

crushed by items placed on them or against them. Special attention should be paid to areas where the

plug enters a socket or fused strip and where the cord exits the device.

12.

Cleaning-The

13.

PeriodsOfNon-Use-

14.

Dangerous
the device.

IS.

Damage Requiring

• The plug or power supply cord has been damaged.

• ObjeCts have fallenorliquid spilled insideofthe device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a marked changeinperfonnance.

• The device has been dropped or the cabinet becomes damaged.

16.

Service-The

specifiedbythe manufacturer should be used. The useofunauthorized substitutions may result

fire, shock. or other hazards.

Moisture-The

Stands-The

locate the device near heat sources suchasradiators, floor registers, stoves or other

Supply-The

Protection-Power

Entry-Care

warnings on the device andinthe operating instructions should be adhered

device should never be used in, on or near water for riskoffatal shock.

device should only be used on carts or stands recommended by the manufacturer.

Mounting-The

device should only be connectedtoa power supplyofthe type describedinthe

device should be cleanedinaccordance with manufacturer's instructions.

The device should be unplugged when not being used for extended periods.

should be taken that no foreign objects or liquids fall or are spilled inside

Service-The

device should always be serviced by licensed technicians. Only replacement

device should be mounted on a wall or ceiling onlyasrecommended

of

airthrough its

cables should be routed so they are not likely to be stepped on or

device should be serviced by licensed technicians when:

p'arts

to.

It

in

ProCinema 600

The Definitive Technology ProCinema 600 System consistsofsix speakers:
four ProMonitor® 600s, one ProCenter® 600 and one ProSub® 600. Normally two
the ProMonitor 600s will be used as front speakers and two will be used as side or
rear surround speakers. These speakers can be used with any surround decoding
technology; however, since they will most often be used with Dolby Digital*
receivers and decoders, the instruction manual is written for Dolby Digital hook-ups
(and DTS which is hooked up the same way).
receiver, please contact Definitive customer service for specific instructions that
apply to your system.

Six-Piece

Surround Sound System

If

you are using an earlier ProLogic'

of

Connecting Your Loudspeakers

Wiring up Your Speakers to Your Home Theater Surround Receiver

There are many different ways to wire your ProCinema 600 System to your home
theater surround receiver. In order to simplify this process, we will describe the two

1,

most common methods. Method
ProMonitor 600s to your ProSub 600 and then wiring your ProSub 600 to your
receiver, is the preferred method in terms
best blending between the satellite speakers and the sub as well
sound quality. Method 2, which involves wiring the front left and rightProMonitor
600s directly to your receiver and hooking your
less speaker wire and still sounds good but clearly not as good as Method
We

recommend Method1,ifpossible.

which involves wiring your front left and right

of

sound quality - it will give you the

as

the fullest, richest

sub

up withanRCA cable, uses

1.

Usuallyifdistortionisheard
causedbydriving
more

power
power
when

well

you

before

play

than

them

(turning

they

can

the

volume

loud,

when

up)

the

amplifier

handle.

Remember,

controlisturned

turn

down

the

the

speakers are

too

loud
most
all

being

and

amplifiers

the

way

not

amplifierorgetabigger

drivenatloud

driving

put

out

up!Ifyour

one.

levels,itis

the

speakers

their

full

with

rated

speakers distort

Method 1

1. First, wire the + (red) terminalofthe left channel speaker wire outputofyour receiv-

er

or amplifier to the + (red) terminalofthe left channel speaker wire

of

(high level) input

2. Next, wire the - (black) terminal
receiver or amplifier to the - (black) terminal
(high level) input

3. Repeat Steps I and 2 for the right channel.

4.

Wire the + (red) terminalofthe left ProMonitor 600to the left channel +(red)
speaker wire (high level) out on the back

your ProSub.

of

the ProSub.

of

the left channel speaker wire outputofyour

of

the left channel speaker wire

of

the ProSub.

*Registered trademarks.

5. Wire the - (black) terminal

speaker wire (high level) out on the back

6.

Repeat steps 4 & 5 for the right ProMonitor 600.

of

the left ProMonitor 600 to the left channel - (black)

of

the ProSub.

7. Set the low frequency filter control on the back
10 - 12 o'clock. Please note that the exact frequency will depend on many factors

of

including specific positions
with a slightly higher or lower setting to achieve ideal blending between the sub
and the satellites for your particular set-up. Listen to a wide variety
determine the correct.setting for this in your system.

the speakers in the room, so you might experiment

of

the subwoofer to approximately

of

music to

8. Set the subwoofer level control to approximately 12 o'clock. Please note that the

of

exact level depends on many factors including your room size, positions
speakers, etc. as well as your personal listening taste, so you might experiment

of

with the subwoofer level while listening to a wide variety
achieve the ideal setting for your system.

9.

Wire your center channel to the center channel out on your receiver (or center
channel amplifier) and your left and right rear surround speakers to the rear

on

channel outputs
speakers are

10. Set the bass management system

Right Main Speakers," "Small Center" and "Small Rear Surround Speakers" and
"No Subwoofer." All the bass information including the
will be directed to the main left and right channels and into the subwoofer giving
you all the benefits

in phase, i.e. + (red) to + (red) and - (black) to - (black).

your receiver or rear channel amplifier (taking care that all

of

your receiver or decoder for "Large Left and

of

Dolby Digital.

music until you

.1

channel LFE signal

the

Option for

An option on this hook-up (if your decoder will allow you to select "Large Left and
Right Main Speakers" and a "Subwoofer"), in addition to the hook-up
above, is to use an RCA-to-RCA low level cable to connect the LFE/sub-out on your
receiver to the low-level LFE/sub-in (the lower RCA input) on a ProSub. Tell your
bass management system that you have "Large Left and Right Main Speakers" and a
"Subwoofer" and "Small Center" and "Small Surrounds." You will then be able to
raise the LFE
remote level adjustment on your decoder (ifit has one) or the LFE
control on your Dolby Digital channel balancing procedure. This set-up has the advan-

of

tage
with music while also allowing you to "juice up the bass" for movies with the controls
on your decoder. It should also sound somewhat better.

Variationonthe

One variation on the optional hook-up is to hook up and adjust the system
described under "Optional Hook-Up" except select "Small Left and Right Main
Speakers" and a "Subwoofer" on the bass management system (along with "Small
Center" and "Small Rear Surrounds"). The advantage
Up

will be somewhat greater dynamic range (i.e., you can play the system louder).
However, depending on the specific characteristics
your bass management system, the transition and blending between the satellites and
subwoofer may not be quite as smooth and continuous as the Optional Hook-Up, or

Method

.1

allowing you to set the low frequency level on the ProSub for smooth balance

1Hook-Up

as

described

channel level being fed to the subwoofer by either using the LFE/sub

.1

channel level

Method 1 Optional Hook-up

as

of

this over the Optional Hook-

of

the crossovers designed into

with the basic hook-up detailed above in Steps
system louder, you can experiment with this variation.

one which can be used
"Large

settings on your decoder, and hook-up options as described until you find the best
combination for you.

Left and Right Main Speakers"

We

encourage you to experiment with the various settings on your subwoofer,

if

your decoder bass managementsystem does not allow a

1-10.

and

"Subwoofer" setting.

However,ifyou wish to play the

In

addition, this variation is also

VERY
procedure

up
perform
soundoftheir

basstothe
be

IMPORTANT:

Dolby

Digital

through

properly.

Also

note

properly

and

for

the

the

LFEorSub

system

that

Dolby

various

adjusted.

SETTING

Dolby

left

and

We

have

which

Digital

channels)

Follow

CHANNEL

ProLogic

right

front

speakers,

Out

low

level

spoken

with

couldbeclearly

decoders

which

vary

the

directionsinthe

systems

connection)

many

traced

have

from

BALANCE

and

decoders

center

channel,

which

system

users

backtoimproper

bass

management

unittounit.

hook-up

AND

BASS

MANAGEMENT

have

a critical

rears

and

subwoofer

mustbefollowedifthe

with

problems

system

systems

This

bass

directions

(systems

management

regarding

SYSTEMS

channel

balancing

(if

itishooked

systemisto

relatingtothe

balance.

which

system

bass

management.

overall

direct

must

the

also

Method 2

1. Wire the left front ProMonitor 600 directly to the left front channelofyour amplifier
or

receiver and the right front ProMonitor 600 directly to the right channelofyour

amplifier
and - (black) to - (black).

2. Use an RCA-to-RCA low-level cable to connectthe LFE/subwoofer out on your

receiver to the LFE input on your subwoofer.

3.

Wire
channel amplifier) and your left and right rear surround speakers to the rear chan­nel outputs on your receiver
are in phase, i.e.

or

receiver taking care that the speakers are in phase, i.e. + (red) to +(red)

your center channel to the center channel out on your receiver (or center

or

rear channel amplifier (taking care that all speakers

+(red) to +(red) and - (black) to - (black)).

4.

Set the bass management systemofyour receiverordecoder for "Small Left and
Right Main Speakers," "Small Center" and "Small Rear Surround Speakers" and
"Yes Subwoofer."

5. Set the variable low-pass crossover to

120'

clock. Please note that you can set the subwoofer level either by turning the
subwoofer level control on the back
ment in your receiver. We suggest setting the subwoofer to
making fine adjustments to the subwoofer level using the LFE level control on
your receIver.

150 and set the subwoofer level control to

of

the subwoofer or with LFE level adjust-

12

o'clock

and then

Speaker Break-In

Your ProCinema 600 System should sound good right outofthe box; however, an

of

20 -

40

extended break-in period
performance capability. Break-in allows the suspensioGs to work in and results in fuller
bass, a more open "blossoming" midrange and smoother high frequency reproduction.

hours or moreofplaying is required to reach full

Positioning Your Speakers in Your Room

It is important that some simple set-up recommendations be followed in order to
assure optimum performance in your room. Please remember that although these
recommendations are usually valid, all rooms and listening set-ups are somewhat
unique, so do not be afraid to experiment with the speakers. Remember, whatever
sounds best to you is correct.

Positioning

When used as front or sidelrear surround speakers, the ProMonitor 600s may be
used on a stand, a shelf,
on a shelf, try to place them forward on the shelf with the front
with the front
wish to use a stand we strongly recommend the Definitive ProStand
which was designed to be used with these speakers in order to achieve the highest

of

level
ing can be accomplished either by using the keyhole mount which is built into the
speakers
rately. Placement close to the wall will increase the bass and low midrange output
while placement further from the wall will decrease output in these ranges and at the
same time yield a somewhat more open and three-dimensional sound. As with other
aspects
perfect sound in your particular room.

performance as well as the most attractive styling combination. Wall mount-

or

of

set-up and adjustment we encourage experimentation in order to achieve

the

ProMonitor 600s in Your Room

or

mounted on the wall or ceiling.Ifyou place the speakers

of

the speaker even

of

the shelfrather than pushed back toward the rearofthe shelf.Ifyou

60/80/600/800

with the ProMount 80/800 pivoting wall mount which is available sepa-

Using the Built-In Keyhole Wall Mount

600

Your ProMonitor

Use

a toggle boltorother similar very
the screw which the keyhole mount will hang on.
screw in the wall. Please note

also has a built-in keyhole wall-mount on the back.

well

anchored fastener in the wall to hold

Do

not use an unanchored

that

there is

an

optional pivoting wall mount

available which may be purchased separately.

Positioning Your ProMonitor 600

Your two ProMonitor 600 speakers which you are using as front speakers (please
note all ProMonitor 600s are exactly the same) should usually be placed 6 to 8 feet
apart and kept away from side walls and comers ifpossible. A good rule
place the speakers separated by one half the length
along, and each speaker one quarter the length
side walls.

Speakers may be angled in toward the listening position or pointed straight ahead.
Note: Angling the speakers in so that they point directly at the listeners will result
more detail and greater clarity.

Front

Speakers

9f

of

the wall they are positioned

of

the wall behind them away from the

thumbisto

in

Positioning Your ProMonitor 600 Rear/Side Surround Speakers

The surround speakers may be located on the side or behind the listeners. When
used on the sides, take care never to locate the speakers forward
speakers may be located at or above ear level.
wall follow the same guidelines given for positioning the front speakers along the wall.

Speakers may be angled in toward the listening position or pointed straight ahead.
Note: Angling the speakers in so that they point directly at the listeners will result in
more detail and greater clarity.

If

the speakers are placed on the rear

of

the listeners. The

Positioning Your ProCenter

The ProCenter 600 can be placed either aboveorbelow the TV.Ifyou are
putting the ProCenter 600 on a shelf
front

of

the speaker even with the frontofthe TV or the frontofthe shelf.

Pro

Center Vertical Angle Adjustment

Your ProCenter 600 loudspeaker has a simple built-in device which allows you
to adjust the vertical angle
side

of

the speaker thereisa foot.
lean back and rest
adjust the vertical angle
it aims directly towards the height

of

the foot. By varying how far you screw in the foot, you can

Subwoofer

Your Definitive Technology subwoofer has been designed to operate at frequencies
generally below 150 Hz. Because low-frequency information in this range essentially
is

non-directional, your subwoofer can be located anywhere in your listening room

that

is

most convenient. Also, the continuously variable low-pass filter operates at a
very fast roll-off, ensuring great performance wherever you place your subwoofer.
There are, however, some general rules that you should bear in mind when locating
your subwoofer:

of

the speaker. Please note that on the rear/center/under-

of

the speaker.

Placement

600

or

on a TV, try to place it forward with the

When

of

the listeners' ear.

Speaker

you set the speaker down, the speaker will

We

suggest that you aim the speaker so that

1.

For maximum output, the subwoofer should be placed in a comer or against the
wall, leaving roughly

2.

Comer
increase your system's maximum output and improve the dynamic capability
the subwoofer.

placement will increase the subwoofer's efficiency, which in tum will

2"-

3. While one Definitive Technology subwoofer will always sound great, the use

two subwoofers will definitely enhance your system's performance by providing
a smoother and more consistent response pattern. Here, it is recommended that
you locate the subwoofers on the same side
the same channel.

4"

clearance between the subwoofer and the waIl(s).

of

the room as the main speaker

of

of

of

4. Always remember that frequency response and output level are greatly influ-

of

enced by the subwoofer's placement. A movement
dramatically change your system's response characteristics. You should experi­ment with placement in your particular listening room in order to achieve the
highest performance from your subwoofer.

even a footortwo can

5. Your subwoofer contains a powerful amplifier inside its cabinetry. When plac-

ing the subwoofer into a built-in cabinet, please be sure it receives a clear flow
of

cooling air.Ifyour sub woofer is to be located in a closed-back cabinet, be
sure to put some ventilation holes in the cabinet back behind the subwoofer's
back panel.

Powering

Your subwoofer contains a built-in, active powered subwoofer section as well as
an electronic crossover and so each subwoofer must be plugged into an electrical
socket
plug on the end
the loudspeaker. The subwoofer has a special circuit which automatically turns the
powered subwoofer section on when a signal is fed to the loudspeaker and does not
require an on-off switch. The red LED on the back panel will light up when a signal
is sensed and the amplifier turns on. It will automatically
the signal is discontinued. -

subwoofer section on when a signal is fed to the loudspeaker and does not require an
on/offswitch. We suggest plugging the ProSub 60 into a circuit whichison all the
time and not into a switched outlet. When the ProSub 60 is plugged into a circuit and
receives AC current, initially you will hear a relatively loud pop which is completely
normal as the system first activates itselfto stand-by mode. Then, when a program
signal is fed to the speaker, it will fully activate itself with a lower level pop which is
normal.
tivate itself with a pop when

amplifier to actually turn
hour for the LED to tum off.

of

the appropriate voltage (as indicated on the backofyour unit) using the

The ProSub 600 has a special circuit which automatically turns the powered

If

you unplug the speakerortum

Please note that after the cessation

Up

of

the black cord attached to the electronics module on the back

Your

AC

off

from active to standby mode. It can also take up to an

Subwoofer

tum

off

a little while after

off

the AC current going to it, it will reac-

current is restored, which is normal.

of

a signal, it may take up to an hour for the

of

Subwoofer

Your Definitive Technology ProSub 600 subwoofer is equipped with a full comple-

of

ment
any installation. Most
sionally certain controls will require minor adjustments.

operating controls to ensure complete flexibility and maximum performance in

Operating

of

them basically are the "set and forget" type, although occa-

Controls

Level Control

This control varies how loud the subwoofer plays. Please follow the level control

suggestions in hook-up section.

Low-Pass Filter

Your subwoofer's back panel features a continuously variable low-pass filter.
you are using the low level LFE input, you will normally
Control all the way up to 150.
normally set the low-pass filter to between 10 and 12 o'clock. Always remember the
exact setting will vary with different rooms and different positions as well as personal
taste, so we encourage you to experiment.

If

you are using Method 1 System Hook-up you will

tum

the Low-Pass Filter

If

Troubleshooting

If

you experience any difficulties with your subwoofer, try the suggestions described

If

below.

Authorized Dealer for assistance.

1. Make sure all your system interconnects and power cords are solidly in
their place.

2.

Should you experience any levelofground hum or noise, try plugging the sub­woofer into the same circuit as your amplifier. Please note that some cable
hookups induce hum into the whole system and require a special isolation device.
Please consult your dealer.

you are still having problems, please consult your Definitive Technology

TV

3.

The system is provided with sophisticated internal protection circuitry.Iffor some
reason the protection circuitry is tripped, please
and wait five minutes before trying the system again.
heat, the system will

4.

Check tobesure that your power cord has not been damaged.

5.

Check that no foreign objectsorliquid has entered the cabinet.

6.Ifyou cannot get your subwoofer to
sure the system is set up properly, please bring the subwoofer to your Definitive
Technology Authorizeq Dealer for assistance.

tum

itself

turn

down your system's volume

If

the amplifier should over-

off

until the amplifier cools and resets.

turn

on orifno sound comes out and you're

Dolby

Digital

6.1

and

7.1 Systems

Some advanced surround sound receivers are now offering Dolby Digital

7.1. Basically, this allows you to add additional rear/side surround speakers for even

If

higher performance.
suggest that you use Definitive ProMonitors which are available at your Definitive
dealer. A Definitive ProCenter can also be used

you wish to add additional rear or side surround speakers

as

a rear center speakerin6.1

6.1

and
we

systems.

Technical Assistance

It is our pleasure to offer assistanceifyou have any questions regarding your
ProCinema System or its set-up. Please contact your nearest Definitive Technology
dealer or contact us directly at 410-363-7148 or [e-mail].

Service

Service and warranty work on your Definitive loudspeakers will normally be

performed by the Definitive Technology dealer from whom you have purchased

If,

your loudspeakers.
us first, describing the problem and requesting authorization as well as the location
of

the nearest factory service center. Please note

booklet
speakers be shipped to
obtaining return authorization.

is

the address of

however, you wish to return the speaker to us, please contact

that

the address given in this

our

offices only. Under no circumstances should loud-

our

officesorreturned without contacting us first and

Visit

us

Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117

Phone: [phone]

at

www.definitivetech.com

ProCinema

600

ProCinema 600 System

Overall

Frequency Response:
Recommended

Amplification:

System Specifications

22

Hz-

30 kHz

175 watts/channel

10 -

ProCenter

600

Dimensions:
Frequency Response:
Efficiency.:
Nominal Impedance:
Driver Complement:

Recommended
Amplification:

ProMonitor

600

Dimensions:
Frequency Response:
Efficiency:
Nominal Impedance:
Driver Complement:

Recommended
Amplification:

10

55

1

/z"
Hz-

W X 4

1

/4"

30 kHz

D x4" H

89 dB

Compatible with
Two 3
two 3
radiators,

10

4" W

65
88

Compatible with 4 - 8 ohm outputs
Two
one
radiator,1"pure aluminum dome tweeter

10

1

/4"

bass/midrange drivers coupled to

1

/4"

pressure-driven planar low frequency

1"

-

175

watts

1

X 4

/4"

Hz-

30 kHz

dB

1

3

/4"

bass/midrange drivers coupled to

3'/4"

pressure-driven planar low frequency

- 150 watts

4 - 8 ohm outputs

pure aluminum dome tweeter

D x7"H

ProSub 600

Dimensions:
Frequency Response:
Driver Complement:

Built-in Amplifier:
High Pass Filter:
Low Pass Filer:

3

10

/8"

W x

13"

D x

13"

H

22

Hz-150

One 8" woofer with polymer cone,
one 8" infrasonic radiator

Hz

250 watts RMS
6 dB/octave speaker level at

100Hz
24 dB/octave continuously variable
(40 Hz - 150 Hz)

All specifications subject to change.

Limited

USA

Warranty:

5-Years

3-Years

Definitive Technology warrants to the original retail purchaser only that this Definitive
Technology Loudspeaker Product (the "Product") will be free from defects in materials and
workmanship for a period
years for the electronic components from the date
Technology Franchised Dealer. However, this warranty will automatically terminate prior to

of

the expiration
components
party. The original retail purchaser shall hereinafter be referred to as "you." To obtain the war­ranty protection for your Definitive Technology Product(s), you must

Registration Card(s), within ten days

Defective Products must be shipped, together

insured to the Franchised Dealer from whom you purchased the Product, or to the nearest fac­tory service center. Product(s) must be shipped in the original shipping container or its equiva­lent; in any case the risk
tion at the Factory or a Definitive Technology Franchised Dealer, it is determined that the unit
was defective in materials or workmanship at any time during this Warranty period, Definitive

Technology or the Definitive Technology Franchised Dealer will, at its option, repair or

replace this Product at no additional charge, except as set forth below. All replaced parts and
Product(s) become the property
under this Warranty will be returned to you, within a reasonable time, freight collect.

five (5) years for the drivers and cabinets and three (3) years for the electronic

if

the original retail purchaser sells or otherwise transfers the Product to any other

of

of

for

Drivers

for

Electronic

five (5) years covering the drivers and cabinets. and three (3)

of

the dateofpurchase.

loss or damage in transit is to be borne by you. If, upon examina-

of

Definitive Technology. Product(s) replaced or repaired

and

Cabinets,

Components

of

the original purchase from a Definitive

fill

out the Warranty

with

proofofdateofpurchase, prepaid

This Warranty does not include service or parts to repair damage caused by accident, mis-

use, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage in
excess
utable to defects in materials or workmanship,
Product which has not been authorized by Definitive Technology.

dealers or outlets other than Definitive Technology Franchised Dealers. This Warranty is
purchases madeinthe
the authorized distributor

material
as provided above. In no event will Definitive Technology be liable to
consequential damages arising outofthe use

Technology
of
limitationofconsequential damages, so the above limitation may not applytoyou.

Warranty. Some states do notallow Limitation on how long an implied Warranty lasts, so the
above Limitations may not apply to you. This Warranty gives you specific legal rights,

also may have other rights which varyfrom state to state.

of

the rated maximumofthe unit, cosmetic appearanceofcabinetry not directly attrib-

Of

service, or repair or modificationofthe

to

Definitive TechnoLogy makes no Warranty with respect

US.

Warranty

for

the countryofpurchase.

This Warranty is

or

workmanship as warranted above, your sole remedy shall be repairorreplacement

or

a Definitive Technology Franchised Dealerhas been advisedofthe possibility

such damages, or

All implied warranties on the Product are Limited to the duration

in

lieuofall other expressed Warranties.Ifthis Product is defective in

for

any claim by any otherparty. Some states do not allow the exclusion

for

purchases made outsideofthe US are determined by

or

inability to use the Product, even ifDefinitive

its Products purchasedfrom

youfor

of

any incidental

this expressed

and

for

or

you

or

This product complies with the essential requirements

EMC

directives 89/336/EEC and 73/23/EEC (inclusive

93/68/EEC) and carries the

DVAT120406

C(

CE

mark accordingly.

of

of

•

~

-

You

could win a FREE powered subwoofer worth $400 retail value*

There

are

important

benefits to registering

your

new Definitive Technology

product:

• We'll automatically enter your name into a monthly

drawing

for a

FREE

$400 powered subwoofer*

• You'll have peace

of

mind

knowing that we have a permanent recordofyour product purchase for

warranty verification (with upload

of

receipt scan)

• You'll be assured

of

receiving service/upgrade alerts

•

It's

fast

and

easy

• Privacy. The data we gather during on-line registration is never sold

http://registration.definitivetech.com

*Definitive Technology ProSub 800orequivalent. See Official Rules for Details. No purchase necessary.
Sweepstakes void outside tile 50 United States and tile DistrictofColumbia, and where prohibited by law.

Failure to complete and submit tile product registration form does not diminish your warranty rights.
Warranties apply as stated in tile product manual. Please

be

sure to keep your original purchase

receipt

No

Internet access?

ProSub

800

Call Definitive Technology Customer Service M-F 9:30 AM - 6:30 PMUSEastern Standard Time at [phone], and we'll help you with the simple registration process.
Or you can send

us

a letter to Definitive Warranty Registration at the address below with your name, address, phone number, serial number(s)ofthe product(s) and

a photocopy

of

your sales receipt or upload a scan as partofthe on-line registration process. Your name will be entered into the drawing regardlessofhow you choose to register.

Dejjnitive

TechnnlDgy®

The

LeaderinHigh.Performance

Loudspeakersf;