An advanced controller with 3
independent counters - ideal for rate
monitoring and batching applications.
The PRO-CTR o ers a variety of advanced features,
including batching and batch counting, timed and
latched setpoints, and a range of customisable
operations and display settings.
›
3 independent hardware counters
Quadrature (x1, x2, x4), NPN, PNP, TTL sensors
›
Intelligent count modes
Choose from a variety of smart formulas to
suit your application
›
Optional dual display For simultaneous
viewing of multiple variables
›
Intuitive interface With scrolling text prompts
›
Up to 4 setpoints
›
Optional 4–20mA or 0–10V analog output
›
Optional RS232/RS485 serial port
PRO-CTR100/200
Counter/Rate Batching Controller
Speci cations
Input
Sensor type Quadrature (x1, x2, x4), NPN, PNP or TTL
3 x counter inputs available
Input 0–24V DC, 0–30V AC
Power supply
HV= 85–265V AC / 95–370V DC, or
LV= 15–48V AC / 10–72V DC
Excitation
Default: 24V DC (50mA max)
Optional: 5V DC (200mA max)
Counter
Count modes Quad x1/x2/x4, A+B, A–B, A/B Independent,
Up/Down, C Count, Reset to o set A B, Reset to o set
and start A B
Input frequency
10kHz: Quad x4, A+B, A–B, A/B Ind, Up/Down,
RSOFAB, RSOFST
20kHz: Quad x1, Quad x2
38kHz: C Count
Rate
Input frequency 20kHz max
Minimum pulse width Must be > 5μs
Sampling rate 100msec
Resolution 0.01Hz
Accuracy 0.005%
Temperature dri Typically 2ppm/°C
Relay Output
Number of relay outputs None, 2 or 4
Relay output type 5A form A (3A 240V AC max or 3A 30V
DC max)
Analog Output
Number of analog outputs None or 1
Analog output type Isolated 16 bit 4–20mA/0–10V
Sampling rate 10msec
1
Comm Port
Programming
Number of comm ports None or 1
Comm port options
S2R= Isolated RS232, RJ terminal, or
S4S= Isolated RS485, screw terminal
Serial output Custom ASCII, Modbus RTU slave or Ranger A
Data rate 1200–115k2 baud
Parity Odd, even or none
Display
Display type 14 segment alphanumeric LED display, 5
buttons
LED indicators 6 setpoint LED’s
PRO-CTR100 1 x 6 digits 13mm (0.5″)
PRO-CTR200 2 x 6 digits 10mm (0.4″)
Display range 0.1 to 99999.9
PRO-CTR Product Codes
Front panel buttons Up, Down, P (Prog/Enter), plus 2
Menu buttons (F)
Security Input and setpoint setups are independently
accessible and PIN protected
Construction
Casing Panel mount case
Ingress protection rating IP65 dust/splash proof (face
only)
Dimensions (H x W x D) 48 x 96 x 120mm
(1.89 x 3.78 x 4.72″)
Panel cutout 45 x 92mm (1.77 x 3.62″)
PRO-CTR
Counter/Rate Batching Controller
-100
Single display: 1 x 6 digits 13mm (0.5″)
-200 Dual display: 2 x 6 digits 10mm (0.4″)
No relay output
-R2 2x relay outputs
-R4 4x relay outputs
No analog output
-A Analog output 4–20mA / 0–10V
No serial output
-S2R Isolated RS232, RJ terminal
-S4S Isolated RS485, screw terminal
Copyright © 2016 De ne Instruments Ltd
PRO-CTR-DS-16V02 (0128)
PRO-CTR100/200
New Zealand (Head O ce)
Ph: +64 (9) 835-1550
sales@de neinstruments.co.nz
www.de neinstruments.co.nz
United States (Dallas, TX)
Ph: (214) 926 4950
sales@de neinstruments.com
www.de neinstruments.com
2
South Africa (Johannesburg)
Ph: 087 945 2700
sales@de neinstruments.co.za
www.de neinstruments.co.za
Loading...