
Defibtech AED
Training Equipment
- Standalone AED Trainer
- Training Battery Pack System
- Semi and Fully Automatic Version
User Manual
ELECTRONIC
DISTRIBUTION
DAC-515E-EN-BD

Notices
Defibtech shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use
of this material.
Information in this document is subject to change without notice. Names and
data used in the examples are fictitious unless otherwise noted.
Limited Warranty
The information in the Defibtech AED User Manual does not constitute any
warranty as to the Defibtech AED or any related products. The “Limited
Warranty” shipped with Defibtech AED products serves as the sole and
exclusive warranty provided by Defibtech L.L.C. with respect to these products.
Copyright
Copyright 2013 Defibtech, L.L.C.
All rights reserved. No part of this documentation may be reproduced or
transmitted in any form by any means without the express written consent of
Defibtech, L.L.C.
DAC-515E-EN-BD (2013 -10 - 02 )

Contents
1 Introduction to Defibtech AED Training Products ..............1
2 Training Equipment Components & Preparation .................2
2.1 Common Components ............................................................2
2.1.1 DBP-RCX series Training Battery Pack ........................................................... 2
2.1.2 DTR-4XX series Remote Control .................................................................... 2
2.1.3 Training Pads .................................................................................................. 2
2.2 Standalone AED Trainer .........................................................3
2.3 Training Battery Pack System ..............................................3
2.3.1 Configuring a Defibtech DDU-100 series AED as a Trainer ........................... 3
3 Training Scenarios ...............................................................4
3.1 AED Modes (Semi-Automatic and Fully Automatic) ..............4
3.2 Configuring the AED Mode
(Semi-Automatic or Fully Automatic) .....................................4
3.3 Available Scenarios ................................................................5
3.4 The Default Training Scenario ................................................5
3.5 Programming the Default Scenario .......................................6
3.5.1 Programming the Default Scenario Without the Remote Control ................. 6
3.5.2 Programming the Default Scenario With the Remote Control ...................... 6
4 Remote Control Commands ................................................7
5 Using the Remote Control With Multiple AEDs ..................8
5.1 Assigning Unique Names to AEDs..........................................8
5.2 Removing Unique Names from AEDs .....................................8
6 Notice to European Union Customers ................................9
7 Contacts .............................................................................10
DAC-515E-EN-BD

1 Introduction to Defibtech AED Training Products
Defibtech offers two equipment options for training students in the use of its
AEDs:
The “Standalone AED Trainer” is a dedicated training AED package that
is externally similar to a fully-functional Defibtech AED, but has bright red
overmolding to clearly distinguish it as a training device. It cannot be used to
defibrillate patients. A Remote Control is provided with the Standalone AED
Trainer, which allows the instructor to control training exercises and AED functions
from a distance.
The “Training Battery Pack System” is a rechargeable training battery pack and
training software (provided on a small data card) that allows a fully-functional
Defibtech DDU-100 series AED to be converted to a training device. The Remote
Control is an optional part of this package.
The functional details of these two equipment options are identical during training
operations. Discussion of these details begins in section 3.
1
DAC-515E-EN-BD