Defiant 1002-241-274 User Manual
Item #1002-241-274
1
10
11
11
10
9
8
7
6
5
4
3
2
1
T
I
M
E
N
O
W
OUTLET
ON
TIMER
ON
Safety Information
Product Description
Operating Instructions
USE AND CARE GUIDE
INDOOR TIMER
11
10
1
2
3
4
5
6
7
8
9
Questions, problems, missing parts? Before returning to the store,
call Deant Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-844-871-8796
HomeDepot.com
We appreciate the trust and condence you have placed in
Deant through the purchase of this indoor timer. Visit us
online to see our full line of products available for your home
improvement needs. Thank you for choosing Deant!
THANK YOU
Operating Instructions (Continued)
9
8
T
I
M
E
N
7
O
W
6
5
4
3
2
10
1
11
WARNING: RISK OF ELECTRIC SHOCK:
Plug directly into an electrical outlet
Do not use in wet locations
Use indoors only
Unplug timer before cleaning
Keep children way
WARNING: RISK OF ELECTRIC FIRE:
Do not use to control appliances that contain heating
elements such as cooking appliances, heaters, and irons
Do not exceed electrical ratings
Do not use with extension cords
CAUTION: DO NOT PLUG IN MORE THAN THE RATED LOAD
(SEE RATINGS). Find the total watts being used: If watts are not
marked on the appliance, multiply ampere rating (on nameplate)
by 125 volts to determine equivalent watts. For lamps with
multiple bulbs, add the wattage on the bulbs.
NOTE: This is a POLARIZED device. It has a polarized plug (one
blade is wider than the other) and two polarized outlets (one slot
is longer than the other). The polarized plug is not intended to be
mated with non-polarized outlets (where both slots are the same
size). A polarized outlet is intended to mate with a polarized plug
in only one way—the longer slot with the wider blade.
RATINGS
125 VAC, 60Hz
15 A General Purpose / Resistive
1250 W (10A) Tungsten
½ HP
4
11
10
1
2
3
4
5
6
7
8
9
1. TIMER SEGMENT BUTTONS: These segments, each representing 30
minutes, can be pushed down from the edge of the dial, and are used to
program the timer ON/OFF times.
2. ROTATING TIMER DIAL: This dial can be turned only clockwise. It points
to the current time of day on the Time Readout.
3. TIME READOUT: Displays each hour of the day (nighttime hours are
shown with a shaded background, while daylight hours are shown
with white).
4. MASTER SWITCH: TIMER ON=Activates timer control of the device
being used, OUTLET ON=Overrides the timer and enables normal use
of the outlet.
9
8
T
I
M
E
N
7
O
W
6
5
4
3
2
10
1
11
Troubleshooting
1
2
3
Programming ON/OFF times
1
NOTE: Ensure all segments are pulled up before programming.
Select a time period (or periods) you want the device turned on.
Push down ALL the segments (1) that fall on or within that time
period. You may need to turn the dial clockwise to access the
desired segments.
Turn the rotating timer dial (2) clockwise until the pointer on the face
of the dial points to the current time of day.
1
2
NOTE: Nighttime hours (from 6:30PM to 6:30AM) are highlighted
with a grey background.
Preparing the timer for use
2
Plug the device into the outlet on the sides of the timer.
Ensure the device is switched ON for automatic control. (The timer will
not turn the device ON if the device is switched OFF.)
11
10
1
2
9
8
T
I
M
E
N
7
O
W
6
5
4
9
3
2
10
1
11
3
4
5
6
7
8
NOTE: To override the timer and use your device normally,
set the master switch to the OUTLET ON position. This will
deactivate timer control of the device. To reactivate timer
control, ensure the device is turned ON, and set the timer master
switch to TIMER ON. In case of power failure, reset the time of
day as explained in step 1.
Using the timer
3
Set the master switch (4) to the TIMER ON position.
Plug the timer into an electrical outlet nearest to the device to be
controlled.
The device will now turn ON and OFF at the programmed times for both
outlets simultaneously.
OUTLET
ON
TIMER
ON
4
Problem Solution
The pins cannot be pushed down. Ensure the pins are not already down or
The device does not turn ON. Ensure the device power switch is in the
The device turns ON/OFF during the
day instead of night (or night instead
of day).
The device turns ON early or late. Manually turn the rotating timer dial to
in the “TIME NOW” range (shown on the
rotating timer dial).
ON position.
Ensure the AM/PM time and program
settings are correct.
cycle the timer ON or OFF at the correct
time.
Questions, problems, missing parts?
Before returning to the store,
call Deant Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-844-871-8796
HOMEDEPOT.COM
Loading...