How it Works
Defender Security
Loading...
82-20230
User Manual
236 pgs7.55 Mb0

Defender Security 82-20220, 82-20225, 82-20230 User Manual

HDCVI Standalone DVR User’s Manual
V1.1.0
for model# 82-20220, 82-20225 & 82-20230
2
Table of Contents
1 FEATURES AND SPECIFICATIONS ..............................................................10
1.1 Overview ...................................................................................................................................................10
1.2 Features ....................................................................................................................................................10
1.3 Specifications ..........................................................................................................................................11
1.3.1 Advanced 1080P (V2) 1U Series ................................................................................................11
1.3.2 General 720P（S2）1U / Special 16-ch General 720P（S2）1U Series....................13
2 OVERVIEW AND CONTROLS ...................................................................... 15
2.1 Front Panel.............................................................................................................................................15
2.1.1 82-20220 & 82-20225 ...........................................................................................................15
2.1.2 82--20230
................................
...........................................................................................................17
2.2 Rear Panel .............................................................................................................................................17
2.2.1 82-20220 & 82-20225 17
2.2.2 19
2.3 Connection Sample.............................................................................................................................21
...........................................................................................................
82--20230
................................
................................................................
................................
3
2.3.1 82-20220 & 82-20225
2.3.2
2.4 Remote Control ....................................................................................................................................22
2.5 Mouse Control.......................................................................................................................................24
2.6 Virtual Keyboard & Front Panel ......................................................................................................26
2.6.1 Virtual Keyboard .............................................................................................................................26
2.6.2 Front Panel .......................................................................................................................................26
3 INSTALLATION AND CONNECTIONS ........................................................ 27
3.1 Check Unpacked DVR .......................................................................................................................27
3.2 About Front Panel and Real Panel ................................................................................................27
3.3 HDD Installation....................................................................................................................................37
3.4 Connecting Power Supply ................................................................................................................28
3.5 Connecting Video Input and Output Devices .............................................................................29
3.5.1 Connecting Video Input ................................................................................................................29
3.5.2 Connecting Video Output.............................................................................................................29
3.6 Connecting Audio Input & Output, Bidirectional Audio ...........................................................30
3.6.1 Audio Input ........................................................................................................................................30
21
...........................................................................................................
22
82--20230
................................
................................................................
................................
4
3.6.2 Audio Output ....................................................................................................................................30
3.7 Alarm Input and Output Connection ..............................................................................................30
3.7.1 Alarm Input and Output Details..................................................................................................31
3.7.2 Alarm Input Port ..............................................................................................................................32
3.7.3 Alarm Output Port...........................................................................................................................32
3.8 RS485 ......................................................................................................................................................33
3.9 Other Interfaces....................................................................................................................................34
4 OVERVIEW OF NAVIGATION AND CONTROLS...................................... 34
4.1 Boot up and Shutdown.......................................................................................................................34
4.1.1 Boot up ...............................................................................................................................................34
4.1.2 Shutdown...........................................................................................................................................34
4.1.3 Auto Resume after Power Failure.............................................................................................34
4.1.4 Replace Button Battery.................................................................................................................34
4.2 Startup Wizard ......................................................................................................................................35
4.3 Manual Record .....................................................................................................................................38
4.3.1 Live Viewing .....................................................................................................................................38
4.4 Right -Click Menu..................................................................................................................................40
4.4.1 Window Switch ................................................................................................................................41
4.4.2 PTZ Control ......................................................................................................................................41
4.4.3 Color....................................................................................................................................................47
4.4.4 Search ................................................................................................................................................49
4.4.5 Record Control ................................................................................................................................49
4.4.6 Alarm Output ....................................................................................................................................49
4.4.7 Remote Device ................................................................................................................................49
4.5 Navigation Bar ......................................................................................................................................49
4.5.1 Main Menu ........................................................................................................................................49
4.5.2 Output Screen..................................................................................................................................49
4.5.3 Favorites ............................................................................................................................................49
5
4.5.4 Tour .....................................................................................................................................................50
4.5.5 PTZ ......................................................................................................................................................50
4.5.6 Color....................................................................................................................................................50
4.5.7 Search ................................................................................................................................................50
4.5.8 Alarm Status .....................................................................................................................................50
4.5.9 Channel Info .....................................................................................................................................50
4.5.10 Remote Device...........................................................................................................................51
4.5.11 Network.........................................................................................................................................51
4.5.12 HDD Manager.............................................................................................................................51
4.5.13 USB Manager .............................................................................................................................51
4.6 USB Device Auto Pop-up..................................................................................................................51
4.7 Main Menu..............................................................................................................................................52
4.8 Operation ................................................................................................................................................52
4.8.1 Search ................................................................................................................................................52
4.8.2 Backup................................................................................................................................................62
4.8.3 Shut Down.........................................................................................................................................62
4.9 Information .............................................................................................................................................62
4.9.1 System Info .......................................................................................................................................62
4.9.2 Event ...................................................................................................................................................66
4.9.3 Network ..............................................................................................................................................67
4.9.4 Log .......................................................................................................................................................69
4.10 Settin g......................................................................................................................................................71
4.10.1 Camera .........................................................................................................................................71
4.10.2 Network...................................................................................................................................... 81
4.10.3 Event........................................................................................................................................... 99
4.10.4 Storage ...................................................................................................................................... 113
4.10.5 System ....................................................................................................................................... 126
5 WEB OPERATION ......................................................................................... 147
5.1 Network Connection......................................................................................................................... 147
5.2 Login...................................................................................................................................................... 147
6
5.3 LAN Mode............................................................................................................................................ 148
5.4 Real-time Mo nitor.............................................................................................................................. 150
5.5 PTZ ........................................................................................................................................................ 151
5.6 Image/Relay-out ................................................................................................................................ 152
5.6.1 Image ............................................................................................................................................... 152
5.6.2 Relay output .................................................................................................................................. 152
5.7 WAN Login .......................................................................................................................................... 153
5.8 Setup ..................................................................................................................................................... 154
5.8.1 Camera............................................................................................................................................ 154
5.8.2 Network ........................................................................................................................................... 161
5.8.3 Event ................................................................................................................................................ 177
5.8.4 Storage............................................................................................................................................ 185
5.8.5 Setting ............................................................................................................................................. 189
5.9 Information .......................................................................................................................................... 203
5.9.1 Version ............................................................................................................................................ 203
5.9.2 Log .................................................................................................................................................... 203
5.9.3 Online User .................................................................................................................................... 204
5.10 Playback............................................................................................................................................... 205
5.11 Alarm ..................................................................................................................................................... 208
5.12 Log out.................................................................................................................................................. 209
5.13 Un-install Web Control .................................................................................................................... 210
6 PROFESSIONAL SURVEILLANCE SYSTEM .......................................... 210
7
7 FAQ .................................................................................................................. 211
APPENDIX A HDD CAPACITY CALCULATION............................................ 219
APPENDIX B COMPATIBLE BACKUP DEVICES ........................................... 221
Appendix B-1 Compatible USB list .......................................................................................................... 221
Appendix B-2 Compatible SD Card list ................................................................................................. 222
Appendix B-3 Compatible Portable HDD list....................................................................................... 222
Appendix B-4 Compatible USB DV D List ............................................................................................. 222
Appendix B-5 Compatible SATA DVD List ........................................................................................... 222
Appendix B-6 Compatible SATA HDD List .......................................................................................... 223
APPENDIX C COMPATIBLE CD/DVD BURNER LIST ................................ 227
APPENDIX D COMPATIBLE DISPLAYER LIST............................................ 228
APPENDIX E COMPATIBLE SWITCHER ......................................................... 229
APPENDIX F COMPATIBLE WIRELESS MOUSE LIST.............................. 230
APPENDIX G EARTHING .................................................................................. 231
8
Welcome
This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series standalone DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully!
Thank you for purchasing
HDCVI DVR!
Defender Security
9
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
3．Installation
Keep upwards. Handle with care. Do not apply power to the DVR before completing installation. Do not place objects on the DVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc.
6. Accessories
Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery Improper battery use may result in fire, explosion, or personal injury! When replace the battery, please make sure you are using the same model!
10
1 FEATURES AND SPECIFICATIONS
1.1 Overview
The hybrid standalone series DVR is an excellent digital monitor product designed for security field.
It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame play function is suitable for detailed analysis. It has various functions such as record, playback, monitor at the same time and can guarantee audio video synchronization. This series product has advanced technology and strong network data transmission function.
This series device adopts embedded design to achieve high security and reliability. It can work in the local end, and at the same time, when connecting it to the professional surveillance software (PSS), it can connect to the security network to realize strong network and remote monitor function.
This series product can be widely used in various areas such as banking, telecommunication, electric power, interrogation, transportation, intelligent resident zone, factory, warehouse, resources, and water conservancy.
1.2 Features
This series product has the following features:
Real-time surveillance Support VGA port and HDMI port. Realize the surveillance through displayer. Support HDMI, VGA, and TV output at the same time.
Storage function Special data format to guarantee data security and can remove the risk of the vicious data modification. Support digital watermark.
Compression format Support multiple-channel audio and video. An independent hardware decodes the audio and video signal from each channel to maintain video and audio synchronization.
Backup function Support backup operation via USB port (such as U disk, portable HDD, burner) Client-end user can download the file to local HDD to backup via network.
Record & playback function
11
Support each channel real-time record independently, and at the same time it can support search, forward play, network monitor, record search, download and etc. Support various playback modes: slow play, fast play, backward play and frame by frame play. Support time title overlay so that you can view event accurate occurred time Support customized zoom function during the preview.
Network operation Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function Several relay alarm outputs to realize alarm activation and on-site light control. The alarm input port and output has the protection circuit to guarantee device safety.
Communication port RS485 port can realize alarm input and PTZ control. RS232 port can connect to keyboard to realize central control, and can also connect to PC COM to upgrade system and realize maintenance, and matrix control. Standard Ethernet port can realize network access function. The dual-network port has the multiple-access, fault-tolerance, load-balance setup mode.
PTZ control Support PTZ decoder via RS485.
Intelligent operation Mouse operation function In the menu, support copy and paste setup function
UPNP (Universal Plug and Play) Establish mapping connection between LAN and WAN via UPNP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
1.3.1 Advanced 1080P 1U Serie 82-20220 & 82-20225s
Model Parameters 4-ch
8-ch
System Main Processor High-performance industrial embedded micro controller
OS Embedded LINUX
12
Video Video Encode
Standard
H.264
Encode Resolution
1080P /720P/960H/D1/HD1/2CIF/CIF/QCIF (for sub-stream only)
Video Frame Rate
PAL:1~25f/s；NTSC：1~30f/s
Video Bit Rate 2048Kbps-6144Kbps Kbps-4096Kbps，
For 1080P:default value is 4Mbps，max value is 6Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream Support
Audio Encode
Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate 64Kbps
Video Port Analog Video
Input
4-ch, BNC port 8-ch, BNC port
Network Video Input
Switch 2 analog channels to the IP channels（16Mbps）
Video Output 1-ch VGA output,
1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output N/A Matrix Output N/A
Audio Port Audio Input 4-ch，RCA port, audio via coaxial cable
Audio Output 1-ch，RCA port Bidirectional
Support（Reuse the audio port）
Model Parameters 4-ch
8-ch
Record Record Mode Auto record, manual record, motion detect record, alarm record
Record Playback
Max 4-ch playback Max 16-ch playback
Backup Mode HDD, burner, flash disk, network backup.
Alarm Alarm Input 4-ch alarm input 16-ch alarm input
Alarm Output 3-ch alarm output
13
HDD HDD Port 2 SATA ports. Does not support eSATA port.
Space/HDD 6TB
Communication Port
Network 1 RJ45 port, 1000Mbps Ethernet port Communication RS485 port USB 2 USB ports
Other Power DC12V
Power Consumption
≤30W（exclude HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension 1U case，375mm（W）×280mm（D）×50mm（H） Weight 1.5kg～2.5kg（exclude HDD） Installation
Mode
Desk installation
1.3.2 82-20230 1U Series
Model Parameters
System Main Processor High-performance industrial embedded micro controller
OS Embedded LINUX
Video Video Encode
Standard
H.264
Encode Resolution
1080P(1-15fps) /720P/960H/D1/HD1/2CIF/CIF/QCIF
Video Frame Rate
HDCVI：1~25f/s（PAL）； 1~30f/s（NTSC） CVBS：1~25f/s（PAL）； 1~30f/s（NTSC）
Video Bit Rate 2048Kbps-4096Kbps
For 1080P/720P:default value is 2Mbps，max value is 4Mbps For 960H:default value is 1Mbps，max value is 3Mbps
Bit Stream Type
Video stream/composite stream
Dual-Stream Support
Audio Encode
Standard
G.711A, G.711U, PCM
Audio Sampling Rate
8KHz，16Bit
Audio Bit Rate 64Kbps
82-20230
14
Video Port Analog Video
Input
16-ch, BNC port
Network Video Input
Max 2 IPC connections（8Mbps）
Video Output 1-ch VGA output,
1-ch HDMI output， HDMI/ VGA video output at the same time (VGA/HDMI of the same video source)
Loop Output N/A Matrix Output N/A
Audio Port Audio Input 4-ch，RCA port, audio via coaxial cable
Audio Output 1-ch，RCA port Bidirectional Talk Input
Support（Reuse the audio port）
Record Record Mode Auto record, manual record, motion detect record, alarm record
Record Playback
Max 16-ch Playback
Backup Mode HDD, burner, flash disk, network backup.
Alarm Alarm Input
16-ch alarm input
Alarm Output 3-ch alarm output
HDD HDD Port 2 SATA ports. Does not support eSATA port.
Space/HDD 4T
Communication Port
Network 1 RJ45 port, 100Mbps Ethernet port Communication RS485 port USB 2 USB ports
Other Power DC12V/4A
Power Consumption
≤30W（No HDD）
Working Temperature
-10℃－＋55℃
Working Humidity
10%~90%
Dimension 1U case，375mm（W）×280mm（D）×50mm（H） Weight 1.5-2.5kg（No HDD） Installation
Mode
Desk installation
15
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series DVR for the first time, please refer to this part first.
2.1 Front Panel
2.1.1 82-20220 & 82-20225
The front panel is shown as below. See Figure 2-1.
Figure 2-1
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button
Power button, press this button for three seconds to boot up or shut down DVR.
Shift Shift
In textbox, click this button to switch between numeral, English(Small/Capitalized),donation and etc.
Up/1Down/4 、
Activate current control, modify setup, and then move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu. In text mode, input number 1/4 (English character G/H/I)
Left/2 Right/3
Shift current activated control,
When playback, click these buttons to control playback bar. In text mode, input number 2(English character A/B/C) /3(English character D/E/F)
ESC ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter ENTER
Confirm current operation Go to default button Go to menu
Record REC
Manually stop/start recording, working with direction keys or numeral keys to select the recording channel.
16
Slow play/8
Multiple slow play speeds or normal playback. In text mode, input number 8 (English character T/U/V).
Assistant Fn
One-window monitor mode, click this button to display assistant function: PTZ control and image color.
Backspace function: in numeral control or text control, press it for 1.5seconds to delete the previous character before the
In motion detection setup, working with Fn and direction keys to realize setup.
In text mode, click it to switch between numeral, English character(small/capitalized) and etc.
Realize other special functions.
Fast play/7
Various fast speeds and normal playback. In text mode, input number 7 (English character P/Q/R/S).
Play previous/0 |
In playback mode, playback the previous video In text mode, input number 0.
Reverse/Pause/6 ||
In normal playback or pause mode, click this button to reverse playback In reverse playback, click this button to pause playback.
Play Next/9 |
In playback mode, playback the next video In menu setup, go to down ward of the dropdown list. In text mode, input number 9 (English character W/X/Y/Z)
Play/Pause /5 ||
In normal playback click this button to pause playback In pause mode, click this button to resume playback. In text mode, input number 5(English character J/K/L).
USB port
To connect USB storage device, USB mouse.
Network abnormal indication light
Net
Network error occurs or there is no network connection, the light becomes red to alert you.
HDD abnormal indication light
HDD
HDD error occurs or HDD capacity is below specified threshold value, the light becomes red to alert you.
Record light 1-16
System is recording or not. It becomes on when system is recording.
IR Receiver IR
It is to receive the signal from the remote control.
17
2.1.2
The front panel is shown as below. See Figure 2-2.
Figure 2-2
Please refer to the following sheet for front panel button information.
SN Name Function
1
HDD status indictor light
The red light becomes on when HDD is abnormal.
2 Power indicator light
The red light becomes on when the power connection is OK.
3
Network status indicator light
The red light becomes on when the network connection is abnormal.
82-20230
2.2 Rear Panel
2.2.1 82-20220
This series products’ rear panel is shown as below. See Figure 2-5. The following figure is based on the 4-channe advanced 82-20220
Figure 2-5
Please refer to the following sheet for detailed information.
18
SN Icon Name Note 1
Power switch Power on/off button.
2 1～4 Alarm input
port 1～4
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR have the same ground.
NO1～NO3 Alarm output
port 1～3
3 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO：Normal open alarm output port.  C：Alarm output public end.
C1～C3
3
Power input port
Input DC 12V/5A.
4 AB RS-485
communicati on port
RS485_A port. It is the cable A. You can connect
to the control devices such as speed dome PTZ.
RS485_B.It is the cable B. You can connect to
the control devices such as speed dome PTZ.
5 AUDIO IN
Audio input port
It is to receive the analog audio signal output from the devices such as mike phone, pickup.
6 VIDEO IN
Video input port
Connect to analog camera to input video signal.
7
GND Alarm input ground port.
8 AUDIO
OUT
Audio output port
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
9 HDMI High
Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
10
USB2.0 port USB2.0 port. Connect to mouse, USB storage device,
USB burner and etc.
11 VGA VGA video
output port
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
12 Network port 1000M Ethernet port
19
2.2.2 82-20230
This 16-channel general 720P（S2）1U products’ rear panel is shown as below. See Figure 2-12.
Figure 2-12
Please refer to the following sheet for detailed information.
SN Icon Name Note 1
Power switch Power on/off button.
2 1～8(16) Alarm input
port 1～8(16)
There are two types; NO (normal open)/NC
(normal close).
When your alarm input device is using external
power, please make sure the device and the DVR have the same ground.
NO1～NO3 Alarm output
port 1～3
3 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～ C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
NO：Normal open alarm output port. C：Alarm output public end.
C1～C3
3 VGA VGA video
output
port
VGA video output port. Output analog video signal. Can connect to the monitor to view ananlog video output.
20
SN Icon Name Note 4 AUDIO IN Audio input
port
Connect to audio input device such as speaker.
5 VIDEO IN Video input
port
Connect to analog camera, video input signal.
6
GND Alarm input ground port.
7
Power input port
Input 12V DC.
8
USB2.0 port Connect to USB storage device, mouse, burning
DVD-ROM and etc.
9 A RS485
（ RS-485 ） communicati on port
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
B RS485_B.It is the cable B. You can connect to the
control devices such as speed dome PTZ.
10 HDMI High
Definition Media Interface
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device.
11
Network port
100M Ethernet port
12 AUDIO
OUT
Audio output port
Connect to video output device such as sound box.
When connect the Ethernet port, please use crossover cable to connect the PC and use the straight cable to connect to the switch or router.
21
Figure 2-18
2.3 Connection Sample
2.3.1 82-20220 & 82-20225
Please refer to the following figure for detailed information. See Figure 2-18. The following interface is based on the 4-channel advanced 1080P 82-20220
22
2.3.2 General 82-20230
The connection sample is shown as below. See Figure 2-20 The following interface is based on the 8-channel general （S2）1U series product.
Figure 2-20
2.4 Remote Control
The remote control interface is shown as in Figure 2-24. Please note remote control is not our standard accessory and it is not included in the accessory bag.
23
Figure 2-24
Serial Number Name Function 1 Power button Click it to boot up or shut down
the device.
2 Address Click it to input device number, so
that you can control it.
3 Forward Various forward speeds and
normal speed playback.
4 Slow play Multiple slow play speeds or
normal playback.
5
Next record In playback mode, playback the
next video.
6
Previous record In playback mode, playback the
previous video.
7 Play/Pause In pause mode, click this button
to realize normal playback. In normal playback click this button to pause playback. In real-time monitor mode, click this button to enter video search menu.
Reverse/pause Reverse playback pause mode,
24
8 click this button to realize normal
playback. In reverse playback click this button to pause playback.
9
Esc. Go back to previous menu or
cancel current operation (close upper interface or control)
10 Record Start or stop record manually
In record interface, working with the direction buttons to select the record channel. Click this button for at least 1.5 seconds, system can go to the Manual Record interface.
11 Direction keys Switch current activated control,
go to left or right. In playback mode, it is to control the playback process bar. Aux function(such as switch the PTZ menu)
12 Enter /menu key go to default button
go to the menu
13 Multiple-window switch Switch between multiple-window
and one-window.
14 Fn In 1-ch monitor mode: pop up
assistant function： PTZ control and Video color. Switch the PTZ control menu in PTZ control interface. In motion detection interface, working with direction keys to complete setup. In text mode, click it to delete character.
15 0-9 number key Input password, channel or
switch channel. Shift is the button to switch the input method.
2.5 Mouse Control
Left click mouse
System pops up password input dialogue box if you have not logged in. In real-time monitor mode, you can go to the main menu.
25
When you have selected one menu item, left click mouse to view menu content.
Implement the control operation. Modify checkbox or motion detection status. Click combo box to pop up drop down list In input box, you can select input methods. Left click the corresponding button on the panel you can input numeral/English character (small/capitalized). Here ← stands for backspace button. ＿ stands for space button.
In English input mode: _stands for input a backspace icon and ← stands for deleting the previous character.
In numeral input mode: _ stands for clear and ← stands for
deleting the previous numeral.
When input special sign, you can click corresponding numeral in the front panel to input. For example, click numeral 1 you can input“/” , or you can click the numeral in the on-screen keyboard directly.
Double left click mouse
Implement special control operation such as double click one item in the file list to playback the video.
In multiple-window mode, double left click one channel to view in full-window. Double left click current video again to go back to previous multiple-window mode.
26
Right click mouse
In real-time monitor mode, pops up shortcut menu: one-window, four-window, nine-window and sixteen-window, Pan/Tilt/Zoom, color setting, search, record, alarm input, alarm output, main menu. Among which, Pan/Tilt/Zoom and color setting applies for current selected channel. If you are in multiple-window mode, system automatically switches to the corresponding channel.
Exit current menu without saving the modification. Press middle button
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Page up or page down Move mouse
Select current control or move control
Drag mouse
Select motion detection zone
Select privacy mask zone.
2.6 Virtual Keyboard & Front Panel
2.6.1 Virtual Keyboard
The system supports two input methods: numeral input and English character (small and capitalized) input. Move the cursor to the text column, the text is shown as blue, input button pops up on the right. Click that button to switch between numeral input and English input (capitalized and small), Use > or < to shift between small character and capitalized character.
2.6.2 Front Panel
Move the cursor to the text column. Click Fn key and use direction keys to select number you wanted. Please click enter button to input.
27
3 Installation and Connections
Note: All the installation and operations here should conform to your local electric safety rules.
3.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the DVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list. Finally you can remove the protective film of the DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.
3.2 About Front Panel and Real Panel
The model in the front panel is very important; please check according to your purchase order. The label in the rear panel is very important too. Usually we need you to represent the serial number when we provide the service after sales.
3.3 HDD Installation
Important Shut down the device and then unplug the power cable before you open the case to replace the HDD! All figures listed below for reference only!
This series DVR has 1 to 8 HDDs (no limitation for capacity). Please use HDD of 7200rpm or higher. Usually we do not recommend the HDD for the PC. You can refer to the Appendix for recommended HDD brand. Please follow the instructions listed below to install hard disk.
①Loosen the screws of the upper cover
②Fix four screws in the HDD (Turn ③Place the HDD in accordance
28
and side pane just three rounds). with the four holes in the bottom.
④Turn the device upside down and
then turn the screws in firmly.
⑤Fix the HDD firmly. ⑥Connect the HDD cable and
power cable.
⑦Put the cover in accordance with the
clip and then place the upper cover back.
⑧Secure the screws in the rear panel
and the side panel.
3.4 Connecting Power Supply
Please check input voltage and device power button match or not. We recommend you use UPS to guarantee steady operation, DVR life span, and other peripheral equipments operation such as cameras.
29
3.5 Connecting Video Input and Output Devices
3.5.1 Connecting Video Input
The video input interface is BNC. The input video format includes: PAL/NTSC BNC （1.0VB
P- P ，
B75Ω.）.
The input video format: BNC（0.8VP-P，75Ω）, The video signal should comply with your national standards. The input video signal shall have high SNR, low distortion; low interference, natural color and suitable lightness.
Guarantee the stability and reliability of the camera signal:
The camera shall be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. The camera and the DVR should have the same grounding to ensure the normal operation of the camera.
Guarantee stability and reliability of the transmission lineBTTTB
Please use high quality, sound shielded BNC. Please select suitable BNC model according to the transmission distance. If the distance is too long, you should use twisted pair cable, and you can add video compensation devices or use optical fiber to ensure video quality. You should keep the video signal away from the strong electromagnetic interference, especially the high tension current.
Keep connection lugs in well contactBTTTB
The signal line and shielded wire should be fixed firmly and in well connection. Avoid dry joint, lap welding and oxidation.BTTT
3.5.2 Connecting Video Output
Video output includes a TBNC(PAL/NTSC, 1.0VP- P， 75Ω）output, a VGA output and a HDMI output. System supports BNC, VGA and HDMI output at the same time.
When you are using pc-type monitor to replace the monitor, please pay attention to the following points:
To defer aging, do not allow the pc monitor to run for a long time. Regular demagnetization will keep device maintain proper status. Keep it away from strong electromagnetic interference devices.
Using TV as video output device is not a reliable substitution method. You also need to reduce the working hour and control the interference from power supply and other devices. The low quality TV may result in device damage.
30
3.6 Connecting Audio Input & Output, Bidirectional Audio
3.6.1 Audio Input
BNC port is adopted for audio input port. Due to high impedance of audio input, please use active sound pick-up. Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose contact and it shall be away from high tension current.
3.6.2 Audio Output
The audio output signal parameter is usually over 200mv 1KΩ (BNC). It can directly connect to low impedance earphone, active sound box or amplifier-drive audio output device. If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking. In this case you can adopt the following measures:
Use better sound pick-up with better directing property. Reduce the volume of the sound box. Using more sound-absorbing materials in decoration can reduce voice echo and
improve acoustics environment.
Adjust the layout to reduce happening of the squeaking.
3.7 Alarm Input and Output Connection
Please read the followings before connecting.
1. Alarm input
a. Please make sure alarm input mode is grounding alarm input. b. Grounding signal is needed for alarm input. c. Alarm input needs the low level voltage signal. d. Alarm input mode can be either NC (normal Open) or NO (Normal Close) e. When you are connecting two DVRs or you are connecting one DVR and one other device, please use a relay to separate them,
2. Alarm output
The alarm output port should not be connected to high power load directly (It shall be less than 1A) to avoid high current which may result in relay damage. Please use the co contactor to realize the connection between the alarm output port and the load.
3. How to connect PTZ decoder
a. Ensure the decoder has the same grounding with DVR, otherwise you may not control the PTZ. Shielded twisted wire is recommended and the shielded layer is used to connect to the grounding. b. Avoid high voltage. Ensure proper wiring and some thunder protection measures.
c. For too long signal wires, 120Ω should be parallel connected between A, B lines on the
far end to reduce reflection and guarantee the signal quality. d. “485 A, B” of DVR cannot parallel connect with “485 port” of other device. e. The voltage between of A,B lines of the decoder should be less than 5v.
Loading...
+ 206 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use