8.0” Rack-mountable
TFT LCD MONITOR
User Manual
Part Number 82-12455
Version: V0.08c
Notice:
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limitations for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer, or an experienced radio/TV technician for help.
Safety Precautions
Please read this User’s Manual carefully.
Please keep and follow all instructions.
Please heed all warnings.
Please use only the power adapter that came with the equipment.
Unauthorized adapters or accessories from other sources may damage
the equipment.
Before turning on the equipment, please make sure that all the peripheral
devices are installed correctly.
Keep the equipment away from liquids while in use.
Clean only with dry cloth.
Keep the equipment away from direct sunlight or heat sources.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Please mount the system in a stable fashion on a desk or in a rack to avoid
injury to personnel or the system.
Safety Information (cont’d)
Never place any object on the power cord nor route the power cord near
foot traffic.
Do not overload electrical power outlets; this can result in fire or electric
shock.
Never repair the equipment by yourself. The user may be exposed to
2
hazard if the cover is removed.
Unplug the power cord in case of the following situations:
The power cord is damaged.
Liquids are splashed on the system.
The system is dropped onto the ground or the chassis is
damaged.
If the system is damaged, please package it carefully for repair.
Always use the polarized, grounding-type plug supplied with the unit.
Using a non-grounded plug can cause damage to the unit, especially in
lightening storms.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Avoid plugging power cord into overloaded AC outlet. Serious equipment
damage, or fire could result from over loading the circuit.
Monitor should only be serviced by a trained technician, or the original
manufacturer
Disconnect the power from the monitor if any of the following situations
occur:
Power cord damaged
Water/liquid splits on monitor
The monitor is dropped, or the cabinet damaged
Warranty Information
A 1-year warranty against workmanship from the data of purchase is valid
only if the monitor housing is unopened. If a problem is encountered
under normal use, please contact Defender Security Customer Service at
1-800-543-4330. Warranty cannot be guaranteed if damage to the monitor
is determined to be the result of misuse.
Safety Warnings
RISK OF ELECTRIC SHOCK
WARNING: To reduce the risk of electric shock, do not remove the front or back covers.
No user-serviceable parts inside. Refer servicing to qualified service personnel only.
WARNING
DO NOT OPEN
The lightning flash with arrow-head
within a triangle is intended to inform
the user that parts inside the product
are a risk of electric shock.
3
The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are explained.
Loading...