Dedrone TH45J6VPCS User Manual
INSTALLATION
Manual
RF-100
IM-Inst-RF10021en ENGLISH
Dedrone
Legal Provisions
The information contained in these documents is the property of Dedrone GmbH. Any
publication, whether in whole or in part, requires prior written approval by Dedrone GmbH.
Internal reproduction used solely for the purpose of product evaluation or other proper use
is allowed and does not require prior approval.
The declaration of conformity is available on request at support@dedrone.com.
Copyright
This manual is the intellectual property of Dedrone GmbH and is protected by copyright. All
rights reserved.
Dedrone GmbH
Miramstraße 87
34123 Kassel
Germany
Fon +49 561 861799-0
Fax +49 561 861799-111
Email info@dedrone.com
©2018 Dedrone GmbH. All rights reserved.
2 IM-Inst-RF10021en
Dedrone
Content
1 Safety.................................................................................................................................. 4
1.1 Symbols ........................................................................................................................................ 4
1.2 Intended Use ............................................................................................................................... 4
1.3 Safety Information .................................................................................................................... 5
2 The RF-100 ......................................................................................................................... 6
3 Unpacking .......................................................................................................................... 7
4 Scope of Delivery .............................................................................................................. 7
5 Installation......................................................................................................................... 8
5.1 Select the Mounting Place ....................................................................................................... 8
5.1.1 Mounting Location.......................................................................................................... 8
5.1.2 Mounting Surface ........................................................................................................... 9
5.1.3 Mounting Orientation .................................................................................................... 9
5.1.4 Mounting Device ............................................................................................................. 9
5.2 Power Supply and Required Tools ........................................................................................ 10
5.3 Cable Requirements and Preparation (Crimp) .................................................................... 11
5.4 Installation with Pole Mount ................................................................................................. 12
6 Integrate RF-100 in your DroneTracker ..................................................................... 14
7 Cleaning ........................................................................................................................... 15
8 Decommissioning ........................................................................................................... 15
8.1 Shut Down the RF-100 ........................................................................................................... 15
8.2 Dismantling ............................................................................................................................... 15
8.3 Disposal ...................................................................................................................................... 15
9 Technical Data ................................................................................................................. 16
IM-Inst-RF10021en 3
1 Safety Dedrone
1 Safety
1.1 Symbols
Symbol Explanation
Indicates a situation which, if not avoided, can result in property damage
Information that is important for a specific goal, but is not safety-relevant
Indicates a requirement for meeting a specific goal
Desired result
A problem that might occur
Action to resolve a problem
1.2 Intended Use
The RF-100 is a passive, network-attached sensor for the detection of radio frequencies (RF). It
supplements the DroneTracker System with another level of detection. The RF-100 detects
targeted radio signals of different drones and remote controllers and sends the data, along
with an alert, to the DroneTracker System.
The RF-100 is intended for civil commercial and private use in conjunction with a DroneTracker
System.
The RF-100 is suitable for indoor and outdoor use.
Use this product only in accordance with the information provided in the enclosed
documentation and with the locally applicable legal standards and directives. Any other
application may cause personal injury or property damage.
Any use of the product other than that described in the intended use section does not qualify
as appropriate. The enclosed documentation is an integral part of this product. Keep the
documentation in a convenient place for future reference and observe all instructions
contained therein.
The type label must remain permanently attached to the product.
FCC and IC
This device complies with Industry Canada licence-exempt RSS standard(s) and complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
4 IM-Inst-RF10021en
Dedrone 1 Safety
Warning! Setup should be carried out by trained personnel only, in accordance
Do not attempt to service this device yourself. Refer all servicing to qualified
Adjust only those controls specified in the operating instructions. Improper
Despite careful construction, electrical devices can cause fires. Do not mount the
Do not install product near any heat sources such as radiators, heaters, exhaust air
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Modifications: Any modifications made to this device that are not approved by Dedrone GmbH
may void the authority granted to the user by the FCC to operate this equipment.
Caution!
To prevent permanent exposure, the device should be installed and operated
with a minimum distance of 20 cm (7.87 in) between the device and your body.
1.3 Safety Information
Read, follow and retain all of the following safety instructions. Heed all warnings on the unit
and in the operating instructions before operation.
with the national electric code, ANSI/NSPA, and all local country codes.
service personnel. This device has no user-serviceable internal parts.
Whenever any damage to the device has occurred, unplug the devices from the
power source by disconnecting the patch cable and refer servicing to qualified
service personnel. Such damages can be:
• the patch cable is damaged
• an object has fallen on the device
• the device has been dropped, or its enclosure has been damaged
• the device does not operate normally when the user follows the operating
instructions correctly
adjustment of other controls may cause damage to the unit.
RF-100 in areas containing highly flammable materials or gases. Do not mount the
RF-100 in a potentially explosive atmosphere.
systems or other equipment (including amplifiers) that produce heat.
IM-Inst-RF10021en 5
2 The RF-100 Dedrone
B
E
D
C
2 The RF-100
The RF-100 is a passive, network-attached sensor for the detection of radio frequencies (RF).
The RF-100 detects targeted radio signals of different drones and remote controllers and
sends the data, along with an alert, to the DroneTracker System.
A
Parts of the RF-100
Power button
A
RF-100
B
Antenna
C
It scans a wide frequency band for radio frequencies and classifies them. The data is recorded
and available on the DroneTracker user interface.
RF Mounting Plate
D
Network socket (covered)
E
6 IM-Inst-RF10021en
Loading...