Decolav 1761 User Manual
KATESTON BATH VANITY
36 1/32"
915
3/4"
19
35 7/16"
899.8
Finished Floor
18 25/32"
477.4
8"
203.2
1 13/32"
36
16 5/32"
410.6
11 7/32"
285
17 1/2"
444.5
6"
152.4
1 31/32"
50
4 19/32"
117
Finished Wall
8"
203.2
1 13/32"
36
16 5/32"
410.6
11 7/32"
285
17 1/2"
444.5
6"
152.4
1 31/32"
50
4 19/32"
117
Finished Wall
18 25/32"
477.4
item #1761-SSA
USE AND CARE GUIDE
THANK YOU FOR CHOOSING DECOLAV
We appreciate the trust and condence you have placed in DECOLAV® through the purchase of our products. We strive to continually create and manufacture quality
products designed to enhance your home. Visit us online at decolav.com for our full line of products, and follow us on Facebook, Twitter and Pinterest for the most
up-to-date information, product care tips and trends.
PRE-INSTALLATION
NOTE: Actual wood color, grain pattern and other appearance
characteristics may vary within each veneer species and grade.
NOTE: It is recommended that a professional contractor be
retained for the installation of this product.
• Unpack your new DECOLAV product and inspect it for damage. Keep the product in its original package until you are ready to install it
• The oor and walls must be square and level
• Shut the water supply o when replacing an existing xture
• Preparation of the oors and walls, including all additional wall supports, may be required
• Observe all local plumbing and building codes
RECOMMENDED TOOLS
tape measure phillips screwdriver drill level pencil
CARE AND CLEANING
• Do clean your DECOLAV product to maintain its new appearance over the years. Wipe with a damp cloth and dry with a soft cloth. If necessary, a general mild soap and
water solution can be used. Use only a mild furniture polish to clean wood frame
• Do not clean the product with detergents, acids, abrasives, harsh cleaners or cloths with a coarse surface (S.O.S.® pads, Scotch Brite® pads, etc.)
• Do not allow your DECOLAV product to unnecessarily encounter other solid objects
PRODUCT DIMENSIONS AND PARTS LIST
item #1761-SSA
Part Quantity
Vanity
Towel tray 1
Vanity dimensions:
36” W x 18.8” D x 35.3” H
© DECO LAV, INC. 2014
1
top view
front view side view
PLEASE CONTACT 18663326528 FOR FURTHER ASSISTANCE
DECOLAV.COM
1
KATESTON BATH VANITY
item #1761-SSA
ASSEMBLY INSTRUCTIONS
NOTE: Use Decolav drain item #9290-CP/SN/PN/DB,
9296-CP/SN/PN/DB or #9298-CP/SN/PN/DB.
Decolav cannot guarntee leakage wih other manufacturer drains.
1
SETTING UP YOUR NEW VANITY
• Carefully remove your new vanity from carton and place
safely aside
• Turn o water supply to faucet
• Remove existing vanity
• Determine the location in the bathroom the vanity will be
installed
• Measure the vanity width and height and mark outline on
wall
• Move the vanity into place and level with the adjustable glides
on bottom of vanity
• Locate and mark wall studs
• Towel tray can be placed anywhere on top of the vanity at
your preference
NOTE: Use Decolav decorative bottle trap item #9102-CP/SN/
PN/DB to complete the look.
© DECO LAV, INC. 2014
Figure 1
PLEASE CONTACT 18663326528 FOR FURTHER ASSISTANCE
DECOLAV.COM
2
Loading...