Decolav 1725 User Manual
BENNETT WALL MOUNTED MIRROR CABINET
5 9/32"
134
35"
889
5 9/32"
134
5 9/32"
134
23 1/32"
585
9 1/2"
241
9 1/2"
241
42"
1067
35 7/16"
900
Finished Wall
Finished Wall
5 9/32"
134
35"
889
5 9/32"
134
Finished Wall
Finished Wall
item #1725-GAW / 1725-RAW / 1725-WEG
USE AND CARE GUIDE
THANK YOU FOR CHOOSING DECOLAV
We appreciate the trust and condence you have placed in DECOLAV® through the purchase of our products. We strive to continually create and manufacture quality
products designed to enhance your home. Visit us online at decolav.com for our full line of products, and follow us on Facebook, Twitter and Pinterest for the most
up-to-date information, product care tips and trends.
PRE-INSTALLATION
NOTE: Actual wood color, grain pattern and other appearance
characteristics may vary within each veneer species and grade.
NOTE: It is recommended that a professional contractor be
retained for the installation of this product.
• Unpack your new DECOLAV product and inspect it for damage. Keep the product in its original package until you are ready to install it
• The oor and walls must be square and level
• Preparation of the oors and walls, including all additional wall supports, may be required
• Observe all local plumbing and building codes
RECOMMENDED TOOLS
tape measure phillips screwdriver drill level pencil
CARE AND CLEANING
• Do clean your DECOLAV product to maintain its new appearance over the years. Wipe with a damp cloth and dry with a soft cloth. If necessary, a general glass cleaner
can be used. Use only a mild furniture polish to clean wood frame and shelves
• Do not clean the product with detergents, acids, abrasives, harsh cleaners or cloths with a coarse surface (S.O.S.® pads, Scotch Brite® pads etc.)
• Do not allow your DECOLAV product to unnecessarily encounter other solid objects
PRODUCT DIMENSIONS AND PARTS LIST
item #1725-GAW / 1725-RAW / 1725-WEG
Part Quantity
Mirror assembly
Wall cleat 1
Glass shelf 6
Wall screw 4
Wall anchor 4
Mirrored cabinet dimensions:
42” W X 5.3” D x 35” H
1
Finished Wall
35"
889
9 1/2"
241
42"
1067
23 1/32"
585
9 1/2"
241
42"
1067
35 7/16"
900
back viewfront view side view
5 9/32"
134
35"
889
5 9/32"
134
© DECO LAV, INC. 2014
PLEASE CONTACT 18663326528 FOR FURTHER ASSISTANCE
DECOLAV.COM
1
Finished Wall
Mirror Assembly
Wall Cleat
BENNETT WALL MOUNTED MIRRORED CABINET
item #1725-GAW / 1725-RAW / 1725-WEG
ASSEMBLY INSTRUCTIONS
NOTE: Two individuals are recommended for installation of this
product.
1
SETTING UP YOUR NEW WALL MOUNTED MIRROR CABINET
• Carefully remove your new mirror from carton and place safely aside
• Determine at what height the wall cleat will be hung. Mark with pencil
• Using a level, make a horizontal line where the mirror is to be hung which is
parallel to the oor
• Place the Wall Cleat on this line in the desired location and mark for the
drywall anchor holes (Note: if a hole will hit a wall stud use a screw instead of
a drywall anchor)
• Drill holes for the drywall anchors and install drywall anchors. See gure 1
2
MOUNT MIRRORED CABINET TO FINISHED WALL
• Raise Wall Mounted Mirrored Cabinet above Wall Cleat and lower Mirror
Cleat into position. See gure 2
• Gently push down on the top of the Wall Mounted Mirror to ensure
the cabinet cleat and wall cleat are fully seated into position. The Wall
Mounted Mirror should be fully against the wall when cleats are fully
seated
• Slight side to side adjustments can be made by lifting up slightly on the
cabinet or sliding the cabinet left and right
Wall Hole
Anchor
Wall Cleat
Wall Screw
Finished Wall
3
INSTALLING AND ADJUSTING THE REMOVABLE
SHELVES
• Remove all glass shelves from its protective packaging
• Rest shelves on one side of the open cabinet and slowly lower glass onto
opposing sides shelf rests. ( Repeat on remaining glass shelves)
Tempered Glass Shelf
Figure 1
Shelf Pin
Finished Wall
© DECO LAV, INC. 2014
Figure 2
PLEASE CONTACT 18663326528 FOR FURTHER ASSISTANCE
DECOLAV.COM
2
Loading...