Debrismaster Mcdl30-h05.5, Mcdg30-br65.5, Mcdg40-br6.0, Mcdg40-br8.0, Mcdg30-br6.0 Owner's Manual
...
DEBRIS
MASTER™
INDUSTRIAL
LITTER VAC
GAS
OPERATION
MANUAL
This litter vac will afford you many
years of trouble-free operating satisfaction, provided it is given proper
care. All parts have passed rigid quality control standards prior to their
being assembled to produce the finished product. Prior to packaging,
your unit was again inspected for
assurance of flawless assembly.
This litter vac is protectively packed to
prevent damage in shipment. We recommend that upon delivery, unpack the
unit and inspect it for any possible
damage. Only a visual examination will
reveal damage that may have
occurred.
SAVE THESE INSTRUCTIONS
Address: 777 South Street, P.O. Box 2310
TEL: (800) 835-7812 ! (845) 565-8850
FAX: (800) 752-6883 ! (845) 565-9392
URL: www.mastercraftusa.com
E-mail: techsupport@mastercraftusa.com
If damage is discovered, immediately
notify the transportation company that
delivered your unit. As a shipper, we
are unable to report any claim for damage. You must originate any claim within 5 days of delivery.
This manual is for you protection and
information. PLEASE READ CAREFULLY since failure to follow precautions
could result in discomfort or injury.
Read this manual completely before
operating this litter vac. It is important
to follow instructions in this manual to
prevent the possibility of injury or damage to the user and/or litter vac.
Newburgh New York 12550-0606
PLEASE READ
CAREFULLY
BEFORE
OPERATING
Page 1
LITTER VAC
SPECIFICATIONS
! Engine:
Briggs & Stratton 6 HP
Involute Housing:
!
! 6 3/4" High X 183/4", all 14
gauge welded steel reinforced at
all stress points. Mounted parallel
to wheel base, provides extra vacuum.
30" Intake:
!
Tapered intake for suction beyond
intake width. 3° taper generated
from center of intake mouth central to involute housing.
Booster Baffle:
!
Directly under involute housing (16
gauge. steel), cylindrical baffle to
pick-up heavier, denser debris (i.e.
nails, washers, broken glass,
bolts).
Steel Impeller:
!
12" diameter X 43/4" high welded
and balanced 1/4" thick.
!
Impeller Shaft Guard:
Prevents string, wire banding
straps from wrapping around and
binding motor shaft.
Triple Deflection Deflector
!
Baffle:
Used on debris exit of machine to
protect operator and collection
bag.
Rear and Front Wheels:
!
10" Dia Semi-Pneumatic Rear
Wheels (2) and 31/2" Dia 360°
Swivel Front Whee, for quick and
easy maneuverability.
Remote Control Throttle:
!
Mounted on handle of machine for
quick and easy regulation of motor
RPM, starting and stopping.
11 Cu. Ft. Filter Bag:
!
Hi-performance collector filter bag
retard clogging with long zipper
that opens bag for fast emptying.
Bag Dolly Assembly:
!
Attached to rear axle of sweeper
with its own swivel support caster
to carry the weight of the bag as it
fills.
Handle:
!
1" dia chrome plated tubular steel.
Page 2
Dolly Assembly
Bag Installation
INSTALLATION
Clamps over axle for easy attachment
and use.
Handle Assembly
See Instructions below.
Remote Control
Install on engine first. See engine
instructions sheet.
Attach control lever to top of handle
with screws provided. Use clips to hold
control against handle.
Work control for ease of operation and
see that speed control on engine
moves to both limits.
Tighten inner control wire clamp, cut
off excess and blend under.
Engine:
READ manual before starting engine.
1) Slip filter bag neck over Defector
Baffle and into the "U" channel of
the housing exhaust and tighten.
2) Clamp should be on the right
side of tip channel.
CAUTION:
Make sure the bag DOES NOT come
into contact with the muffler.
If it does, and the bag is installed
correctly, rotate the engine
counterclockwise.
The bag is designed for use with the
Dolly. When using outside, open side
vent zipper to get rid of excess dust
and maintain a constant flow of air.
When not practical to exhaust dust
close zipper and clean bag often.
KEEP BAG CLEAN
Dry out when wet to avoid rotting.
INSTRUCTIONS
Page 3
Loading...