DCTF CEAUDIO ELECTRONICS SBT2019 User Manual
FCC Information
Compliance Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modications not expressly approved could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Information
This device has been evaluated to meet general RF exposure requirements. The device
can be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is tted with a Li-ion battery. Do not damage, open, or dismantle the battery
and do not use it in damp and/or corrosive conditions. Use only with compatible chargers.
Never dispose of batteries in a re, and never expose them to
high temperatures. Do not expose the product to temperatures
exceeding 60°C (140°F).
Rating Label Denitions
Direct current symbol.
This symbol signies the product must not be discarded as house hold waste, and should be delivered to an appropriate collection
facility for recycling. Proper disposal and recycling helps protect
natural resources, human health and the environment.
This symbol signies and declares that this equipment has battery
charging which complies with California CEC and energy eciency.
This symbol signies that this is a wireless device powered by
Bluetooth® technology. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and used
under license.
Territory: United States/Canada
Warranty Information
LIMITED WARRANTY TO ORIGINAL CONSUMER
This product (including any accessories included in the original packaging) as supplied
and distributed new by an authorized retailer is warranted by Southern Telecom, Inc.
to the original consumer purchaser against defects in materials and workmanship
(“Warranty”) as follows:
To obtain warranty service:
• Visit our website at www.southerntelecom.com
• Click on Product Support
• Select the Brand of your device
• Select Service Request and ll out the form to begin your inquiry
Your product will be repaired or replaced, at our option, for the same or similar model
of equal value if examination by the service center determines this product is defective.
Products received damaged as a result of shipping will require you to le a claim with
the carrier.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modication including software modications such as the
installation of custom rmware. This warranty is voided in the event any unauthorized person opens, alters
or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED
ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY
PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR
REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE
REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT
LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL
APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT
EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT
TRANSFERABLE.
Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential
damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty
gives you specic legal rights, and you may have other rights that vary from state to state or province to
province. Contact your authorized retailer to determine if another warranty applies.
2019 Sharper Image® name and logo are registered trademarks. Manufactured, marketed, and
distributed under license by Southern Telecom, Inc. Brooklyn, NY 11220. © Sharper Image.
All Rights Reserved.
All product names, trademarks, and registered trademarks are property of their respective owners. All
company, product, and service names used in this document are for identication purposes only. Use
of these names, trademarks, and brands does not imply endorsement.
Printed in China
Designed in USA
v2. 03-2019
Wireless Sound Bar
Instruction Manual
SBT2019
Before You Begin... Getting Started
Caution
• READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
• THIS IS NOT A TOY, please keep away from children
• Do NOT submerge in water
• Keep away from extreme heat and/or humidity
• Do not open this product or attempt to repair the unit yourself should
it not be working.
• Low power may cause poor Bluetooth connection or sound distortion
• Only power this device with its suppiled power adapter
Questions & Customer Support
For any issues concerning this product, please visit our website at
SouthernTelecom.com and click on Product Support.
In the Box
• SBT2019 - Wireless Speaker (x1)
• 5V/1.5A Power Adapter (x1)
• RCA-3.5 mm AUX Cable (x1)
• Remote Control (x1)
• Instruction Manual (x1)
[ ] | [ ] Buttons
(Press +Hold) Skip Tracks
(Press) Adjust Volume
[ ] Button
(Press) Change input
mode (BT, AUX, Optical)
[ ] Button
(Press +Hold) Power
(Press) Pause/resume
ON/OFF
playback
Location of Controls
3.5 mm Auxiliary
Audio Input
Optical Audio
Input
DC Power
Input
Wall Mounting the Speaker
1. Remove the speaker and its contents from packaging.
2. Using a pencil, mark two spots on a wall measuring XXXXX inches apart.
3. If installing to a wooden surface, drive or drill a mounting screw into the
wall at each marked location. If installing to drywall or a brick surface, you
may need to install plastic anchors to properly secure the mounting
screws.
4. Place and hang the speaker from its mounting holes on the back onto
the installed mounting screws.
Powering the Speaker
Insert the pin of the supplied 5V/1.5A power adapter into the DC power
input on the side of the speaker. Plug the adapter into an electrical outlet.
Powering ON/OFF
• Press and hold the [ ] button on the speaker to power ON. A tone will
be heard and the speaker will automatically enter Bluetooth pairing mode.
The speaker will automatically re-pair to any nearby, previously-paired
devices that have Bluetooth enabled.
• Press and hold the [ ] button again to power OFF.
Changing Input Modes
• Press the [ ] button to change between Bluetooth mode, 3.5 mm AUX,
and optical audio inputs.
Note: When plugging in a 3.5 mm or optical cable to the speaker, the
speaker will automatically switch to AUX mode.
Bluetooth Pairing
1. Power the speaker ON. A tone will be
heard and the LED indicator will quickly
ash BLUE.
2. Set your mobile device to search for
Bluetooth devices. When it appears,
select SBT2019 from the list of found
devices.
3. After a successful pairing, a tone will
be heard and the LED indicator will turn solid GREEN.
Using the 3.5 mm AUX Input
To use the speaker as a wired device, insert the 3.5 mm connector of the
supplied AUX cable into the 3.5 mm auxiliary audio input jack. Insert the
RCA connectors into the audio outputs of your media-playing device.
Note: Typically, RCA connectors are color-coded with Red being for the
right audio channel and white being for the left audio channel.
The LED indicator will turn GREEN when the AUX input is in use. While
connected, playback is controlled via the connected device. Volume can
be controlled with the speaker, remote control or the connected device.
Speaker is ready
to pair
Using the Optical Input
Insert one connector of an optical audio cable (not included) into the
optical audio input on the side of the speaker. Insert the other connector
into the optical output of your media-playing device.
The LED indicator will turn GREEN when the optical input is in use. While
connected, playback is controlled via the connected device. Volume can
be controlled with the speaker, remote control or the connected device.
Playing Music
To enjoy music on your speaker, make sure that the speaker is properly
paired to your Bluetooth-enabled device or connected via the 3.5 mm
auxiliary or optical audio input jack.
Controlling Playback & Volume (Bluetooth Only)
• Press the [ ] button to pause/resume media playback.
• Press the [ ] and [ ] buttons to skip tracks.
• Press and hold the [ ] and [ ] buttons to adjust volume.
Using the Remote Control
• [ ] Button: Enter/leave standby mode
• [ ] Button: Change input mode
• [ ] Button: Mute/unmute volume
• [ ] Button: Skip to previous track
• [ ] Button: Pause/resume playback
• [ ] Button: Skip to next track
• [ ] Button: Decrease volume
• [ ] Button: Reset to factory settings
• [ ] Button: Increase volume
Loading...