DCS RGV486GLL, RGU305N, RGV485GDN, RGV486GDN, RGV364GLN Specification Sheet

...
0 (0)
DCS RGV486GLL, RGU305N, RGV485GDN, RGV486GDN, RGV364GLN Specification Sheet

dcsappliances.com

P. 888-936-7872

dcsappliances.ca

Gas Ranges Product Dimensions

RGU-48, RGU-36, RGU-30

RGV-48, RGV-36, RGV-30

RGU-48, RGV48

A

RGU-36, RGV-36

A

RGU-30, RGV-30

Standard Installation:

Full Backguard Installation:

using the appropriate range mount

using the appropriate wall mount Full

Standard backguard model: BGRU2-1548,

backguard model: BGRU-3048,

BGRU2-1536, BGRU2-1530

BGRU-3036, or BGRU-3030

 

Hood

 

Hood

 

H

 

H

 

51" Min. to

 

51" Min. to

 

combustibles

 

combustibles

 

I

B

I1

 

C

 

 

 

D

 

D

E

0" Clearance

E

0" Clearance

F

F

G

G

As defined in the "National Fuel Gas Code" (ANSI Z223.1, latest edition).

The horizontal surfaces of the cooktop trim must not be below countertop level.

A

Island Installation:

using the integral island trim only

Hood

 

12" Min. to

 

combustibles

,

without backguard

 

51" Min. to

 

combustibles

D

 

0" Clearance

J

K

Important!

If using the island trim only, a 12" clearance is required between the back of the range and a combustible surface (above the cooking surface). If the clearance is less than 12", the back wall must be non-combustible and made of heat-resistant material.

Product Dimensions (inches)

 

 

RGU-48

RGU-36

RGU-30

 

 

RGV-48

RGV-36

RGV-30

 

 

 

 

 

A

Width of product

47 – 7/8"

35 – 7/8"

29 – 7/8"

 

 

 

 

 

B

Height of full backguard

1

1

1

26 – /2"

26 – /2"

26 – /2"

 

 

 

 

 

C

Height of standard backguard

11 – 13⁄32"

11 – 13⁄32"

11 – 13⁄32"

 

 

 

 

 

D

Height of integral island trim

1

1

1

3 – /2"

3 – /2"

3 – /2"

 

 

 

 

 

E

Height of product (from floor to cooktop trim, excluding grates

min. 35 – 3/4"

min. 35 – 3/4"

min. 35 – 3/4"

 

and island trim)

max. 36 – 3/4"

max. 36 – 3/4"

max. 36 – 3/4"

 

 

 

 

 

F

Maximum depth from wall to front of product (including handle)

1

1

1

30 – /4"

30 – /4"

30 – /4"

 

 

 

 

 

G

Maximum depth from wall to front of product with door open

46 – 11/16"

46 – 11/16"

46 – 11/16"

 

 

 

 

 

H

Maximum depth from wall to front of product (excl. handle and knobs)

29"

29"

29"

 

 

 

 

 

I

Depth of standard backguard

13⁄16"

13⁄16"

13⁄16"

 

 

 

 

 

I1

Depth of full backguard

1 – 5⁄16"

1 – 5⁄16"

1 – 5⁄16"

 

 

 

 

 

J

Depth from wall to front of range side panel

25"

25"

25"

 

 

 

 

 

K

Depth of product from wall to oven door front (excl. handle)

1

1

1

27 – /2"

27 – /2"

27 – /2"

 

 

 

 

 

Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.dcsappliances.com

Loading...
+ 1 hidden pages