DC PROGRAMMABLE ELECTRONIC LOAD DL24MP-150W User Manual

DL24MP-150W-Purple User Manual

2.4-inch HD color screen Bluetooth digital transmission curve version

battery capacity / DC power multi-function tester

(This product will be updated at any time, please pay attention to the web page description for detailed update details)

Product parameters:

Test voltage:2~200V

Working current:3MA~23A±2A

DL24 Discharge power: voltage * current < 150 W

(The actual running current is limited by the maximum power, please adjust the current according to the law of

energy conservation)

The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is

popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then

discharge, you can first slowly and smoothly adjust the preset value in the start and discharge, in order to adjust

up to the maximum power for discharging

2.Product application:

1.1 Battery c apacity test

The tester is designed for the discharge of various batteries,18650 battery,car battery including NiMH, NiCd, LiPo,

LiFe and P b, as well as capacity testing.

1.2 Mobile power test

This tester supports discharging of mobile power supply and capacity test.

1.3 Power performance test

The tester supports performance and aging tests of various DC power supplies.

(2):

2.1 Power supply: DC 12V/1A

2.2 Voltage range: 0-200.00V, step 0.01V

2.3 Current range: 0.010-20.00A, step 0.01A (the current is automatically adjusted according to the power limit)

2.4 Discharge method:

CC: Constant current discharge of the battery, which supports testing of battery capacity or power supply current.

CP: Discharge the battery with constant power for use or test power such as constant power equipment.

2.5 Discharge power:150W

2.6 Four wires: voltage and current channels are separated, with high test accuracy

2.7 IPS display: voltage, curr ent, time, capacity, power, electric energy, etc.

2.8 PC connection: The tester can be connected to the computer through Bluetooth to achieve more functions,

such as graphics, calibration, firmware upgrades, and test cycles.

3.Function interface introduction:

This product adopts the high-end and cost-intensive "2.4-inch high-definition large color Chinese

and English display screen", designed a variety of functional interface content,

Various parameters are displayed on one screen, and different function interfaces can be switched

by short pressing the button. The interface diagram and introduction are as follows

--Key Button operate Description--

1)Short press the“ON/OFF” button to start and stop, short press the upper left

corner of the "M" button to move the cursor and then adjust the corresponding

value with the "+/- " button

2) Long press the "+/- " button at the same time to clear all accumulated data

such as the current capacity, battery time, etc. (Long press the "ON/OFF" button

to enter the background ，also can be cleared in the background menu)

3) Long press the “M” button and the function mode starts to flash, then short

press the “+/-” button to select the function (CC/CV/CR/CP/BRT/PT)

4) In OFF mode, long press the "ON/OFF" button to enter the background interface, then short press the "M" button to switch the

setting column, and the "+/-" button to adjust the number

5) Short press the "+/-" button in the constant current accuracy column of the background setting interface to switch the constant

current accuracy (10mA Or 1mA)

6) When the system is not supplying power, press and hold the "M" button and do not let go. Then power on again. Enter the splicing

power option and jump to the actual power value before let go

7) Long press the "M" button the function mode starts to flash, short press the "M" button again to enter the setting adjustment value

of the time-limited discharge and C ut off voltage column value

--Panel Main buttons and description--

Ⅰ:Bluetooth indicator(Flashing waiting for Bluetooth

connection,Long light indicates successful connection)

Ⅱ:"+" Valve Increase Button(Short press the button to increase the

number, long press the button to increase continuously,When the

mode is flashing, short press the button to cycle backwards)
Ⅲ:"M" Set Button(Long press "M" key to start function mode, press

"+" or "-" key to switch CC/CV/CP/CR/BRT/PT mode, long press "M"

key to start function mode, short press "M" again Key to switch

between Time Discharge and Cut off voltage. Press the "+" or "-" key

to set the value, the default is OFF)

Ⅳ:"-" Value Reduce Button(Short press the button to decrease the number and long press the button to decrease

continuously. When the mode is flashing, short press to cycle forward)
Ⅴ:"ON/OFF" Run ON/OFF Button(Short press the button, it is ON or OFF

Long press the button to enter the product background settings, and use the "M" button and "+" or "-" button to set

the parameters)

--Host Parameters and description--

1.Test various DC power inputs

2.MiNi USB detection port inputs

3.Micro USB detection port inputs

4.Type-c USB detection port inputs

5.DIY assembly Different power reserve jumper positions

(150W/300W/450W/600W)

6.External NTC temperature probe

7.DC5.5 system power supply (must supply DC12V 1A)

8.8p cable connected to the panel

9.Increase the power and expand the interface