dCOR design DCRN1169 Assembly Instructions

TELEVISION CONSOLE

Please count and verify all parts before assembly

PAGE 2 OF 9

A

Cambolt (17pcs）

Camlock（16pcs）

D

Cabinet Slide Rails
CL (1pc) CR (1pc)

F

Slide Screw (12pcs)

B

Drawer

Cambolt&Camlock（2pcs）

E

Drawer Slide Rails
DL (1pc) DR (1pc)

G

Knob & Knob Screw

(4pcs)

C

Thin dowel（2pcs）
Thick dowel (20pcs)

H

Drawer Screw (4pcs)

I

Long Screw (4pcs)

L

Magnet (2pcs) Metal Pin (4pcs) Nail (15pcs)

O

J

Spring Insert (4pcs)

M

P

K

Bracket (2pcs)

N

Q

Cap (10pcs)

Pole (10pcs)

Glue（1pc）

Please count and verify all parts before assembly

Part List

PAGE 3 OF 9

Bottom Panel (1pc)

(5)

Side Panel (2pcs)

(9)

(1)

(3)

3RD Panel (1pc)

(6)

(2)

2ND Panel (1pc)

(4)

Top Panel (1pc)

(7)

Faux Bamboo door (2pcs)Middle Panel (2pcs)

Left (6) / Right (7)

(10) (11) (12)

(8)

Back Panel (1pc)

(13)

Drawer

Front Panel

(1pc)

Middle Door (1pc)

(14)

Drawer

Back Panel

(1pc)

(15)

Drawer

Bottom Panel

(1pc)

Cabinet Side Panel (2pcs)

Left (11) / Right (12)

(16)

(17)

Drawer

Side Panel(2pcs)

Left (16) / Right (17)

Insert camlock，
camlock must face
bolt hole

Gently screw cam dowel
into the threaded anchor

Lightly glue one end of
wood dowel and tap into
hole.

Lightly glue dowel and
connect to second panel
by inserting dowels into
holes

Gently screw the cam
clockwise into locked
position.
Do not overtighten.

step1

1.Attach cambolts (A) and
thick dowels (C) to bottom
panel (1).

PAGE 4 OF 9

2.Insert camlocks (A) to
Side Panel (5).

*REFER TO PAGE3 FOR CAMLOCK ASSEMBLY.

step2

Attach side panels (5) to bottom
panel (1).
Gently tighten camlocks.

5

A

5

5

C

A

1

5

1

step3

1.Attach cambolts (A) and thick dowels
(C) to 2ND panel (2).

2.Attach camlocks (A) to middle panels
(6)&(7).

C

A

A

7

6

2

Back view

step4

Attach middle panels
(6)&(7) to bottom panel (1).
Gently tighten camlocks.

5

6

7

PAGE 5 OF 9

5

FRONT

1

step5

Middle door (10) assembly.

1.Push metal pins (M) into middle
door (10).

2.Attach knob (G) to middle door
using knob screw.

step6

Attach middle door (10) to the middle
panels by inserting the metal pins (M)
into slots on each panel .

G

M

6

M

10

G

7

FRONT

10

step7

1.Attach 2ND panel (2) to unit.
Gently tighten camlocks.

2.Lift middle door and gently
push toward rear while placing
metal pins into side wall holes.

3.Attach magnets (L) to middle
panels (6)&(7) as shown.

PAGE 6 OF 9

*These pins will
hold door upright
when in open.

N

2

L

L

step8

Push caps (O) through the holes
of 2ND panel (2) and gently
screw poles (P) into caps as
shown.

step9

1.Place 3RD panel (3) onto unit.

2.Screw poles (P) into unit,using care
not to overtighten .

P

O

P

2

O

FRONT

3

2

step10

Attach cabinet slide rails (D) to
cabinet side panel (11)&(12) using
slide screws (F).

* Make sure:

1.Slide rail CL screws into left side panel (11).
Slide rail CR screws into right side panel (12).

2.The rails’ front edge should
level with side panels’ front side.

step11

1.Insert thick dowels (C) to top
panel (4).

D

CL

F

11

PAGE 7 OF 9

CR

D

12

I

11

2.Attach cabinet side panels
(11)&(12) to top panel (4) using
long screws (I).

step12

1.Place top panel (4) onto unit.

2.Screw caps (O) into unit.

O

12

C

11

Back view

4

4

C

FRONT

12

step13

PAGE 8 OF 9

1.Insert drawer camlocks (B) and
connect drawer slide rails (E) to
drawer side panels (16)&(17) using
slide screws (F).

* Slide rail DL screws into
left side panel (16).
Slide rail DR screws into
right side panel (17).

2.Fasten drawer side panels (16)
&(17) to drawer back panel (14)
using drawer screws (H).

step14

1.Slide drawer bottom panel (15)
into slots in drawer unit.

2.Attach knob (G) to drawer front
panel (13) using knob screw (G).

3.Attach drawer cambolts (B) and thin
dowels (C) to drawer front panel (13).

H

16

17

14

B

F

E

F

DL

G

15

E

DR

4.Attach panel (13) to unit and gently
tighten camlocks.

step15

1.Slide the drawer into unit.

2.Attach the cambolt (A) to the hole
under the top panel (4).

*The Cambolt will prevent the drawer from sliding
out.

B

A

C

G

13

4

PAGE 9 OF 9

step16

Faux bamboo doors (8) assembly.

1.Connect knob (G) to door (8)
using knob screw (G) & bracket (K)
as shown.

2.Push spring pins (J) into top and
bottom holes.

step17

Attach door (8) to unit by
placing one end of spring pin
into hole, gently compress other
end of spring pin so that it will
slide into remaining hole.

J

8

G

K

J

G

step18

1.Turn sample around and connect back
panel (9) to unit using nails (N).

2.Enjoy you new television console!

8

N

9