DCN S5750E-28C-SI, S5750E-28X-SI, S5750E Series, S5750E-52X-SI, S5750E-28X-P-SI User Manual
...
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Content
1
Content
CHAPTER 1 INTRODUCTION ................................................... 1-1
1.1 O
VERVIEW
.......................................................................................... 1-1
1.2 I
NTRODUCTION TO PRODUCT
................................................................ 1-1
1.2.1 Product Overview .................................................................................... 1-1
1.2.2 Features and Benefits ............................................................................. 1-2
1.3 P
HYSICAL SPECIFICATIONS
.................................................................. 1-3
1.4 D
ESCRIPTION OF HARDWARE
............................................................... 1-5
1.4.1 Front Panel ............................................................................................... 1-5
1.4.2 Back Panel ............................................................................................... 1-7
1.4.3 Status LEDs ............................................................................................. 1-7
1.4.4 Interface Description of Front Panel ..................................................... 1-9
CHAPTER 2 HARDWARE INSTALLATION ............................... 2-1
2.1 I
NSTALLATION NOTICE
......................................................................... 2-1
2.1.1 Environmental Requirements ................................................................ 2-1
2.1.2 Installation Notice ................................................................................... 2-4
2.1.3 Classs A Statement ................................................................................. 2-4
2.1.4 Security Warnings ................................................................................... 2-4
2.2 I
NSTALLATION PREPARATION
............................................................... 2-5
2.2.1 Verify the Package Contents .................................................................. 2-5
2.2.2 Required Tools and Utilities ................................................................... 2-5
2.3 I
NSTALLATION GUIDE
........................................................................... 2-6
2.3.1 Installing Switch ...................................................................................... 2-6
2.3.2 Connecting Console ............................................................................... 2-6
2.3.3 SFP Transceiver Installation .................................................................. 2-7
2.3.4 SFP+ extended module Installation ...................................................... 2-7
2.3.5 Copper Cable/Fiber Cable Connection ................................................. 2-8
2.3.6 AC Power Supply Connection ............................................................... 2-9
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Chapter 1 Introduction
1-1
Chapter 1 Introduction
1.1 Overview
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series of ethernet switches are that a
series of three layer line speed Ethernet switch products by self-development in
DCG ,intelligent network management switch used by the network environment w
hich needs the high performance, the bigger port density and the convenient inst
allation,S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches include the types in
the following:
Name Type Description
S5750E series
S5750E-28C-SI
24 copper ports+2 Combo ports ＋ 2
10Gb optical ports
S5750E-28X-P-SI
20 copper ports＋4 Combo ports＋4
10Gb optical ports
S5750E-28X-SI
24 copper ports＋4 10Gb optical ports
S5750E-52X-SI
48 copper ports＋4 10Gb optical ports
S5750E-28F-SI-R
8 Combo ports ＋ 16 1Gb optical
ports+4 10Gb optical ports
S5750E-16F-SI-R
4 Combo ports＋8 1Gb optical ports+4
10Gb optical ports
Table 1-1 S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches types
1.2 Introduction to Product
1.2.1 Product Overview
S5750 series switches include S5750E-28C-SI/S5750E-28X-P-SI/S5750E-28X-SI/
S5750E-52X-SI.S5750E-28X-P-SI supplies 370W POE power supply,and the max
output power of each port is 30W(12 ports per port support POE maximum power
30W,24 ports simultaneously access single port average per port support power of
15.4W).S5750E-28X-P-SI supplies 20 copper ports+4 Combo ports+4 10Gb optical
ports. S5750E-28C-SI supplies 24 copper ports+2 Combo ports+2 10Gb optical ports
S5750E-52X-SI supplies 48 copper ports+4 10Gb optical ports, S5750E-28X-SI
supplies 24 copper ports＋4 10Gb optical ports. S5750E-28F-SI-R supplies 8 Combo
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Chapter 1 Introduction
1-2
ports+16 1Gb optical ports +4 10Gb optical ports. S5750E-16F-SI-R supplies 4 Combo
ports+8 1Gb optical ports +4 10Gb optical ports.
1.2.2 Features and Benefits
Various Interfaces
S5750E-28X-P-SI provides 20 fixed 1000Mb copper ports, 4 1000Mb COMBO
ports (1000Mb fiber SFP ports/1000Mb copper ports) and 4 10Gb optical ports.
S5750E-52X-SI provides 48 copper ports and 4 10Gb optical ports.S5750E-28C-SI
provides 24 copper ports+2 Combo ports ＋ 2 10Gb optical ports.S5750E-52X-SI
provides 48 copper ports＋4 10Gb optical ports. S5750E-28F-SI-R supplies 8 Combo
ports+16 1Gb optical ports +4 10Gb optical ports. S5750E-16F-SI-R supplies 4 Combo
ports+8 1Gb optical ports +4 10Gb optical ports.
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed,
half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet
can be deployed in star or ring topologies. S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0)
series switches provide broad bandwidth and powerful processing capacity. It is suitable
for metropolitan networks and wide area networks. It can simplify network structures
and reduce cost of network construction.
Networking Protocols
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches support 802.1d/w/s, 80
2.1Q, 02.1p, 802.3ad, 802.3x, GVRP, DHCP and SNTP etc. The switches also s
upport the multicast protocols such as IGMP, DVMRP and PIM. Moreover,S5750E
-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches support RIPv1/2, OSPF, BGP and
IPv6 protocols. All these protocols supported enable S5750E-16(28)(52)F(C)(X)(-P)
-SI(R2.0) series switches to meet the requirements of complex network constructi
ons.
ACL
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches support comprehensivel
y ACL policies.The traffic can be classified by source/destination IP addresses, s
ource/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ra
nges and ToS. And various policies can be conducted to forward the traffic. By i
mplementing ACL policies, users can filter the virus packets such as “Worm.Blast
er”, “Worm.Sasser” and “Red Code” etc. S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) s
eries switch also support IEEE802.1x port based access authentication, which ca
n be deployed with RADIUS, to ensure the port level security and block illegal u
sers.
QoS
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Chapter 1 Introduction
1-3
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series switches fully support DiffServ
Module. Each port provides 8 priority queues.Users can specify a queue bandwidth on
each port. WRR/SP/SWRR scheduling is also supported.
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support the port trust. Users can
configure trusted COS, DSCP, IP precedence and port priority. User can also modify
packet’s DSCP and COS values. The traffic can be classified by port, VLAN, DSCP, IP
precedence and ACL table. User can also modify packet’s DSCP and IP precedence
values. Users can specify different bandwidths for voice/data/video to customize
different qualities of service.
3D-SMP Ready
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series are up to the mustard of
Self-defending security region management strategy 3D-SMP according to Digital
China Netware. It is supported interaction with some security system such as firewall,
IDS, etc. It can defense the virus and aggress effectively from the extranet and internet.
Thus enhance the security and stability of the network-wide.
Perfect Web Management.
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support SNMP, In-band and O
ut-of band Management, CLI and WEB interface and RMON. It can mail the corr
elative sensitive information to the administrator abide by SMTP protocol. S5750E
-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support SSH protocol, ensure the configurat
ion management security of the switch. It adopts the Digital China centralized we
b management system DCLM’ for unified management expedienty and compactly.
Flexible Power Ensure System
S5750E-28/52X series of switches support two AC power which have the b
ackup function if one of them is fault. The power is hot swappable that improves
the expansibility and flexibility of the power system.
Abundant Management Ability of Device
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series have the network 1000Mb man
agement port. It can upgrade the device through the common business electrical
port or the network management port. It can also login the network managemen
t web page through the common business electrical port or the network manage
ment port.
1.3 Physical Specifications
Item S5750E-28X-SI S5750E-28X-P-SI
Dimension (W * H *
D)（mm）
440×320×44 440×320×44
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Chapter 1 Introduction
1-4
Weight <6kg <6kg
Fixed ports 24 100/1000Base-TX auto negotiation ethernet
ports
4 10Gb optical ports
20 100/1000Base-TX auto negotiation ethernet
ports
4 1000Mb Combo ports
4 10Gb optical ports
Management ports 1 Console port, 1 network management port which supports 1000Mb rate
System power S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
Output power
supply of PoE
Do not support Support
The max Power
Consumption
36W 406W(370W POE is the maximum power
supply)
Fan Support automatic timing Support automatic timing
Operating
Temperature
0℃~50℃ 0℃~50℃
Relative Humidity
5％~95％ 5％~95％
Table 1-2 Physical Specifications
Item S5750E-52X-SI S5750E-28C-SI
Dimension (W * H *
D)（mm）
440×320×44 440×240×44
Weight <6kg <6kg
Fixed ports 48 100/1000Base-TX auto negotiation ethernet
ports
4 10Gb optical ports
24 100/1000Base-TX auto negotiation ethernet
ports
2 1000Mb Combo ports
2 10Gb optical ports
Management ports 1 Console port, 1 network management port which supports 1000Mb rate
System power S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
Output power
supply of PoE
Do not support Do not support
The max Power
Consumption
36W 36W
Fan Support automatic timing Support automatic timing
S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) Chapter 1 Introduction
1-5
Operating
Temperature
0℃~50℃ 0℃~50℃
Relative Humidity
5％~95％ 5％~95％
Table 1-3 Physical Specifications
Item S5750E-28F-SI-R S5750E-16F-SI-R
Dimension (W * H *
D)（mm）
440×240×44 330×230×44
Weight
3.85kg 2.5 kg
Fixed ports 8 1000Mb Combo ports
16 1Gb optical ports
4 10Gb optical ports
4 1000Mb Combo ports
8 1Gb optical ports
4 10Gb optical ports
Management ports 1 Console port, 1 network management port which supports 1000Mb rate
System power S5750E-16(28)(52)F(C)(X)(-P)-SI(R2.0) series support AC power input:
AC input:
The rating voltage range: 100V~240V AC; 50/60HZ
The max voltage range: 90V~264V AC; 47HZ～63HZ
DC input:
voltage range: 11-13V
current value: 4.5A
Output power
supply of PoE
Do not support Do not support
The max Power
Consumption
<40W <30W
Fan Support automatic timing Support automatic timing
Operating
Temperature
0℃~50℃ 0℃~50℃
Relative Humidity
5％~95％ 5％~95％
Table 1-4 Physical Specifications
1.4 Description of Hardware
1.4.1 Front Panel
S5750E-28X-SI ethernet switches provide 24 100/1000Base-TX auto negotiation
ehternet ports, 4 10Gb optical ports, 4 function LEDs, 1 network management port, 1
Loading...