DCRS-5960 Series Installation Guide Chapter 1 Introduction
1-2
interface with DCRS-5960-52T(R2), the difference is DCRS-5960-52T-DC(R2)
implements 48V DC input, DCRS-5960-52T-PoE(R2) supplies 48 ports for exporting PoE
power supply, and the max output power of each port is 15W. DCRS-5960-28T-DC(R2)
and DCRS-5960-28T-PoE(R2) supply the consistent signal interface with
DCRS-5960-28T(R2), the difference is DCRS-5960-28T-DC(R2) implements 48V DC
input, DCRS-5960-28T-PoE(R2) supplies 24 ports for exporting PoE power supply, and
the max output power of each port is 15W. Front panel of DCRS-5960-28F-DC supplies
12 1000M-fiber-ports and 12 Combo ports. Front panel of DCRS-5960-52F-DC supplies
44 1000M-fiber-ports and 4 Combo ports. DCRS-5960-28-DC and DCRS-5960-52F-DC,
can input 48V DC power.
1.2.2 Features and Benefits
Various Interfaces
DCRS-5960-52T(R2) / DCRS-5960-52T-DC(R2) / DCRS-5960-52T-PoE(R2)
provides 44 fixed 1000Mb copper ports, 4 1000Mb COMBO ports (1000Mb fiber SFP
ports/1000Mb copper ports) and 2 10Gb slots with 2 ports.
DCRS-5960-28T(R2) / DCRS-5960-28T-DC(R2) / DCRS-5960-28T-PoE(R2)
provides 20 fixed 1000Mb copper ports, 4 1000Mb COMBO ports (1000Mb fiber SFP
ports/1000Mb copper ports) and 2 10Gb slots with 2 ports.
DCRS-5960-28F-DC provides 12 1000Mb fiber ports, 12 1000Mb Combo ports
(1000Mb fiber SFP ports/1000Mb copper ports) and 2 slots with the extended cards.
DCRS-5960-52F-DC provides 44 fixed 1000Mb fiber ports, 4 1000Mb Combo ports
(1000Mb fiber SFP ports/1000Mb copper ports) and 2 slots with the extended cards.
Secure Power Supply
DCRS-5960 series switches provide DC/AC power backup, support 220V AC input,
48V DC input or 220V AC, 48V DC input simultaneously.
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed, half-duplex
CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet can be
deployed in star or ring topologies. DCRS-5960 series switches provide broad bandwidth
and powerful processing capacity. It is suitable for metropolitan networks and wide area
networks. Using DCRS-5960 series switches, users can simplify network structures and
reduce cost of network construction.
Networking Protocols
DCRS-5960 series switches support 802.1d/w/s, 802.1Q, 802.1p, 802.3ad, 802.3x,
GVRP, DHCP and SNTP etc. The switches also support the multicast protocols such as
IGMP, DVMRP and PIM. Moreover, DCRS-5960 series switches support RIPv1/2, OSPF,
BGP and IPv6 protocols. All these protocols supported enable DCRS-5960 series