DCI LLC 10/100Base-TX to 100Base-FX PoE PSE FE Media Converter, PoE PSE TP-Fiber User Manual

10/100Base-TX to 100Base-FX PoE PSE FE Media

Converter

User's Manual

Release 1.0

i

The information in this document is subject to change without notice. Unless the explicit written permission of Manufactory
Corporation, this document in whole or in part shall not be replicated or modified or amended or transmitted, in any from, or by any
means manual, electric, electronic, electromagnetic, mechanical, optical or otherwise for any purpose.

DURATION OF HARDWARE WARRANTY

HARDWARE: In accordance with the provisions described under, Manufactory Corporation (hereinafter called “Manufactory”) warrants its
hardware products (hereinafter referred to as “Product”) specified herein to be for a period of twelve (12) months from the date of shipment.

Should a Product fail to perform during the effective warranty period as described above, Manufactory shall replace the defective Product or part,
or delivering a functionally equivalent Product or part in receipt of customer’s request, provided that the customer complies with the return
material authorization (RMA) procedures and returns all defective Product prior to installation of the replacements to Manufactory.

All defective Products must be returned to Manufactory with issuance of a Return Material Authorization number (RMA number) assigned to the
reseller from whom the end customer originally purchased the Product. The reseller is responsible for ensuring the shipments are insured, with
the transportation charges prepaid and the RMA number clearly marked on the outside of the package. Manufactory will not accept collect
shipments or those returned without an RMA number.

Manufactory shall not be responsible for any software, firmware, information or memory data contained in, stored on or integrated with any
Product returned to Manufactory pursuant to any warranty.

EXCLUSIONS. The warranty as mentioned above does not apply to the following conditions, in Manufactory’s judgment, it contains (1) customer
does not comply with the manual instructions offered by Manufactory in installation, operation, repair or maintenance, (2) Product fails due to
damage from unusual external or electrical stress, shipment, storage, accident, abuse or misuse, (3) Product is used in an extra hazardous
environment or activities, (4) any serial number on the Product has been removed or defaced, (5) this warranty will be of no effect if the repair is
via anyone other than Manufactory or the approved agents, or (6) In the event of any failures or delays by either party hereto in the performance
of all or any part of this agreement due to acts of God, war, riot, insurrection, national emergency, strike, embargo, storm, earthquake, or other
natural forces, or by the acts of anyone not a party to this agreement, or by the inability to secure materials or transportation, then the party so
affected shall be executed from any further performance for a period of time after the occurrence as may reasonably be necessary to remedy the
effects of that occurrence, but in no event more than sixty (60) days. If any of the stated events should occur, Party A shall promptly notify Party
B in writing as soon as commercially practicable, but in no event more than twenty (20) business days and provide documentation evidencing
such occurrence. In no event shall the maximum liability of Manufactory under this warranty exceed the purchase price of the Product covered
by this warranty.

DISCLAIMER. EXCEPT AS SPECIFICALLY PROVIDED ABOVE AS REQUIRED “AS IS” AND THE WARRANTIES AND REMEDIES STATED ABOVE
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. ANY AND ALL OTHER WARRANTIES, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR THIRD PARTY RIGHTS
ARE EXPRESSLY EXCLUDED.

MANUFACTORY SOFTWARE LICENSE AGREEMENT

NOTICE: Please carefully read this Software License Agreement (hereinafter referred to as this “Agreement”) before copying or using the
accompanying software or installing the hardware unit with pre-enabled software or firmware (each of which is referred to as “Software” in this
Agreement). BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE PROVISIONS AND CONDITIONS OF THIS AGREEMENT. THE
PROVISIONS EXPRESSED IN THIS AGREEMENT ARE THE ONLY PROVISION UNDER WHICH MANUFACTORY WILL PERMIT YOU TO USE THE
SOFTWARE. If you do not accept these provisions and conditions, please immediately return the unused software, manual and the related
product. Written approval is NOT a prerequisite to the validity or enforceability of this Agreement and no solicitation of any such written
approval by or on behalf of Manufactory shall be deemed as an inference to the contrary.

LICENSE GRANT. The end user (hereinafter referred to as “Licensee”) of the Software is granted a personal, non-sublicensable, nonexclusive,
nontransferable license by Manufactory Corporation (“Manufactory”): (1) To use the Manufactory’s software (“Software”) in object code form
solely on a single central processing unit owned or leased by Licensee or otherwise embedded in the equipment offered by Manufactory. (2) To
copy the Software only for backup purposes in support of authorized use of the Software. (3) To use and copy the documentation related to the
Software solely in support of authorized use of the Software by Licensee. The License applies to the Software only except other Manufactory’s
software or hardware products. Without the prior written consent of Manufactory, Licensee has no right to receive any source code or design
documentation with respect to the Software.

RESTRICTIONS ON USE; RESERVATION OF RIGHTS. The Software and related documentation are protected under copyright laws. Manufactory
and/or its licensors retain all title and ownership in both the Software and its related documentation, including any revisions made by
Manufactory. The copyright notice must be reproduced and included with any copy of any portion of the Software or related documentation.
Except as expressly authorized above, Licensee shall not copy or transfer the Software or related documentation, in whole or in part. Licensee
also shall not modify, translate, decompile, disassemble, use for any competitive analysis, reverse compile or reverse assemble all or any
portion of the Software, related documentation or any copy. The Software and related documentation embody Manufactory’s confidential and
proprietary intellectual property. Licensee is not allowed to disclose the Software, or any information about the operation, design, performance
or implementation of the Software and related documentation that is confidential to Manufactory to any third party. Software and related
documentation may be delivered to you subject to export authorization required by governments of Taiwan and other countries. You agree that
you will not export or re-export any Software or related documentation without the proper export licenses required by the
governments of affected countries.

LIMITED SOFTWARE WARRANTY. Manufactory warrants that any media on which the Software is recorded will be free from defects in materials
under normal use for a period of twelve (12) months from date of shipment. If a defect in any such media should occur during the effective
warranty period, the media may be returned to Manufactory, then Manufactory will replace the media. Manufactory shall not be responsible for
the replacement of media if the failure of the media results from accident, abuse or misapplication of the media.

EXCLUSIONS. The warranty as mentioned above does not apply to the Software, which (1) customer does not comply with the manual
instructions offered by Manufactory in installation, operation, or maintenance, (2) Product fails due to damage from unusual external or electrical
stress, shipment, storage, accident, abuse or misuse, (3) Product is used in an extra hazardous environment or activities, (4) any serial number
on the Product has been removed or defaced, or (5) this warranty will be of no effect if the repair is via anyone other than Manufactory or the
authorized agents. The maximum liability of Manufactory under this warranty is confined to the purchase price of the Product covered by this
warranty.

ii

DISCLAIMER. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED “AS IS ” AND MANUFACTORY AND ITS LICENSORS

MAKE NO WARRANTIES, EXPRESS OR IMPLIED, WITH REPSECT TO THE SOFTWARE AND DOCUMENTAITON. MANUFACTORY AND
ITS LICENSORS DISCLAIM ALL OTHER WARRANTIES, INCLUSIVE OF WITHOUT LIMITATION, IMPLIED WARRANTIES OR MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. FURTHER, MANUFACTORY DOES NOT WARRANT, GUARANTEE, OR MAKE
ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS OF THE USE, OF THE SOFTWARE OR RELATED WRITTEN
DOCUMENTAITON IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE.

CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL MANUFACTORY OR ITS AUTHORIZED RESELLER BE LIABLE TO LICENSEE OR ANY THIRD
PARTY FOR (A) ANY MATTER BEYOND ITS REASONABLE CONTROL OR (B) ANY CONSEQUENTIAL, SPECIAL, INDIRECT OR INCIDENTAL
DAMAGES ARISING OUT OF THIS LICENSE OR USE OF THE SOFTWARE PROVIDED BY MANUFACTORY, EVEN IF MANUFACTORY HAS BEEN
NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE. IN NO EVENT SHALL THE LIABILITY OF MANUFACTORY IN CONNECTION
WITH THE SOFTWARE OR THIS AGREEMENT EXCEED THE PRICE PAID TO MANUFACTORY FOR THE LICENSE.

TERM AND TERMINATION. The License is effective until terminated; however, all of the restrictions in regard to Manufactory’s copyright in the
Software and related documentation will cease being effective at the date of expiration; Notwithstanding the termination or expiration of the term
of this agreement, it is acknowledged and agreed that those obligations relating to use and disclosure of Manufactory’s confidential information
shall survive. Licensee may terminate this License at any time by destroying the software together with all copies thereof. This License will be
immediately terminated if Licensee fails to comply with any term and condition of the Agreement. Upon any termination of th is License for any
reason, Licensee shall discontinue to use the Software and shall destroy or return all copies of the Software and the related documentation.

GENERAL. This License shall be governed by and construed pursuant to the laws of Taiwan. If any portion hereof is held to be invalid or
unenforceable, the remaining provisions of this License shall remain in full force and effect. Neither the License nor this Agreement is
assignable or transferable by Licensee without Manufactory’s prior written consent; any attempt to do so shall be void. This License constitutes
the entire License between the parties with respect to the use of the Software.

LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS
AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN
MANUFACT ORY AND LICENSEE.

iii

Table of Contents

1. Overview............................................................................................................. 1

2. Model Description........................................................................................1

3. Checklist............................................................................................................. 2

4. Installing the Converter............................................................................2

5. WDM Single Fiber Model........................................................................ 5

6. Link Fault Pass Through........................................................................ 6

7. LED Description............................................................................................ 7

8. Connecting to TP, Fiber Device............................................................ 8

9. Cable Connection Parameter............................................................. 9

10. PoE PSE TP-Fiber.................................................................................... 9

iv