DB Technologies VIO-X10 Data Sheet

Datasheet

VIO X10

2 Way Active Loudspeakerr

1x 1”/1x 10”, 900W RMS

VIO X cabinets serve impressively as
a stand alone PA system that can be
stacked, flown or wall-mounted, as a full
range PA or in combination with VIO
S118 and VIO 118R subwoofers, but also
act as the perfect side-fill, delay or stage
monitoring system in larger VIO sound
reinforcement applications.
All VIO X cabinets are powered by on
board Digipro G3 900 W RMS providing
majestic sound pressure levels in
compact size and very limited weight.
Advanced sound processing featuring
Linear Phase FIR Filters allows VIO
Xs to deliver an extremely coherent
audio performance, standing out for
its intelligibility and clarity from every
listening position.
On board presets let users adapt High
Pass Filters to the chosen application, as
well as dedicated EQ presets for Wedge
or Fullrange mode. Last but not least,
VIO X is equipped with RDNet port
allowing monitoring and full remote
control in real time via Aurora Net
software (Windows and Mac).

Features

• Neodymium components

• 900W RMS

• Advanced DSP featuring Linear
Phase FIR Filters

• Fully networkable via Aurora Net

• On board HPF and EQ presets

• Multifunctional design

Speaker Type 2 Way Active Loudspeaker

Usable bandwidth [-10dB] 73 - 21.400 Hz

Frequency Response [-6dB] 82 - 20.0 00 Hz

Max SPL 130 dB

HF 1x 1”

Voice Coil HF 1.75”

LF 1x 10”

Voice Coil LF 2.5” Neodymium

Directivity (HxV) 90° x 40°

Horn Rotatable Horn

Amplifier 900 W RMS Class-D Digipro® G3

Cooling Convection

Power Supply Auto-range SMPS

Controller DSP 28/56 bit

AD/DA Converter 24 bit /48 kHz

Limiter Peak, RMS , Thermal

Processing FIR Linear Phase Filters

Signal Input 1x XLR balanced, 1x RJ45 Link (RDNet)

Signal Output 1x XLR balanced, 1x RJ45 Link (RDNet)

Power Socket 1x PowerCO N TRUE1 In

Controls 1x Rotary Encoder (8x EQ, HPF presets)

Special Features

Housing Wooden Cabinet, Polyurea painting

Handles 1x (top)

Wedge Angle Monitor use 50°

Rigging points 12x M10 Thread + 4x Fast lock pins

Pole Mount Ø36 mm

Width x Height x Depth 280 x 550 x 375 mm

Weight 16.6 kg (36.59 lbs)

1x USB Data Serv ice

1x PowerCON TRUE1 Out

1x Input sensit ivity potentiometer

1x Mic / line switch

Opto-isolated float ing pre-amp

(11.02 x 21.65 x 14.76 in)

Page 1 of 2

VIO X10 - rev. 1.0 2019

VIO X10

Datasheet

Overall DimensiOns

550

TranspOrT & insTallaTiOn accessOries

FC-VIOX 10

Functional cover available
for VIO X10

RC-M1

Amplifier magnetic rain
cover.

WB-VIOX10H

Horizontal wall bracket
for VIO X10.

280

375

WB-VIOX10V

Vertical bra cket for VIO
X10. 36 mm pole mount
included.

Page 2 of 2

VIO X10 - rev. 1.0 2019