dB Technologies B-Hype 10 operation manual
www.dbtechnologies.com info@dbtechnologies-aeb.com
Quick start user manual
The warnings in this manual must be observed together with the "USER MANUAL - Section 2".
Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO - Sezione2”.
Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG - Abschnitt 2" beobachtet
werden”.
Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES Section 2"
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” Sección 2”.
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com
B-HYPE 10 Rev 1.3 cod. 420120255Q
Section 1
www.dbtechnologies.com info@dbtechnologies-aeb.com
Thank you for choosing a dBTechnologies Product!
The new B-HYPE 10 is a versatile active speaker. It is equipped with one 1” compression driver (1” voice coil), and
one 10” woofer (1.5” voice coil). The dispersion pattern is asymmetrical on vertical axis, and it is diversified (top and
bottom) on the horizontal one. This allows a narrower and more efficient sound coverage, and a better performance
in case of reverberant environments. The combo input (with source type selection) allows an easy and versatile use,
suitable for a dynamic microphone and standard line input. The user can enhance lower and upper frequencies with
the convenient DSP preset function. A balanced link output allows the audio connection to a second loudspeaker.
Check the site www.dbtechnologies.com for the complete user manual!
1) Unpacking
The box contains:
N°1 B-HYPE 10
N°1 Mains cable (VDE)
This quick start and warranty documentation
2) Easy installation
B-HYPE 10 is equipped with:
The acoustical design allows to face different
environments. The dispersion pattern is asymmetrical
on the vertical axis, and the horizontal coverage varies
within position: It is wider in the lower side and narrow
in the upper one.
As shown in the upper picture, the related dispersion
pattern data are:
a) vertical coverage: 85° asymmetrical (+25°/-60°)
b) horizontal coverage: 85° in the upper part, 120° in
the lower one
A – Upper integrated handle
B – Lateral integrated handles
C – Pole mount hole
NEVER USE THE HANDLES TO SUSPEND
THE SPEAKER!
Those mechanical particulars were thought for an easy
use and for different configuration needs. B-HYPE 10 is
perfect for gigging bands as well as small venues
installations. The 36 mm pole-mount predisposition is
designed for the use on standard pole stand (like a
tripod).
The rear side inclination, symmetrical, as shown in the
upper picture, is 45°. The related wedge positioning is
shown in the picture. B-HYPE can be used as a stage
monitor in small contexts, in this case please consider
the characteristic dispersion pattern presented above.
IT IS MANDATORY TO READ AND
FULLY UNDERSTAND THE COMPLETE
USER MANUAL FOR THE ADMITTED
CONFIGURATIONS OF THE PRODUCT, SAFETY
INFORMATION, AND THE PROPER USE OF
ACCESSORIES (IF ANY).
B-HYPE 10 Rev 1.3 cod. 420120255Q
Loading...